Labconco 7315023 CentriVap Complete Acid-ResistantVacuum Concentrator with Heat Boost, 115V, 60Hz

ZYMARK TurboVap II Evaporation/Concentrator System The Turbovap 2 has 6 sample positions of 200 ml T (more)he TurboVap II Concentrator Workstation is a microprocessor-controlled concentrator that provides automated sample evaporation, unattended operation, convenience and speed. Water bath capacity: 6.4 L of distilled water Gas Supply Requirements: Minimum inlet pressure 30 psi/2.1 bar. Maximum inlet pressure 80 psi/5.5 bar. Power supply: 220–240 V~, 50 Hz, 5 A Dimensions (LxDxH): 53.8 cm x 30.5 cm x 30.5 cm / 21.2" x 12" x 12" Weight 18.4 kg/40.5 pounds Without tubes / Matra With traces of rust Functional heating system No leak optical sensor not checked

Labconco CentriVap DNA Centrifugal Concentrator Centrifugal force and vacuum rapidly evaporate s (more)olvents from multiple small samples DNA rotor holds seventy-two 0.5mL sample tubes or sixty 1.5 or 2.0mL sample tubes Memory stores nine user-set programs Corrosion-resistant diaphragm pump achieves vacuum of 7 mBar; has pumping capacity of 34L/min. Heat and run times set separately, each from 1 to 999 minutes so that heat may be programmed to shut down sooner than run to protect heat-sensitive samples from excessive heat exposure after solvent evaporates Large phenol-free lid seal ensures good vacuum without potential for phenol contamination Easy-to-read LCD display prompts user to set program parameters and displays program number, actual and set point temperatures, point heat, and run time remaining INCLUDED: The Labconco 7970010 CentriVap DNA Centrifugal Concentrator, 115V, 60Hz includes: - DNA Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Benchtop Concentrator with Glass Lid Eliminates bumping and foaming, maximize (more)s trace solute recovery Microprocessor-controlled 300w heater covers ambient to 100C in 1° increments Optional Heat Boost™ surrounds chamber with extra controlled heat at programmed temperature, in closer proximity to sample Electrical receptacle included for an accessory vacuum pump (available separately) Vacuum delay prevents bumping by allowing rotor to achieve speed before applying vacuum Quick-Start™ button starts rotor, heater, timers and pump Quick-Stop™ system stops pump, opens vacuum release valve and stops rotor in seconds after time expires or RUN/STOP button is pressed Memory stores nine user programs (temperature/heat time/run time); LCD shows operating parameters and programs Compact, low-profile design Choice of removable acrylic lid with large, durable lid seal, or glass lid for use with solvents that attack acrylics Safety latch locks lid when rotor is turning, prevents start-up when lid is open Corrosion-resistant sample chamber has epoxy finish for easy cleaning and decontamination Microprocessor-controlled brushless motor runs at up to 1725rpm Stacks on top of cold trap to save space With 0.5 in. O.D. vacuum tube fitting INCLUDED: The Labconco 7810014 CentriVap Benchtop Concentrator with Glass Lid, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap CompleteVacuum Concentrator with Heat BoostTheall-in-one CentriVap Complete Vacuu (more)m Concentrator houses every component youneed to begin processing multiple samples; vacuum concentrator, -50C coldtrap, diaphragm pump, rotor and CentriZap strobe light. Just add your samplesin the containers of your choice and start concentrating. Using centrifugalforce, vacuum and controlled heat, the CentriVap Complete speeds concentrationof samples used in a variety of applications found in molecular biology,proteomics, genomics, cell biology, microbiology, biochemistry, drug discoveryand analytical chemistry.Acid-resistantmodels are available for corrosive chemical use. Other models feature HeatBoost, which surrounds the chamber wall, to further speed evaporation of highboiling point solvents. Click Here to View Product Video INCLUDED: The Labconco 7315022 CentriVap CompleteVacuum Concentrator with Heat Boost, 115V, 60Hz includes: - Coupling Insert - Rotor, 12-13 mm - Glass Jar - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco Refrigerated CentriVap Benchtop Concentrator with Glass Lid, North America Plug & Recep (more)tacleUsingcentrifugal force, vacuum and controlled heat, the Acid-Resistant CentriVapVacuum Concentrator rapidly concentrates multiple small samples containingchemicals such as 0.1 to 1% TFA, hydrochloric acid, acetic acid, hydrobromicacid, ammonium hydroxide and sodium hydroxide. Components in the vapor path areconstructed of corrosion-resistant materials for long life. Click Here to View Product Video INCLUDED: The Labconco 7310042 Refrigerated CentriVap Benchtop Concentrator with Glass Lid, North America Plug & Receptacle includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Rotor for Medium Capacity Concentrator RH24-18 Thermo Scientific Savant SpeedVac New equipment in it (more)s original packaging THERMO reference: RH24-18 Capacité : 18 x 52 mm Mini-scintillation / 24-place; 18 x 52mm mini scint vials For Use With (Equipment) : SPD1030, SPD120, SPD130, SPD140DDA

