Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump

Labconco Glass Trap for CentriVap DNA Concentrator Liquid Trap prevent liquid from entering the pump (more). LiquidTrap Kit includes a borosilicate glass container that holds 240 milliliters ofliquid, an epoxy-coated steel bracket for attachment to the side of a CentriVapConcentrator or RapidVap Vacuum Evaporation System, 18" (45.7 cm) of 0.5ID (1.3 cm) vacuum tubing, and two vacuum tubing clamps. INCLUDED: The Labconco 7970500 Glass Trap for CentriVap DNA Concentrator includes: - Steel Bracket for Attachment to CentriVap - Vacuum Tubing - Clamps x 2 - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Benchtop Concentrator with Heat Boost Eliminates bumping and foaming, maximiz (more)es trace solute recovery Microprocessor-controlled 300w heater covers ambient to 100C in 1° increments Optional Heat Boost™ surrounds chamber with extra controlled heat at programmed temperature, in closer proximity to sample Electrical receptacle included for an accessory vacuum pump (available separately) Vacuum delay prevents bumping by allowing rotor to achieve speed before applying vacuum Quick-Start™ button starts rotor, heater, timers and pump Quick-Stop™ system stops pump, opens vacuum release valve and stops rotor in seconds after time expires or RUN/STOP button is pressed Memory stores nine user programs (temperature/heat time/run time); LCD shows operating parameters and programs Compact, low-profile design Choice of removable acrylic lid with large, durable lid seal, or glass lid for use with solvents that attack acrylics Safety latch locks lid when rotor is turning, prevents start-up when lid is open Corrosion-resistant sample chamber has epoxy finish for easy cleaning and decontamination Microprocessor-controlled brushless motor runs at up to 1725rpm Stacks on top of cold trap to save space With 0.5 in. O.D. vacuum tube fitting INCLUDED: The Labconco 7810012 CentriVap Benchtop Concentrator with Heat Boost, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco Refrigerated CentriVap Benchtop Concentrator with Glass Lid One FilterMate is capable o (more)f exhausting 24 in., 36 in. and 48 in. wide enclosures (22 3/4 in.H models) Powder-coated steel exterior base and rubber feet Quiet, nonsparking, variable-speed, motorized impeller Negative pressure plenum to capture and refilter leaked fumes One FilterMate is capable of exhausting 24 in., 36 in. and 48 in. wide enclosures (22 3/4 in.H models) Powder-coated steel exterior base and rubber feet Quiet, nonsparking, variable-speed, motorized impeller Negative pressure plenum to capture and refilter leaked fumes Programming holds two temperatures and times Setpoints for first and second temperatures and run times are selected separately PREHEAT/COOL button activates the refrigeration system and heater to reach setpoint temperature Set temperatures and times can be altered while a program is in process Memory stores up to nine user-defined programs Choose removable acrylic lid or solvent-resistant glass lid, each with large phenol-free lid gasket Utilize centrifugal force, vacuum and heat Brushed, stainless steel and glacier white, epoxy-coated steel exterior w/blue accents 300-watt heater increases temperature in one degree increments up to 100C Quick-Start One Button Start Up to simultaneously activate rotor, heater, timers and vacuum pump Brushless motor spins up to 1725rpm Quick-Stop system stops vacuum pump, open valve and stop rotor Automatic vacuum release valve Lid latch with safety sensors Easy-to-read LCD display Separate heat and run times, each from 1 to 999 minutes Audible alarm signals completion of set point run time Electrical receptacle enables connection of accessory vacuum pump Vacuum pump has quick disconnect fitting for connection of a vacuum gauge 12 in. dia. chamber accommodates a wide variety of rotors, including microtiter plate rotors for 96-well plates Click Here to View Product Video INCLUDED: The Labconco 7310022 Refrigerated CentriVap Benchtop Concentrator with Glass Lid, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Rotor for Medium Capacity Concentrator RH24-18 Thermo Scientific Savant SpeedVac New equipment in it (more)s original packaging THERMO reference: RH24-18 Capacité : 18 x 52 mm Mini-scintillation / 24-place; 18 x 52mm mini scint vials For Use With (Equipment) : SPD1030, SPD120, SPD130, SPD140DDA

miVac is a range of centrifugal concentrators capable of removing water and organic solvents from a  (more)variety of sample formats including tubes, microplates and vials. miVac systems are suitable for use with a wide range of solvents, from volatile organic types through to water and many medium boiling point solvents. The system is very simple to use, allowing samples to be safely concentrated or taken to complete dryness. The large clear display enables easy monitoring of time and temperature. The intuitive controls allow inexperienced users to get first-class results, while allowing more sophisticated programming for experienced workers. The simple, robust design ensures years of reliable service even when used intensively, such as in teaching or multi-user laboratories. To improve performance there are built-in special modes for working with water and alcohols. Performance is further enhanced through the use of the miVac SpeedTrap refrigerated condenser. Simplified operation with optimized programs for water, alcohol and other solvents Precise temperature control with timer and digital display up to a max of 60°C Various heating functions (preheating and heating of the interior) Plastic coated aluminum chamber and acrylic glass cover for better chemical resistance The rotors are easily interchangeable Compact systems are quiet when in use and up to 40% faster than comparable machines

METTLER TOLEDO Seven2Go pH meter ONE HANDED OPERATION Seven2Go's easy-to-reach buttons and sleek des (more)ign ensure convenient one-handed operation. Seven2Go's simplified menu, automatic sensor recognition and calibration reminder ensure users get high-quality data quickly and easily. AN INVESTMENT Seven2Go's IP67 design, low weight and rugged uGo carrying case ensure a long-lasting instrument that provides reliable data even in harsh conditions. ISM® Ready – Reduced chance of error When connecting any InLab ISM® (Intelligent Sensor Management) sensor, the instrument automatically recognizes the sensor and stores the sensor ID, serial number and last calibration data. IP67 - Rugged, weatherproof design With IP67 protection and drop test resistance, the new Seven2Go laptops can withstand harsh environments. TECHNICAL FEATURES: Parameter: pH; ORP Channel: Single channel Kit version: Ready-to-use measurement kit Sensor: InLab Expert Go-ISM PH measuring range: -2 - 20 PH Resolution: 0.01; 0.1 pH accuracy (±): 0.01 mV measurement range: 0 MV Resolution: 1 VM accuracy (±): 1 mV measurement range -1999..1999 mV Temperature range (2): -5°C - 105°C Temperature resolution: 0.1°C Temperature accuracy (±): 0.5°C. Portable: Yes Intelligent Sensor Management (ISM) Compatible: Yes Memory capacity: 200 measurements Degree of protection: Watertight and dustproof (IP67) Memory size 200 measurements

The Vortex ZX4 agitator is a modern and advanced vortex with variable speed and two operating modes, (more) sensor or continuous. Thanks to the revolutionary IR sensor mode, an infrared (IR) system detects the presence of the test tube and the instrument is activated automatically: less user operations, more comfort in the working environment Technopolymer structure and ergonomic design guarantee excellent chemical resistance and considerable stability on the laboratory bench, and can be used on many surfaces. Wide range of accessories. IR sensor, VELP patent VELP Scientifica is the only company in the world to supply the technological and revolutionary IR system: as soon as the test tube is detected by the sensor, the latter automatically activates the instrument, without the need for any pressure from the laboratory technician. Compared to the classic pressure mode, the patented IR sensor system guarantees a drastic reduction of the stresses perceived by the operator, increasing the comfort of the working environment. Flexibility, Numerous Accessories ZX4 is an extremely versatile solution, being able to be combined with a variety of platforms. The easy and safe attachment of the platforms is done with a simple push, and guarantees excellent performance in the mixing of many types of tubes and containers. - Variable speed operation, electronically controlled up to 3000 rpm - Wide choice of accessories for tubes, plates and bottles - Universal voltage / frequency model - The accessories adapt with a simple push - Excellent resistance to chemical agents thanks to the technopolymer casing - Excellent stability with zinc alloy base - Large, non-slip rubber feet to stay in the desired position - IP 42 protection against particles and liquids - Designed for maximum durability and backed by a 3-year warranty

Polyscience MM71MX1A110C MM7 Benchtop Chiller with Centrifugal Pump, 120V, 60Hz3D Visualization of t (more)he Polyscience Benchtop ChillerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. LM-Series and MM-Series Compact Chillers provide cooling power for demanding applications and serve as economical alternatives to tap water cooling systems. They feature a microprocessor-based controller, digital temperature display (C or °F), and simple operation and maintenance. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended. LM-Series and MM-Series Chillers are equipped with a magnetic drive centrifugal pump. Wetted parts within the recirculation system are brass, copper, stainless steel, EPDM rubber, Alcryn, nylon, PVC, and polyethylene. Features Precise and stable temperature control at low temperatures Large, easy to read LED display Space-saving, benchtop design Cooling at ambient temperatures as high as 35C Low flow shutoff and alarm, high and low temperature alarms Simple setup, operation, and maintenance Choice of two different centrifugal pumps Fluid level indicator RS232 communication and external water filter optional INCLUDED: The Polyscience MM71MX1A110C MM7 Benchtop Chiller , -5°C to 50°C, 460W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The Epsilon 1 is a fully integrated energy dispersive XRF analyzer consisting of a spectrometer, bui (more)lt-in computer, touch screen and analysis software. Powered by the latest advances in excitation and detection technology the Epsilon 1 is a star performer in the low-cost benchtop instrument class. Epsilon 1 produces fast, cost-effective, precise and accurate data with minimal operator dependence and sample preparation. The total running cost is therefore much lower than other analytical techniques such as AAS, ICP and wet chemical methods that are costly and also require a dedicated skilled operator. Sample Handling- Sample Type: Liquids, solids, slurries, loose powders, filters Sample Handling- Sample Positioning: Highly repeatable sample positioning Sample Handling- Spillage Protection: Spillage protection against powders and liquids X-Ray Tube- Window Type: High-stability ceramic side window X-Ray Tube- Window Size: 50 µm thin window (Be) for higher intensities X-Ray Tube- Max Voltage: Max voltage of 50 kV, ideal for analyzing heavier elements Detector- Resolution: High-resolution, typical 135 eV Detector- Window Size: 8 µm thin window (Be) for higher intensities Detector- Count Rate: High count rate detector capacity for faster analysis