Genevac miVac Centrifugal Concentrator System

ZYMARK TurboVap II Evaporation/Concentrator System The Turbovap 2 has 6 sample positions of 200 ml T (more)he TurboVap II Concentrator Workstation is a microprocessor-controlled concentrator that provides automated sample evaporation, unattended operation, convenience and speed. Water bath capacity: 6.4 L of distilled water Gas Supply Requirements: Minimum inlet pressure 30 psi/2.1 bar. Maximum inlet pressure 80 psi/5.5 bar. Power supply: 220–240 V~, 50 Hz, 5 A Dimensions (LxDxH): 53.8 cm x 30.5 cm x 30.5 cm / 21.2" x 12" x 12" Weight 18.4 kg/40.5 pounds Without tubes / Matra With traces of rust Functional heating system No leak optical sensor not checked

Labconco CentriVap Acid-Resistant Benchtop Concentrator Durable, acid-resistant components throu (more)ghout the vapor path Can be used with samples containing 0.1 to 1%TFA, hydrochloric acid, acetic acid, hydrobromic acid, ammonium hydroxide, and sodium hydroxide PTFE-coated aluminum chamber with glass lid, large phenol-free lid gasket and safety sensors Brushed, stainless steel and glacier white, epoxy-coated steel exterior w/blue accents 300-watt heater increases temperature in one degree increments up to 100C Quick-Start One Button Start Up to simultaneously activate rotor, heater, timers and vacuum pump Quick-Stop system stops vacuum pump, open valve and stop rotor Memory stores nine user-set programs Brushless motor spins up to 1725RPM Automatic vacuum release valve Easy-to-read LCD display Separate heat and run times, each from 1 to 999 minutes PREHEAT/COOL button to reach set point temperature Audible alarm signals completion of set point run time Electrical receptacle enables connection of accessory vacuum pump Vacuum pump has quick disconnect fitting for connection of a vacuum gauge 12 in. dia. Chamber accommodates a wide variety of rotors, including microtiter plate rotors for 96-well plates INCLUDED: The Labconco 7810016 CentriVap Acid-Resistant Benchtop Concentrator includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Benchtop Concentrator with Heat Boost Eliminates bumping and foaming, maximiz (more)es trace solute recovery Microprocessor-controlled 300w heater covers ambient to 100C in 1° increments Optional Heat Boost™ surrounds chamber with extra controlled heat at programmed temperature, in closer proximity to sample Electrical receptacle included for an accessory vacuum pump (available separately) Vacuum delay prevents bumping by allowing rotor to achieve speed before applying vacuum Quick-Start™ button starts rotor, heater, timers and pump Quick-Stop™ system stops pump, opens vacuum release valve and stops rotor in seconds after time expires or RUN/STOP button is pressed Memory stores nine user programs (temperature/heat time/run time); LCD shows operating parameters and programs Compact, low-profile design Choice of removable acrylic lid with large, durable lid seal, or glass lid for use with solvents that attack acrylics Safety latch locks lid when rotor is turning, prevents start-up when lid is open Corrosion-resistant sample chamber has epoxy finish for easy cleaning and decontamination Microprocessor-controlled brushless motor runs at up to 1725rpm Stacks on top of cold trap to save space With 0.5 in. O.D. vacuum tube fitting INCLUDED: The Labconco 7810012 CentriVap Benchtop Concentrator with Heat Boost, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap CompleteVacuum Concentrator with Heat BoostTheall-in-one CentriVap Complete Vacuu (more)m Concentrator houses every component youneed to begin processing multiple samples; vacuum concentrator, -50C coldtrap, diaphragm pump, rotor and CentriZap strobe light. Just add your samplesin the containers of your choice and start concentrating. Using centrifugalforce, vacuum and controlled heat, the CentriVap Complete speeds concentrationof samples used in a variety of applications found in molecular biology,proteomics, genomics, cell biology, microbiology, biochemistry, drug discoveryand analytical chemistry.Acid-resistantmodels are available for corrosive chemical use. Other models feature HeatBoost, which surrounds the chamber wall, to further speed evaporation of highboiling point solvents. Click Here to View Product Video INCLUDED: The Labconco 7315022 CentriVap CompleteVacuum Concentrator with Heat Boost, 115V, 60Hz includes: - Coupling Insert - Rotor, 12-13 mm - Glass Jar - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump The Eppendo (more)rf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump (catalog number 022820168) was designed with the customer in mind to deliver an ergonomic, intuitive and durable solution that fits comfortably right on the lab bench. The advanced heating technology provides best treatment for your sample which assures quick, efficient and gentle vacuum concentration of DNA/RNA, nucleotides, proteins and other liquid or wet samples. Our new coated lid provides superior chemical resistance against aggressive acids and organic solvents . INCLUDED: The Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump includes: - Power Cord - Operator's Guide - Full 6 Month Parts and Labor Warranty Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump SpecificationsVacuum20 hPa (20 mbar)Sample Capacitymax. 144 vessels/2 microplatesFixed Speed1,400 rpmTube Volume0.2-50mlVolume Range72mlPower Supply120 V, 50-60HzMax. Power Consumption350WDimensions (W x D x H)33 x 58 x 29cmWeight w/o accessories31.5kg