Julabo DYNEO DD-300F Refrigerated Circulator, 115V/60Hz (NRTL Certified) Refrigerant R134a Working  (more)Temperature Range -25°C - 200°C Cooling Capacity 300W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe DYNEO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations afford low temperature capabilities from -20 °C to -50 °C with an upper temperature limit of 200 °C. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB connection for external PC control and data-logging with digital options including RS232 port or an analog module interface for voltage or current control. PID temperature control provides ±0.01 °C stability. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tanks with integrated drain port.Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-300F Refrigerated Circulator, 115V/60Hz (NRTL Certified) includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA RCT Basic Magnetic Hotplate Stirrer Speed Range 50 - 1500 rpm Temperature Setting Range 0 - 310 (more) °C Heat Output 600 Watts Features - Tempered shatterproof glass surface for optimal chemical resistance and easy cleaning - Largest display in its class with easy-to-read LED display - Illuminated symbols for displaying important status information (set and actual temperature, heating status, temperature sensor - USB and RS232 interface for control or documentation of the test parameters via a PC - Compatible with Labworldsoft® laboratory software - QR code for quick access to device information, accessories, downloads and extended warranty - Easily accessible main switch on the front of the device For almost half a century, the RCT Basic Magnetic Hotplate Stirrer has not only been IKA’s bestseller, but also the standard in a reference device in laboratories and research facilities worldwide. The RCT Basic Magnetic Hotplate Stirrer stands for reliability, exceptionally long product lifetimes and the highest safety standards. The RCT Basic is suitable for stirring tasks up to 20L (H2O) and reaches a hotplate temperature of up to 310°C. With the connection option for an external temperature sensor (PT 1000.60 included in delivery), the temperature can be measured and controlled directly in the reaction medium. Thanks to perfect insulation of the aluminum heating plate, maintenance-free EC motor and electronic switching power supply, RCT basic features excellent energy efficiency as well as reduced self-heating of the heating plate during stirring operation, thus contributing to a more sustainable laboratory. In the latest generation, RCT Basic presents itself in proven quality and with numerous new features: Click Here to View Product Video INCLUDED: The IKA RCT Basic Magnetic Hotplate Stirrer includes: - IKAFLON 30 Magnetic Stirring Bar - IKAFLON 40 Magnetic Stirring Bar - PT 1000.60 Temperature Sensor, Stainless Steel - Screw Driver - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z327-200 4 x 200 ml Swing Out Rotor, with 4 Buckets The Hermle Z327-200-AC 4 x 200 ml Swing O (more)ut Rotor is for use with Hermle Z327 and Z327-K centrifuges. This rotor has a maximum speed of 5,000 RPM, and a maximum capacity of 4 x 200 ml. Its wide variety of adapters make it an adaptable option for a wide variety of applications and research needs. INCLUDED: The Hermle Z327-200 4 x 200 ml Swing Out Rotor, with 4 Buckets includes: - Hermle Z327-200-AC 4 x 200 ml Swing Out Rotor - 4 x 200 ml Buckets - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Agilent 1100 system consisting of: 1x Agilent 1100 Degasser type G1379A 2x Agilent 1100 Isocratic Pu (more)mp type G1310A 1x Agilent 1100 Variable Wavelength Detector type G1314A 1x Agilent 1100 Fluorescence Detector type G1321A 2x Solvent tray Manual injector with 1 ml sample loop Laptop Agilent 1100 IsoPump: Hydraulic system: Dual piston in series pump with proprietary servo-controlled variable stroke drive, floating pistons and active inlet valve Setable flow range: 0.001 – 10 ml/min, in 0.001 ml/min increments Flow range: 0.2 – 10.0 ml/min Flow precision: < 0.3 % RSD (typically 0.15 %), based on retention time, at 1 ml/min Pressure: Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5880 psi) up to 5 ml/min, Operating range 0 – 20 MPa (0 – 200 bar, 0 – 2950 psi) up to 10 ml/min Pressure pulsation: < 2 %amplitude (typically < 1 %), at 1 ml/min isopropanol, at all pressures > 10 bar (147 psi) Compressibility compensation: User-selectable, based on mobile phase compressibility Recommended pH range: 1.0 – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel Dimensions (HxWxD): 140 x 345 x 435 mm Weight: 11 kg Agilent 1100 VWD: Detection type: Double-beam photometer Light source: Deuterium lamp Wavelength range: 190–600 nm Short term noise (ASTM): ± 0.75 x 10-5 AU at 254 nm Drift: 3 x 10-4 AU/hr at 254 nm Linearity: > 2 AU (5%) upper limit Wavelength accuracy: ± 1 nm Self-calibration with deuterium lines, verification with holmium oxide filter Band width: 6.5 nm typical Flow cell: 14-µl volume, 10-mm cell path length and 40 bar (588 psi) pressure maximum Dimensions (HxWxD): 140 x 345 x 435 mm Weight: 11 kg Agilent 1100 FLD: Detection type: Multi-signal fluorescence detector with rapid on-line scanning capabilities and spectral data analysis Light source: Xenon flash lamp Pulse frequency: 296 Hz for single signal mode, 74 Hz for spectral mode Excitation monochromator: range; 200 – 700 nm and zero-order,  bandwith; 20 nm, monochromator; concave holographic grating F/1.6 blaze 300 nm Emission monochromator: range; 280 – 900 nm and zero-order,  bandwith; 20 nm, monochromator; concave holographic grating F/1.6 blaze 400 nm Spectrum acquisition: Excitaiotn or emmision spectra, scan  speed; 28 ms per data point, step size; 1 – 20 nm Wavelength characterisric: Repeatability; ±0.2 nm, accuracy; ±3 nm Flow cell: 8 µl volume and 20 bar pressure, quartz Dimensions (HxWxD): 135 x 345 x 435 mm Weight: 11.5 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW