General laboratory equipment

Beckman Coulter Optima XPN-100K Ultracentrifuge Lab This item was removed from a university where it (more) was surplus to requirement. It is in very good cosmetic condition and full working order. It has been professionally serviced, the full report is available on request. This item was tested with an in-house rotor (Beckman 70.1Ti). This rotor is not included in the sale.

This listing is for 1 of 4 Kinbio Tech YK1225-Shanghai Assembly Roller Conveyor

This listing is for a Oxford XB220A-i Balance. The unit is in full working condition and is ready f (more)or immidate realese. Features -High Precision Technology -Easy Operation draft Shield -Maximum User Friendliness -Large Vacuum Fluorescent Display -Die-cast Aluminum Housing -lP65 protection available against ingress of dust and water available Capacity: 220g

This listing is for a Memmert Double Door Incubator. The unit is in full working condition and is r (more)eady for immidate realese. The Memmert Double Door Incubator is a cutting-edge, high-precision incubator designed to meet the rigorous demands of microbiological laboratories, research facilities, and applications requiring controlled temperature environments. Its innovative double-door design offers optimal visibility and easy access while maintaining consistent internal conditions, preventing contamination and ensuring precise, reliable results. Key Features: Double Door Design: Fully insulated stainless steel doors ensure superior temperature control and easy access without heat loss or contamination risks. Advanced Temperature Control: Available with energy-efficient Peltier Technology or compressor-cooling systems for precise, uniform temperature regulation. Wide Temperature Range: Adjustable from 0°C to +70°C (or +80°C for select models), ideal for a variety of sensitive research and incubation applications. Optimum Temperature Distribution: Rapid energy transfer ensures uniform heat distribution and prevents condensation and sample drying. Quiet, Low-Vibration Operation: Designed for noise-sensitive environments, maintaining quiet and stable performance. User-Friendly Interface: Features Memmert’s intuitive ControlCOCKPIT with optional AtmoCONTROL software for easy programming, control, and monitoring. Benefits: The Memmert Double Door Incubator provides exceptional temperature accuracy, making it ideal for microbiology, cell culture, and other temperature-sensitive processes. This listing is for a. The unit is in full working condition and is ready for immidate realese.The double-door construction allows for easy sample observation and access, while the insulated design ensures minimal temperature deviations. With advanced ventilation technology, energy efficiency, and quiet operation, this incubator enhances productivity and ensures the protection of sensitive samples. Its compatibility with logging and control software offers advanced data tracking and optimization for long-term experiments. Technical Specifications: Temperature Range: 0°C to +70°C (up to +80°C for some models) Construction: Stainless steel, fully insulated Controller: ControlCOCKPIT with optional AtmoCONTROL integration Operation: Energy-efficient Peltier or compressor-cooling systems Defrost Function: Available in select models Quiet Operation: Low-vibration performance Choose the Memmert Double Door Incubator for unmatched precision, energy efficiency, and ease of use, making it the ideal incubator for advanced laboratory applications.

This listing is for a Thermo Scientific Heraeus Megafuge 8R Refrigerated centrifuge. The unit is in (more) full working condition and is ready for immidate realese. Unlock unparalleled performance in your laboratory with the Thermo Scientific Heraeus Megafuge 8R Refrigerated Centrifuge. This compact, benchtop centrifuge is meticulously engineered for both clinical and research applications, providing exceptional versatility and reliability. Key Features: Refrigerated Operation: Maintain precise temperature control from -10°C to +40°C, ensuring optimal sample preservation during centrifugation. High-Speed Capability: Achieve a maximum speed of 17,850 rpm and a maximum relative centrifugal force (RCF) of 30,279 x g (rotor-dependent), perfect for efficient sample separation. Generous Capacity: Accommodates a variety of sample formats, including 8 x 50mL conical tubes, 24 x 5/7mL blood tubes, and microplates, making it ideal for diverse applications. User-Friendly Interface: The smart interface simplifies operation, while the auto-lock rotor exchange system ensures secure and convenient rotor changes. ClickSeal Biocontainment Lids: Experience one-handed operation with certified sample protection, enhancing safety and ease of use. Benefits: Designed for a wide array of applications—ranging from clinical chemistry and diagnostics to advanced life sciences research—the Megafuge 8R streamlines workflows, saving you time and increasing productivity. Its robust safety features, including SMARTSpin imbalance detection, ensure reliable operation. Technical Specifications: Dimensions: 12.6 x 18.1 x 26.4 inches Net Weight: 156 lb (71 kg) Noise Level: <52 dBA (with MicroClick 24 x 2 rotor) Electrical Requirements: 120V, 60Hz Wattage: 750W