Rotor for Medium Capacity Concentrator RH24-18 Thermo Scientific Savant SpeedVac New equipment in it (more)s original packaging THERMO reference: RH24-18 Capacité : 18 x 52 mm Mini-scintillation / 24-place; 18 x 52mm mini scint vials For Use With (Equipment) : SPD1030, SPD120, SPD130, SPD140DDA

HACH LANGE LT 200 DCO heating block Model: LTG082.01.23002 LT200 Temperature: 37 to 150°C per 1°C Ti (more)me: 0-480 mins Heating: from 20°C to 150°C in 10 minutes Stability: +/-1°C Dimensions HxWxD: 145x250x310 mm Power supply: 220 V - 50/60 Hz - 600 VA Safety: maximum insulation, transparent protective cover locks, audible signal at end of program For 30 Ø13mm tubes Equipment tested at 120°C

Manufacturer: WAB Willy A. Bachofen AG Model: TURBULA® T2F three-dimensional Shaker Mixer MFG date:  (more)2010 Description: The TURBULA® three-dimensional shaker mixer is used for homogeneous mixing of powdery substances with different specific weights and particle sizes. The mixing basket can hold any form of container from test tubes up to containers having a maximum volume of 2 litres. The containers are secured by twisted rubber clamping rings. The basket movement is driven by a belt drive and an eccentric gear. It is also possible to mix wet and dry components or different wet components. The production process is hygienic and dust-free because the product is mixed in its own closed container. The exceptional efficiency comes from the use of rotation, translation, and inversion according to the Schatz geometric theory. The mixing container is set into three-dimensional movement that exposes the product to always changing, rhythmically pulsing motion. TURBULA® shaker mixer is used whenever minimum mixing times together with fulfillment of the highest homogeneity standards are required - in all industries, in research and development, and in production plants. Fields of application: - Diamond tools - Electrotechnology - Sintered metals - Ceramic industry - Cosmetic industry - Pharmaceutical industry - Chemical industry - Food industry - Analysis Specifications: - Minimum machine maintenance - Hygienic and dust-free processing - Easy cleaning - Minimum shear force - Producing dry-to-wet and wet-to-wet mixtures - Container volume of up to 2 litres - The rotational speed can be varied by adjusting the position of the round drive belt on the 5-step pulleys. - Time-saving, fast exchange of the container due to simple and fast mounting of the container. - Excellent homogeneity of the mixture due to interaction of rotation, translation and inversion as per the geometric theory according to Schatz. Features: - Motor: 0.18 kW - Connections: 1 x 220-240, 50/60 - Speed: 23/34/49/72/101 min-1 - Standard container sizes: max. 2 l - Container sizes with rubber clamping rings: max. Ø 130 x 215 mm - Dimensions of the machine (L x W x H): 501 x 608 x 393 mm - Weight of the machine: 37,5 kg - Weight of the operating unit: 4,4 kg Items delivered: - WAB TURBULA® T2F Shaker Mixer - Power Supply Condition: The entire system is in good cosmetic condition, 100 % functional tested and runs smoothly.

Ohaus 30400153 Modular Heat Block, 12 x 15/16 mm Tubes The Ohaus 30400153 Modular Heat Block, 12 x 1 (more)5/16 mm Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400153 Modular Heat Block, 12 x 15/16 mm Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus Guardian 2000 e-G21ST07R Magnetic Stirrer, 115V The Ohaus Guardian 2000 Series Hotplates, Stir (more)rers, and Hotplate Stirrers are ideal for education and other lab environments that require affordable, everyday fast heating and reliable stirring up to 15L. All three sizes offer simple knob control to easily adjust the heating and stirring functions. The durable housing includes a built-in support rod holder which accepts the optional support rod. Stirring models include PTFE coated stir bars. The Guardian 2000 Series units feature powerful stirring and fast heating at an economical price. Safely heat up to 500°C and stir up to 15L with easy-to-use knob control for simple and reliable everyday heating and stirring in the lab. Designed to last - the rugged metal housing has a spill resistant design for long life in the lab under harsh conditions. The smooth, chemical-resistant ceramic top plate is perfect for easy clean up. Safety is also of utmost importance, and the prominent hot top indicator light illuminates when the heater is above 40°C, keeping the end user safe during all heating applications. INCLUDED: The Ohaus Guardian 2000 e-G21ST07R Magnetic Stirrer, 115V includes: - PTFE-Coated Stir Bar (2.5 cm) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty