Labconco 7315022 CentriVap CompleteVacuum Concentrator with Heat Boost, 115V, 60Hz

Barnstead GeneVac MiVac DNA Concentrator This item was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in good cosmetic condition. 48-well aluminium rotor which holds:1.5/2ml centrifuge tubes

Labconco CentriVap DNA Centrifugal Concentrator Centrifugal force and vacuum rapidly evaporate s (more)olvents from multiple small samples DNA rotor holds seventy-two 0.5mL sample tubes or sixty 1.5 or 2.0mL sample tubes Memory stores nine user-set programs Corrosion-resistant diaphragm pump achieves vacuum of 7 mBar; has pumping capacity of 34L/min. Heat and run times set separately, each from 1 to 999 minutes so that heat may be programmed to shut down sooner than run to protect heat-sensitive samples from excessive heat exposure after solvent evaporates Large phenol-free lid seal ensures good vacuum without potential for phenol contamination Easy-to-read LCD display prompts user to set program parameters and displays program number, actual and set point temperatures, point heat, and run time remaining INCLUDED: The Labconco 7970010 CentriVap DNA Centrifugal Concentrator, 115V, 60Hz includes: - DNA Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Benchtop Concentrator with Glass Lid Eliminates bumping and foaming, maximize (more)s trace solute recovery Microprocessor-controlled 300w heater covers ambient to 100C in 1° increments Optional Heat Boost™ surrounds chamber with extra controlled heat at programmed temperature, in closer proximity to sample Electrical receptacle included for an accessory vacuum pump (available separately) Vacuum delay prevents bumping by allowing rotor to achieve speed before applying vacuum Quick-Start™ button starts rotor, heater, timers and pump Quick-Stop™ system stops pump, opens vacuum release valve and stops rotor in seconds after time expires or RUN/STOP button is pressed Memory stores nine user programs (temperature/heat time/run time); LCD shows operating parameters and programs Compact, low-profile design Choice of removable acrylic lid with large, durable lid seal, or glass lid for use with solvents that attack acrylics Safety latch locks lid when rotor is turning, prevents start-up when lid is open Corrosion-resistant sample chamber has epoxy finish for easy cleaning and decontamination Microprocessor-controlled brushless motor runs at up to 1725rpm Stacks on top of cold trap to save space With 0.5 in. O.D. vacuum tube fitting INCLUDED: The Labconco 7810014 CentriVap Benchtop Concentrator with Glass Lid, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap CompleteVacuum ConcentratorTheall-in-one CentriVap Complete Vacuum Concentrator h (more)ouses every component youneed to begin processing multiple samples; vacuum concentrator, -50C coldtrap, diaphragm pump, rotor and CentriZap strobe light. Just add your samplesin the containers of your choice and start concentrating. Using centrifugalforce, vacuum and controlled heat, the CentriVap Complete speeds concentrationof samples used in a variety of applications found in molecular biology,proteomics, genomics, cell biology, microbiology, biochemistry, drug discoveryand analytical chemistry.Acid-resistantmodels are available for corrosive chemical use. Other models feature HeatBoost, which surrounds the chamber wall, to further speed evaporation of highboiling point solvents. Click Here to View Product Video INCLUDED: The Labconco 7315020 CentriVap CompleteVacuum Concentrator, 115V, 60Hz includes: - Coupling Insert - Rotor, 12-13 mm - Glass Jar - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Rotor for Medium Capacity Concentrator RH24-18 Thermo Scientific Savant SpeedVac New equipment in it (more)s original packaging THERMO reference: RH24-18 Capacité : 18 x 52 mm Mini-scintillation / 24-place; 18 x 52mm mini scint vials For Use With (Equipment) : SPD1030, SPD120, SPD130, SPD140DDA

Thermo Scientific Electron Finnpipette 50µl Laboratory Pipette Fixed volume pipette 50µl Volume: 50  (more)µl Not calibrated Test performed using a 10-4 g (0.1mg) balance: Reading (in g) for 50 µl: 0.051

Temp. range 5 – 40°C LCD 5 digits Altitude up to 2000m Max relative humidity 80% Including replac (more)ement marker tips

This BMG Lab Technologies Fluostar Galaxy Microplate Reader was removed from a university lab where  (more)it was surplus to requirements. The unit powers up but would not connect to a PC (not included) when we tried to test it. Other units would connect to this same PC, so we are sure it is the unit itself at fault, and not the PC. It is in otherwise good cosmetic condition with minor marks but is sold for spares/repairs.

Yamato DP-104C Large Capacity Programmable Vacuum Oven 1000L, 480V, 3 Phase Operating Temperature Ra (more)nge 40 to 200°C Operating Pressure Range 101 - 0.1kPa (760 - 1 Torr) Internal Capacity 1000L Features - Vacuum pump can be installed inside the oven - Quick connect / disconnect of vacuum pipes for easy vacuum pump maintenance - Improved working efficiency as exhaust system is improved to significantly shorten the time to reach vacuum - Use specialized function menu key and up/down key to set. With program operation function, use submenu key to operate overheat protector, deviation correction, etc. - Self-diagnosis circuit (abnormal temperature sensing, heater disconnection, auto overheat prevention, SSR short circuit), overheat protector, ELB to prevent overcurrent, key lock, etc. - For safety, resin protection panel is installed at the observation window Large scale 1000L vacuum drying oven designed for treatment of large-sized parts. Quick connect / disconnect of vacuum pipes for easy vacuum pump maintenance. Because the exhaust system is improved to significantly shorten the time to reach vacuum, working efficiency is improved. Use specialized function menu key and ▲▼ key to set. With program operation function, use submenu key to operate overheat protector, deviation correction, etc. Vacuum pump can be installed inside the oven. Operating temp. range of 40~200° CINCLUDED: The Yamato DP-104C Large Capacity Programmable Vacuum Oven 1000L, 480V, 3 Phase includes: - Stainless Steel Punching Plates, 4 pcs. - Power Cord - 1 Year Manufacturer's Warranty

Peristaltic pump with Watson Marlow 314B head. Four rollers for 1.6 mm wall thickness tubes, adjusta (more)ble clamps for 1.6, 3.2, 4.8, 6.4, 8 mm diameter tubes. Maximum continuous flow rate 1200 mL/min. Maximum continuous operating speed 400 rpm. The Watson-Marlow 314B peristaltic pump head has a sleek design for fast, error-free tube loading, making it a popular choice for many medical and cell culture applications. The pump head can be expanded to provide six separate channels depending on the drive torque. The most popular are the 3 and 4 roller versions. Up to eight rollers can be used for minimal pulsation and maximum precision.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).