This listing is for a Hettich EBA 12 Centrifuge. The unit is in full working condition and is ready (more) for immidate realese. The Hettich EBA 12 Centrifuge is a laboratory centrifuge designed for separating substances or mixtures with a maximum density of 1.2 kg/dm³. It is suitable for various applications, including serology, cell washing, and pelleting particles from suspension. Technical specifications Voltage: 220-240V, 50 / 60Hz Current: 2,2A Power: 350W Maximum speed: 18000 rpm Technical specifications rotor Rotor number: 1118 Maximum rotor speed: 5000 rpm Dimensions tubes (∅) x (H): 1.5 x 6.5 cm   External dimensions (W) x (D) x (H): 27 x 32 x 25 cm

This listing is for a AdvanDx PNA Fish Workstation Dry Bath IncubatorThe AdvanDx PNA FISH Workstatio (more)n provides a hybridization incubation platform for PNA FISH applications.The AdvanDx PNA FISH Workstation can hold up to 30 microscope slides.

This listing is for a Amersham Biosciences AKTA Purifier 100 / FRAC-950 Fraction Collector

This listing is for a Leosmak LEO-004 Compact Freeze Dryer sold through ULMfreezedryers.comWe are st (more)ock holders in UKPrice before VAT - £3,600The Leosmak LEO-004 Compact Freeze Dryer offers a cost-effective way to preserve food, helping you save up to 30% on grocery bills by reducing waste. Whether you're preparing meals for camping trips, emergencies, or simply extending the shelf life of seasonal produce, this freeze dryer meets all your culinary needs.What’s IncludedLEO-007 Freeze Dryer.6 trays. Drainage hose with connector.1 litre of oil.Spare temperature sensor. Leosmak bag.Operating manual.Catalogue.Features 6 shelves, 6 trays, 0,7 m2 shelf area.20 or 40mm trays available .Freeze dry 7KG fresh food per batch.GN 2/3 Stainless steel trays.Freezing and heating range: -45°C - +70°C.Short Freeze Drying Time: Our advanced technology ensures efficient and rapid freeze drying, preserving the quality of your food.100% Stainless Steel Construction: Durable, easy to clean, and designed to withstand rigorous use while maintaining hygiene.Washable Chamber: No electrical components in the chamber means easy maintenance and enhanced safety.Plug and Play Operation: Simple setup allows you to start freeze drying immediately, even in a home environment.Low Noise Operation: Designed for quiet performance, making it suitable for home use without disturbing your daily activities.Included Vacuum Pump: Comes with a high-quality vacuum pump to facilitate the freeze drying process.Fully Automatic Process: Set it and forget it! Enjoy hassle-free operation with minimal supervision.Wi-Fi Monitoring: Control and monitor your freeze dryer remotely via our Android or iOS application. Dimensions Freeze dryer exterior dimensions: 550mm W x 800mm D x 770mm H.Perfect for counter top, cart, or table. Weight 70KG. Power Required power supply: 220V, 2,5 kW.Energy consumption: ~7,5.kWh/1kg/standard batch. Shipping Info Shipping dimensions: 90x80x105 cm.Gross Shipping weight: 117 kg.Maintenance Replace vacuum pump oil every 20 to 30 batches (takes about two minutes) Clean freeze dryer as needed. Warranty Min. 24 months, extendable warranty.

This listing is for a Heidolph Reax Top Vortex Mixer. The unit is in full working condition and is  (more)ready for immidate realese. The Heidolph Reax Top Vortex Mixer is the standard model for reliable and efficient mixing in laboratory environments. Engineered to deliver fast and dependable results, this vortex mixer is designed to handle a variety of sample types, including high-viscosity media and solids, ensuring a smooth and even dispersion. With its innovative mixing capabilities, the Reax Top is an excellent choice for researchers and technicians needing consistent and thorough mixing of samples in test tubes, Eppendorf tubes, and similar vessels. Key Features: High Vibration Orbit: The powerful 5 mm vibration orbit ensures optimal mixing performance, even with viscous samples or solids, achieving rapid and uniform dispersion. Continuous Mode: Switch to continuous mode for a permanent vibration motion, providing uninterrupted mixing when needed. Automatic Mode: The mixer operates in automatic mode, activating when a vessel is pressed against the plate and stopping once the pressure is released, allowing for hands-free operation. High Speed Mixing: Achieve fast mixing results with vibration frequency rates of up to 2,500 rpm, catering to a wide range of mixing applications. Analog Dial Speed Control: The simple analog dial allows for easy adjustment of mixing intensity without the need for specific RPM settings. Versatile Sample Handling: Comes standard with a plate for 20-mm diameter test tubes, and an optional test tube tray for flasks up to 50-mm diameter is available for added versatility in sample sizes. Specifications: Vibration Orbit: 5 mm Maximum Speed: Up to 2,500 rpm Operating Modes: Continuous and automatic Speed Control: Analog dial (no specific RPM settings)

This listing is for a Polar Refrigeration CDO80 Refrigerator. The unit is in full working condition (more) and is ready for immidate realese. Optimize your kitchen space with the Polar Refrigeration CDO80 Refrigerator, a compact and efficient cooling solution designed for professional kitchens. This stainless steel table-top refrigerator is perfect for establishments where space is limited but reliable refrigeration is essential. Key Features: Compact Design: Measuring 85.5(h) x 60(w) x 58.5(d) cm, the CDO80 fits seamlessly under worktops, ensuring easy access to your ingredients while maximizing your kitchen layout. Robust Storage Capacity: With a net capacity of 64 liters and equipped with 2 sturdy adjustable shelves plus 1 half shelf, this refrigerator allows for optimal organization and storage of your culinary essentials. Energy Efficiency: Rated with an energy class of A, the CDO80 features 40mm insulation for reduced energy consumption, translating to lower operating costs and a more eco-friendly kitchen. Technical Specifications: Temperature Range: Maintains a precise cooling environment between +2°C to +5°C, ideal for preserving freshness. Power Supply: Operates on 230V, with a power output of 120W and a daily energy consumption of 1.12 kWh. Weight: Weighs 44 kg, featuring fixed wheels for easy positioning and adjustable feet for stability. Benefits: User-Friendly Controls: The accurate digital temperature control and display ensure that your food items are stored at optimal temperatures, while the simple manual defrost program makes maintenance easy. Enhanced Security: The reversible door comes with a lock, providing added security for your valuable ingredients. Versatile Usage: Designed for medium use in ambient temperatures up to 30°C, making it suitable for various professional kitchen environments. The Polar Refrigeration CDO80 Refrigerator is your ideal companion for efficient food storage in a compact format. Elevate your kitchen's operational efficiency and ensure the freshness of your ingredients with this reliable refrigeration solution today!

This listing is for 1 of 2 Hanna HI 180 Speedsafe Magnetic Stirrer.The unit is in full working condi (more)tion and is ready for immidate realese.The Hanna HI 180 Speedsafe Magnetic Stirrer is an excellent choice for laboratories seeking a compact and efficient mixing solution. Here’s a detailed overview of its features and applications:Key Features:Compact and Lightweight Design: Its small footprint makes it perfect for laboratories with limited bench space.Attractive Color Options: Available in various colors, it allows easy identification of different samples, enhancing workflow efficiency.Electronic Speed Control: Users can easily regulate stirring speed through electronic controls, ensuring precise mixing.Speedsafe Mechanism: This safety feature limits the maximum stirring speed to 1000 rpm, even if the load is suddenly removed. This helps prevent accidents and ensures consistent performance.Durable ABS Housing: The stirrer's housing is constructed from ABS, making it resistant to most harmful chemicals typically found in laboratory environments.Maximum Stirring Capacity: Capable of stirring up to 1 liter, making it suitable for small-scale applications.Performance and Applications:The Hanna HI 180 Speedsafe Magnetic Stirrer is ideal for various light-duty laboratory stirring tasks, such as:Mixing Small Volumes of Liquids: Perfect for preparing solutions in microcentrifuge tubes or small beakers.Dissolving Solids in Solvents: Efficiently mixes solids into liquids, ensuring thorough dissolution.Preparing Samples for Analysis: Excellent for creating homogenous mixtures needed for accurate laboratory testing.

This listing is for a Kyosha KyoLine C029-k5 Printer.The unit is in full working condition and is re (more)ady for immidate realese.The Kyosha KyoLine Printer series consists of compact and portable thermal printers designed for mobile applications. They are widely recognized for their affordability, reliability, and the ability to provide bi-directional thermal printing, ensuring high efficiency and accuracy. These printers are suited for industries that require quick, on-the-go printing, such as logistics, retail, and healthcare.Key Features:Compact & Portable: The KyoLine series is designed for mobility, making it ideal for field operations or environments with limited space.Bi-directional Thermal Printing: The moving head thermal system ensures consistent, high-quality printing by enabling bi-directional print movement.Printing Speed: Prints at a steady rate of 1.4 lines per second, suitable for quick and efficient receipt or label printing.Quiet Operation: The thermal printing mechanism produces minimal noise, ideal for environments where quiet operation is required.Wireless Connectivity: Equipped with various connectivity options including:RS232 and TTL serial connections for wired integration.Bluetooth for seamless wireless operation, enhancing portability and ease of use.Customizable: Kyosha offers customization options to adapt the printers to specific customer needs, making them versatile for various industry applications.High-Grade Thermal Paper: Designed to work with high-grade thermal paper, ensuring clear and durable prints.

This listing is for a Watson Marlow 313S Peristaltic Pump.The unit is in full working condition and  (more)is ready for immidate realese.The Watson Marlow Peristaltic Pump Model 313S is a versatile and reliable solution for fluid transfer in various laboratory and industrial applications. Here are the key features and specifications:Key Features:Speed Ranges: The pump offers two selectable speed ranges:50 rpm400 rpmSpeed Control Ratio: Provides a 20:1 speed control ratio for precise adjustments, allowing for a wide range of flow rates.Operating Voltages and Frequencies: Compatible with a global power supply range of 110-240V and operates at 50/60Hz, making it suitable for use in different regions without the need for a voltage converter.Compact Dimensions: The pump has a compact size, measuring 285 x 167 x 120 mm (LxWxH), which helps save valuable bench space.Weight: Weighing 5.35 kg (12 lbs), it is lightweight enough for easy handling and placement in various settings.Power Rating: The pump operates at a power rating of 100 VA, ensuring efficient performance while maintaining low energy consumption.Applications:The Watson Marlow 313S peristaltic pump is suitable for various applications, including:Chemical and Pharmaceutical Processing: Ideal for transferring viscous and sensitive fluids without contamination.Laboratory Research: Commonly used in laboratories for applications requiring precise and controlled fluid transfer.Food and Beverage Industry: Useful for pumping food products or ingredients where hygiene and safety are critical.Water Treatment: Employed in processes requiring accurate dosing of chemicals and additives.

This listing is for a Lion Mark II Formaldemeter.The unit is in full working condition and is ready  (more)for immidate realese.The Lion Formaldemeter MK11 is a specialized instrument designed for measuring formaldehyde concentrations in various environments. This meter is essential for professionals in fields such as environmental monitoring, industrial hygiene, and health and safety compliance. Here are some key features and considerations regarding its use:Key Features:Service and Calibration: The Lion Formaldemeter MK11 can be serviced and calibrated at any general service facility that is equipped to handle PPM Formaldemeters and Glutaraldemeters. This ensures reliable performance and accurate readings over time.Phenol Filters: The device includes the option to fit phenol filters over the sampling nozzle. These filters are crucial for preventing saturation, thereby ensuring accurate and reliable readings. It is recommended to replace these filters approximately every 10 samples to maintain optimal performance.Cross-Sensitivity: Users should be aware that the Formaldemeter may exhibit cross-sensitivity to other volatile aldehydes and alcohols. This characteristic can potentially affect the accuracy of measurements, so it is important to consider the presence of these substances in the environment being tested.Calibration Warning: For accurate calibration, it is critical to avoid using interference gases. Calibration should always be performed under controlled conditions to ensure the integrity of the measurements.Applications:The Lion Formaldemeter MK11 is ideal for a variety of applications, including:Environmental monitoring in workplaces and laboratoriesAssessing formaldehyde levels in building materials and indoor air qualityCompliance testing for health and safety regulations

This listing is for a D3024R Refrigerated Micro-CentrifugeFeatures:User-friendly large LCD display p (more)rovides all visual informationQuiet and stable operation benefit lab environmentBrushless motor drives quickly and effortlessly accelerates the rotor to set speedFully autoclavable Bio-safe rotorDual door interlock design, more safeGently braking at low speed, better separationSpecifications:Max. Speed: 15000rpm (200-15000rpm), increment: 10rpmMax. RCF: 21380—g, increment: 10—gRotor: 1.5/2mlx24 (included), 0.2/0.5mlx36 (supplied separately), 5ml round bottom x18 (supplied separately), 5ml eppendorf x12 (supplied separately), PCR8x4 serial tubes (supplied separately)Run Time: 30sec~99min~HOLD (Continuous operation)Driving Motor: Brushless motorAdditional Features: Speed/Acceleration switch; Short-time run function; sound-alert functionSafety Devices: Dual door interlock, Over-speed detector, Over-temperature detectorAutomatic internal diagnosisTemperature Range (D3024R): -20 °C to +40 °C

This listing is for 1 of 2 Watson Marlow 505S Peristaltic Pump. The unit is in full working conditi (more)on and is ready for immidate realese. Experience precision and reliability with the Watson Marlow 505S Peristaltic Pump, expertly designed for the safe transport of liquids while maintaining a contamination-free environment. Ideal for delivering culture media, buffers, and various solutions, this versatile pump is a valuable addition to any laboratory. Key Features: Variable Rotor Speed: With a rotor speed range of 2-220 rpm, the 505S allows for customizable flow rates to suit your specific application needs. Compact Design: Measuring just 25 x 30 x 12 cm, this pump's compact size makes it perfect for laboratory settings where space is at a premium. Flexible Electric Supply: Compatible with both 100-120V and 220-240V power sources at 50/60Hz, ensuring versatility in different laboratory environments. Technical Specifications: Manufacturer: Watson Marlow Benefits: Contamination-Free Operation: The peristaltic design ensures the liquid only comes into contact with the tubing, protecting both your samples and the pump from contamination. Versatile Applications: Whether you're working with culture media, buffers, or other solutions, the 505S is designed to handle a wide range of laboratory tasks efficiently. Accessory Options: Enhance your pump's capabilities with various pumphead options, such as the 508MC2 Eight Roller Two Channel Micro Pumphead and the Easy Load Drive Head, allowing for even greater adaptability. Choose the Watson Marlow 505S Peristaltic Pump for a dependable, high-performance solution that meets the demands of your laboratory. Achieve consistent results and streamline your liquid handling processes with this exceptional peristaltic pump.

This listing is for a Heidolph Polymax 1040 Wave Platform Shaker. The unit is in full working condi (more)tion and is ready for immidate realese. Elevate your laboratory's capabilities with the Heidolph Polymax 1040 Wave Platform Shaker, a versatile and reliable solution designed for a wide range of applications, including cell culture, mixing, and incubation. This medium-sized shaker is engineered to provide optimal performance while ensuring gentle and effective agitation for your samples. Key Features: Variable Tilt Angles: Choose between a 5° tilt angle for soft, gentle movements or a 10° tilt angle for more vigorous shaking, accommodating various vessel types such as culture plates, media bottles, and Erlenmeyer flasks. Adjustable Speed Control: Easily set and adjust the speed from 2 to 50 rpm using the intuitive analog control knob, making it ideal for delicate cell culture applications. Temperature Control Compatibility: Designed to work seamlessly with a modular incubator system, the Polymax 1040 supports variable temperature control up to 65 °C, allowing for precise incubation conditions. Technical Specifications: Maximum Load Capacity: 5 kg Shaking Type: Orbital rocking shaker Analog Timer: Set for unattended operation from 1 to 120 minutes, with an acoustic alarm signaling when the time is up. Benefits: Unmatched Versatility: The Polymax 1040 can handle a variety of vessels, giving you the flexibility to conduct multiple experiments without limitations. User-Friendly Operation: The straightforward analog controls and timer make it easy to set up and monitor your experiments, ensuring reliable results every time. Robust Design: With a shipping weight of 10 kg and a durable construction, this shaker is built to withstand the demands of everyday laboratory use. Choose the Heidolph Polymax 1040 Wave Platform Shaker for a dependable, high-performance shaking solution that meets the diverse needs of your laboratory. Experience enhanced efficiency and precision in your mixing and incubation processes today!

This listing is for a Velp Scientific ZX3 Advanced Vortex Mixer.  Variable speed operation, electron (more)ically controlled up to 3000 rpmAutomatic start in touch mode or continuous operationUniversal voltage / frequency modelAccessories fit by simple pressureOptimum resistance to chemicals from technopolymer casingExcellent stability with zinc alloy baseLarge, anti-slip rubber feet for staying in required positionIP 42 protection against particles and liquids

This listing is for a Fisher Digital Multi-tube Vortexer Mixer Shaker. The unit is in full working  (more)condition and is ready for immidate realese. The Fisher Dig Multi-tube Vortexer Mixer Shaker is a cutting-edge digital vortex mixer designed for the secure and efficient mixing of up to 50 samples simultaneously. Ideal for laboratories that require high-throughput and versatility, this shaker features advanced programmable functions, making it suitable for a wide range of applications. Key Features: Digital Control: The intuitive digital interface allows for precise control over mixing settings, ensuring consistent results. Programmable Pulse Mode: Tailored for handling difficult samples, the programmable pulse mode provides customizable mixing options to meet diverse laboratory needs. High Capacity: Securely holds up to 50 samples at once, significantly increasing throughput and efficiency during sample preparation. International Compatibility: Comes with EU, UK, and CH plugs for seamless operation in various regions at 230V. Versatile Accessory Compatibility: Designed to be compatible with Fisherbrand vortex mixers, providing added flexibility for lab setups. Specifications: Voltage: 230V Sample Capacity: Up to 50 samples

This listing is for a CS Cleaver Scientific S0100A-CLE-230V Vortex Mixer. The unit is in full worki (more)ng condition and is ready for immidate realese. This Cleaver Scientific variable speed Vortex Mixer combines fast, efficient mixing with minimal vibration. Unlike other vortex mixers using elliptical orbits, the true circular orbit of the CSLVORTEX facilitates uniform sample-vortexing even at low speed. The CombiHead head, which is supplied as standard, accepts many different tube sizes, while the unique overmoulding technology used in its manufacture provides a sturdy plastic core with non-slip TPE that fits optional heads for microplates, microtubes, PCR strip tubes, 15ml and 50ml tubes and blood vials. CSLVORTEX may be used in touch or continuous mode, being activated by simply depressing the sample head and then stopped by releasing the pressure. An optimised counter balance system within the CSLVORTEX minimises vibration and movement of the unit during operation, whereas its lightweight construction and small footprint allow it to be readily transported and used in areas where space is restricted.

This listing is for a Grant BFR25 Platform Shaker. The unit is in full working condition and is rea (more)dy for immidate realese. The Grant BFR25 Platform Shaker is a highly efficient and reliable laboratory instrument designed for mixing, shaking, and stirring applications. Engineered for precision and durability, this shaker is ideal for a wide range of laboratory processes, including cell culture, biochemical assays, and general laboratory mixing. With its intuitive controls and robust design, the BFR25 is the perfect choice for laboratories looking to enhance their mixing capabilities. Key Features: Versatile Shaking Modes: The BFR25 offers both orbital and linear shaking modes, allowing for tailored mixing according to the specific requirements of your samples. Adjustable Speed and Time Settings: Users can easily adjust the shaking speed (30 to 300 RPM) and set time intervals (up to 99 hours and 59 minutes), providing flexibility for various applications. High Load Capacity: With a maximum load capacity of 3 kg, this platform shaker can accommodate a variety of sample sizes, making it suitable for both small and large batches. User-Friendly Digital Control Panel: The easy-to-read LED display allows for straightforward operation and monitoring of speed and time settings. Robust Platform: The large platform (350 x 350 mm) features a non-slip rubber mat to securely hold flasks, beakers, and other lab vessels during operation. Quiet Operation: Designed with a low-noise motor, the BFR25 ensures a quiet working environment, making it ideal for use in noise-sensitive laboratories. Compact Design: The space-saving design fits easily on laboratory benches, optimizing workspace while delivering powerful performance. Specifications: Model: Grant BFR25 Shaking Type: Orbital and Linear Speed Range: 30 - 300 RPM Time Setting: Up to 99 hours and 59 minutes Maximum Load Capacity: 3 kg Platform Dimensions: 350 mm x 350 mm Power Supply: 230V, 50Hz Dimensions (W x D x H): 440 mm x 440 mm x 160 mm Weight: 11 kg Safety Features: Overload protection and non-slip mat

This listing is for a ENVAIR Safe Comfort Plus Safety Cabinet

This listing is for a Grant Instruments PV-1 Vortex MixerIdeally sized for personal use, the Grant-b (more)io PV-1 vortex mixer is compact, with a low profile and small footprint, to sit in almost any location. The PV-1 is so small that it will fit in your hand – yet there is no compromise on performance. The reliable motor produces regulated and reproducible agitation throughout the speed range. It is also extremely quiet. With variable speed from 750 to 3000 rpm, the PV-1 can be used for gentle through to vigorous mixing and pellet resuspension in 0.5mL, 1.5mL, and 15mL tubes.Adjustable speed control: 750 to 3000 rpm‘Continuous’ or ‘touch’ operationFor tubes up to 20 mm diameterPressure sensitive cup accommodates tubes up to 20mm diameterReliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed rangeExtremely easy to operate – select either ‘continuous’ or ‘touch’ operation and turn the knob to adjust the speed from 750 rpm to 3000 rpmIn ‘touch’ mode, agitation starts in response to pressure on the pressure sensitive cup.Exceptionally compact with a low profile and small footprint – fits into almost any locationRubber suction pads hold tight to the work surface and prevent the unit from ‘walking’ – they also absorb vibration and prevent its transmission to the workbench

This listing is for a Grifols DG Therm IncubatorThe DG Therm is a digital incubator designed for eff (more)icient gel card processing. It can hold up to 24 DG Gel cards and 24 test tubes across two independent incubation zones. The on-screen display shows the remaining incubation time and temperature, and it features a programmable alarm and removable trash bin.

This listing is for a Scilog Tandem 1081 Peristaltic Pump. The unit is in full working condition an (more)d is ready for immidate realese.

This listing is for a Brand New Harvest Right Medium Home PRO Freeze Dryer sold through ULMfreezedry (more)ers.comWe are stock holders in UKPrice before VAT - £4000A home freeze dryer from Harvest Right allows you to preserve the food your family loves to eat. Freeze drying locks in both flavour and nutrition and can last for years, making freeze-dried food even better than fresh! A home freeze dryer is perfect for any lifestyle. What’s Included Medium Freeze DryerPremier Industrial Vacuum Pump (Approx £1200 value)Vacuum Pump OilOil FilterStainless Steel Trays (set of 5)Guide to Freeze DryingMylar Bags (50 ct)Oxygen Absorbers (50 ct)Impulse Sealer  Features Tray space: 675 square inchesFreeze dry 4.5 to 5.8KG fresh food per batchFreeze dry up to 1360KG fresh food per year (This would require a person to use the freeze dryer 4 times a week for 50 weeks a year)  Dimensions Freeze dryer exterior dimensions: 482.6mm W x 635mm D x 736.6mm HPerfect for counter top, cart, or table. Weight of freeze dryer: 53.9KG Premier industrial vacuum pump included/no extra cost (Approx £1200 value) Power Standard UK 230v Shipping Info The medium freeze dryer ships in one package with a total weight of 160KGItem will be delivered in international shipping crate (must be purchased from Harvest Right when exporting machines out of USA)One freeze dryer in fully encased shipping crate: 920 x 770 x 1500H If you would like to collect from site, we would be able to cut down the crate to fit in smaller vans: 920 x 770 x 1050H + extra box of parts Maintenance Replace vacuum pump oil every 20 to 30 batches (takes about two minutes) Clean freeze dryer as needed. Warranty 1 Year international warranty provided by Harvest Right.

