Eppendorf Centrifuge concentrator plus 5305

Embossed foil keypad for simple operation Short-spin function with pre-selected rotational speed rpm (more) or rcf settings as required (from 500 rpm in steps of 100 rpm) Timer up to 99 min or continuous run Soft key for gentle acceleration and deceleration Automatic imbalance detection Equipped with a Eppendorf F-45-30-11 fixed angle rotor. Rotor has a 30x 3,75 g capacity and a max rpm of 14000. Max. rotational speed: 14,000 rpm Max. load: 30 x 2.0 ml Safe-Lock Microcentrifuge Tubes Max. density of material to be centrifuged: 1.2 g/ml Max. kinetic energy: 6,100 Nm Dimensions (HxWxD): 228 x 310 x 430 mm Weight: 17 kg

Maximum capacity: 12 L Maximum speed: 10500 rpm Mininum speed: 100 rpm Maximum kinetic energy: 279 K (more) Nm Temperature setting range:  -20°C to 40°C Minimal rotor temperature at 23°C ambient temperature: < 4°C Dimensions (HxWxD): 980 x 810 x 910 mm Weight: 420 kg Rotor is not included in scope of delivery. Please order separately! See for additional ionfo: https://www.sigma-centrifuges.co.uk/files/2011/09/Sigma-8KB-11-2010_E.pdf

Beckman Coulter Rotor Type 50.2 Ti This item was removed from a university where it was surplus to r (more)equirement. It is in good cosmetic condition, we are unable to test it further at our facility. Features:- Type - 50.2 Ti - Max RPM - 50,000 - The Unit Has 12 x Slots For Vials - Only Use in Instruments Classified H, R, S

This Eppendorf 5810R Refrigerated Laboratory Centrifuge was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in good cosmetic condition. It is in good working order. Tested with the A-4-62 rotor fitted, it ran smoothly up to, 4000rpm. The centrifuge was last serviced by an engineer on 11.07.23 All additional items included: 1 x Eppendorf A-4-62 Swing Bucket Rotor4 x MTP swinging plate buckets 4 x 250 ml rectangular plate buckets8 x tube holders 1.2-5ml 25 wells2 x 15ml bucket adapters 9 wells

Hermle Compact Centrifuge with Combination RotorFeatures - Microprocessor with large LCD display - E (more)lectrical lid lock - Quick access to samples - Active imbalance identifi cation and cut-off - Air Cooling System - Quick Acceleration and Deceleration - Noise level &lt; 60 dBA, at max. speed - Easy removal of rotor, without tools - Manufactured in accordance to International - Safety Regulations, i.e. IEC 61010 The Z207-A-CMB includes a convenient combination rotor that holds 4 x 15 ml and 4 x 50 ml tubes in the same rotor. With the combination rotor there's no longer a need switch rotors, or use adapters to centrifuge 15 ml and 50 ml tubes for tissue culture. You can even process them simultaneously! Along with the unique combination rotor, the Z207-A-CMB features the unique EZ-Scroll™ touch pad which gives you ease of control and a modern feel. An advanced microprocessor control allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust accel/decel rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally the Z207-A-CMB features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily. INCLUDED: The Hermle Compact Centrifuge with Combination Rotor includes: - Combination Rotor - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

General purpose shaker with microprocessor control, ideal for basic mixing applications, staining te (more)chniques, staining and bleaching. Variable speed control provides a consistent, uniform shaking action. The speed is adjustable via a knob with 1 to 10 rotary knobs and the ramping function slowly increases the speed to the set point for added safety. Suitable for continuous use To be used at 0 to +40 °C (maximum 80% relative humidity, non-condensing), in an incubator, CO₂ incubator or cold store. Speed: 40 – 300 rpm Shaking motion: Circular motion Amplitude: 15 mm Platform (WxD): 222 x 299 mm Maximum load: 3.6 kg Dimensions (W×D×H): 280 x 430 x 102 mm Weight: 10 kg

IKA C 6000 Automated Calorimeter Global Standards Package 2/12 Measuring Range Max. 40000 J Reproduc (more)ibility Dynamic (1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Automatic ignition and ignition determination - Automatic water filling and draining - Automatic oxygen filling, venting and flushing - RFID technology for automatic decomposition vessel identification - New design of the decomposition vessel allowing easier and faster sample preparation - Easy and convenient capacitive touch screen operation - Control chart view and correction calculation of globally used standards - Ethernet interface to connect a network printer - USB interface allowing easy data management and software updates - This Package 2/12 includes a halogen resistant decomposition vessel C 6012 with catalytically active surface leading to higher recovery rates on halogens and sulfur The IKA C 6000 Automated Calorimeter Global Standards Package 2/12 sets a new benchmark in precision and efficiency for modern calorimetry. This advanced system operates seamlessly across adiabatic, isoperibolic, and dynamic measuring modes, offering flexibility to suit diverse laboratory requirements. Users can select from three starting temperatures (22°C, 25°C, 30°C) to optimize measurements, all while adhering to globally recognized standards such as DIN, ISO, ASTM, and GB. Featuring a redesigned decomposition vessel, this package enhances sample preparation efficiency and recovery rates for halogens and sulfur, thanks to its catalytically active, halogen-resistant surface. Please note that while this system is compatible with the RC 2 Basic Chiller for optimal cooling performance, the chiller is not included with this package. Streamlined automation defines the C 6000, incorporating automatic ignition, oxygen filling, and water handling for effortless operation. The capacitive touchscreen ensures intuitive navigation, while the built-in RFID technology provides automatic identification of decomposition vessels for enhanced accuracy. With robust data management capabilities via Ethernet, USB, and RS232 interfaces, this calorimeter simplifies integration into existing workflows and supports comprehensive analysis. The included control chart view and correction calculation features further reinforce compliance with globally applied standards. This Package 2/12 includes the halogen-resistant decomposition vessel C 6012, making it ideal for laboratories demanding high precision in sulfur and halogen analysis. Compact and efficient, with dimensions of 19.7 x 16.7 x 17.7 inches and a weight of 88.5 lbs, the IKA C 6000 ensures optimal performance within a permissible temperature range of 20°C to 30°C. Whether for research, industrial, or quality control applications, this package delivers the reliability and adaptability necessary for advanced calorimetry. INCLUDED: The IKA C 6000 Automated Calorimeter Global Standards Package 2/12 includes: - C 6012 Decomposition Vessel, Halogen Resistant - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Stratasys Objet30 V2 Pro Desktop 3D Printer With Software Lab This item was removed from a universit (more)y where it was surplus to requirement. It is in excellent cosmetic condition and powers on, the previous client reported it was fully functional when last used and was flushed of its resin. Also included are the following: - 1 x Objet30 Software and Drivers SET-2400: - 1 x Objet30 Printer Ver. 30.2.1.5896 - 1 x Objet24/30 Studio Ver. 8.5.9.3 - 1 x Machine Parameters SWR-500 - 1 x Objet24/30 Image Disk Ver. 2.0 - 1 x full user manual - 1 x Aten Masterview KVMP Switch Model CS-1732A&nbsp;Serial No. Z3D2P108BF0222 - 1 x Adaptor VGa to DVI&nbsp;Part No. 10032003 - 5 x Data leads - 2 x Wiper blades Part No. 04280 - 1 x Loupe Magnification x10 Part MSC-00086 - 1 x Waste cape Part MSC-00063 - 2 x Scrapers

XA 110.5Y.F Analytical Balances for Filters XA 5Y.F Analytical Balances are used to determine absorp (more)tion in the process of differential filter mass measurement with the highest readability [d] of 0.01 mg. For this reason, in addition to the regular weighing pan, XA 5Y.F balances have a weighing pan for filters. The devices are also equipped with a manually opened weighing chamber and use a semi-automatic levelling system. Semi-automatic Leveling System Semi-automatic levelling, the so-called LevelSENSING System, has a great advantage over the manual levelling, in the case of the former one the user is prompted in which direction to level the balance. This shortens the very process. 5Y PLUS Balances (Smart Min Weight, Integrated Ionizer, Two-Point Adjustment and Much More) &ndash; You Have It Already. With ELLIPSIS Balances, You Have the Same and More: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance&rsquo;s accuracy and sensitivity. 10-Inch Display Bigger screen &ndash; 10&rsquo;&rsquo; &ndash; means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light &ndash; An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note &ndash; Note Down Your Conclusions It&rsquo;s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Accuris W3300-5K - Compact Balance, 5000 grams, readability 0.1 grams, 115V Accuris Compact balances (more) have been designed to meet the basic needs of academic and research labs requiring weight determinations in increments of 0.01g to 0.1 g. Their reliable and precise weighing technology utilizes gold-plated, ceramic capacitors to determine sample mass.Accuris Compact balances have been designed to meet the basic needs of academic and research labs requiring weight determinations in increments of 0.01g to 0.1 g. Their reliable and precise weighing technology utilizes gold-plated, ceramic capacitors to determine sample mass.The Compact line includes 6 models covering a wide range of maximum weight capacities. The lower capacity units (120g, 300g, and 500g) are readable to 0.01 g and come with a draft shield ring to prevent air currents from affecting measurements. These models feature a 4.5-inch diameter, stainless steel weigh pan. The larger capacity models (1000g, 5000g, and 10,000g) do not include the draft shield ring, come with larger weighing pans of 6.3 to 7-inch diameter, and are readable to 0.1g.All balances in the Accuris Compact line offer large, brightly lit LCD panels, and are easy to operate using the intuitive and splash-resistant control panel. Different modes allow weight to be displayed in various units: grams, ounces, carats, and simple programs can be used for piece counting and percent deviation weighing.Leveling feet are located toward the front of the balance for easy access, and a leveling bubble in the control panel is easy to see for quick and simple leveling on the lab bench. The balances can be calibrated using a calibration weight and a few keystrokes on the control panel – just select a calibration point in the calibration mode, place the calibration weight onto the weighing pan, and press the “CAL” button.Lightweight, and small in size, Accuris Compact balances will provide years of trouble-free service.INCLUDED: The Accuris W3300-5K - Compact Balance, 5000 grams, readability 0.1 grams, 115V includes: - Weighing Pan - Power Cord - One Year Manufacturer's Warranty