This listing is for a Monmouth Guardian MSC T1200 Class 2 Biological Safety Cabinet. The unit is in (more) full working condition and is ready for immidate realese. The Monmouth Guardian MSC T1200 is a Class 2 Biological Safety Cabinet designed for microbiology and biotechnology applications. Here are some key features and specifications: Dimensions: Working Chamber: 741(h) x 1107(w) x 510(d)mm, Overall External: 1321(h) x 1200(w) x 750(d)mm Air Cleanliness: ISO Class 4 | H14 HEPA Filter – 99.97% efficient at 0.3um Motorised Sliding Sash: Allows for easy access and manipulation of samples UV Light: Included for additional disinfection and decontamination Power Consumption: 0.15kW Noise Level: 64dB when running

This listing is for a Fisons SGP WhirliMixer Vortex Mixer. The unit is in full working condition an (more)d is ready for immidate realese. The Fisons SGP WhirliMixer® Vortex Mixer is designed for rapid, efficient, and repeatable mixing in laboratories, offering a far superior alternative to hand shaking. Its innovative design creates a powerful vortex in the tube, ensuring highly effective and consistent mixing action across multiple samples. This not only eliminates contamination risks associated with stirring rods and stoppers but also enhances the repeatability of results. Equipped with automatic press-start operation, the mixer activates instantly when a tube is pressed into the rubber cup, making it ideal for repetitive tasks. The variable speed control allows precise adjustments, providing controlled mixing at a wide range of speeds, from gentle agitation to fast vortexing. This feature is especially beneficial in applications where the integrity of delicate cell structures needs to be preserved. The mixer can be set to operate continuously or on demand, depending on the needs of the application. Additionally, the skirted rubber cup design helps prevent spills from entering the mixer’s casing, ensuring durability and ease of maintenance. Key Features: Efficient Vortex Mixing: Creates a vortex for thorough mixing, reducing manual effort and improving sample consistency. Automatic Press-Start Operation: Activates instantly when a tube is pressed into the rubber cup, perfect for repetitive mixing tasks. Variable Speed Control: Offers controlled mixing across a wide speed range, allowing for both gentle and vigorous mixing. Continuous or On-Demand Operation: Can be set for continuous use or activated by pressing the tube into the cup. Skirted Rubber Cup: Prevents liquids from entering the casing, ensuring long-lasting performance and easy cleaning.

This listing is for a Grant QBD1 Digital Dry Block Heater. The unit is in full working condition an (more)d is ready for immidate realese. Discover the precision and efficiency of the Grant QBD1 Digital Dry Block Heater, designed to meet the rigorous demands of modern laboratories. This high-precision heating system offers exceptional temperature control, making it ideal for a variety of applications, including enzyme digestions, nucleic acid hybridizations, and general laboratory tasks. Key Features: Wide Temperature Range: Operates from ambient +5°C to 130°C, providing versatility for various heating needs. Single Block Position: Equipped with one removable and interchangeable block, allowing for easy customization based on your specific requirements. Digital Temperature Control: Enjoy precise temperature management with stability and uniformity of ±0.1°C, ensuring reliable results every time. Rapid Heat-Up Time: Quickly reaches your desired temperature, enhancing workflow efficiency in busy lab environments. Integral Timer Function: Optional external probe capability allows for accurate in-sample or in-block temperature monitoring. Technical Specifications: Dimensions: 200 x 240 x 120 mm (w x d x h) Robust and Compact Design: Features a contemporary design and includes a block extraction tool for safe and easy block removal. Benefits: High Precision: Achieve consistent and accurate heating for sensitive experiments. User-Friendly: The intuitive design ensures ease of use, making it suitable for both experienced and novice lab personnel. Durable Construction: Built to withstand the demands of daily laboratory use, ensuring long-lasting performance. Elevate your laboratory's capabilities with the Grant QBD1 Digital Dry Block Heater. Experience unmatched precision and reliability, making it an essential tool for any scientific setting.