COMBISTORAGE 2 CS260 CHEMISAFE

Cabinet for the storage and isolation of poisons, toxic chemicals and CMRs. Made entirely of FE P01  (more)electro-galvanized sheet steel (Skin passat), thickness 10/10 mm, cold press bent and painted, after degreasing treatment, with a first application of epoxy primer and with 2 subsequent applications of thermosetting powders and subsequent passage in a thermal tunnel at 200°C. - 2 plastic-coated steel shelves (max load 5 kg evenly distributed) - Double layered swing door, lock and key - Opening of the doors with an angle greater than 110° which allows the extraction of the shelves without having to tilt them - Predisposition for wall mounting - Possibility of fixing in a safety cabinet (on the shelf or on the back wall of the cabinet) - Locking with safety lock and key - Can be used as a wall unit to store harmful products or inside a 1- or 2-door wardrobe - Safety symbols indicating the presence of poisons inside

Medium-duty workbench 200 x 100 cm The multi-service work table / bench is particularly practical, i (more)t is ideal for packaging stations equipped with kraft paper, bubble wrap, plastic sheath and paper dispensers. It is also used for order preparation, sorting or workshop. Its legs are blue RAL 5010 and the worktop is made of melamine with a thickness of 18 mm. Worktop color: gray Dimensions of the laminated wood top: 200 x 100cm Top height: 84cm Slightly damaged wooden top

CABINET CS 120 BASIC PLUS - CHEMISAFE - Completely made of 10/10 mm thick electrogalvanized steel sh (more)eet, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - One piece construction with adjustable leveling feet - Possibility of having 1, 2, 3 or 4 compartments to store the different families of non-flammable chemicals separately - Simple hinged or double layer doors - Lock and key - Door opening at an angle of 110° which allows the shelves to be pulled out without tilting them - Equipped with fixed or sliding retention shelves in plasticized/painted/stainless steel, with adjustable height - Possibility of having a retention tray on the bottom of the cabinet (see table alongside) - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards - Compliance with EN61010-1 standards; EN16121 and CEI 66-5 Supplied: - 3 shelves in plasticized steel (max load 80 Kg evenly distributed) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

Lifting platform Rudolf Grauer Boy 110. Aluminum and stainless steel. Load max. 50 kg Size of platfo (more)rm-12x14 cm Lift style scissor. Control of manual adjustment. Specifications: Height of extension: 14 cm Height folded: 4 cm Ideal for use in fume-hoods fume, the media lab are lifting platforms ultra-stable able to hold a variety of items such as glassware, hot plates, baths and magnetic stirrers. The button adjustment allows height adjustment easy and precise. Constructed of aluminum and stainless steel and with a top plate 12x14 cm, With its system of lift-style scissor, this cat in the laboratory is able to withstand loads of up to approximately 50 kg It is recommended that the cat be lifted as close to the desired height as possible, before the weight is put on it and make final adjustments.

Agilent 1100 UV / Vis Detector (VWD - G1314A). 190-600 nm wavelength range. Greater limits of detect (more)ion with simplified optics for high sensitivity, low deviation from the base line and wide linear range. Use a deuterium lamp as a source of light and a double beam photometer for the detection system. It can be used independently to add as a module to an HPLC. The HP Agilent 1100 Series G1314A Variable Wavelength Detector (VWD) offers high sensitivity while improving productivity. This tool has a wide linear range for the reliable simultaneous quantification of impurities and major and minor products. Programmable wavelength switching for optimized sensitivity and selectivity for the elution of each analyte. Minimum baseline noise with the highest baseline stability for the lowest detection limits. Specs:       Wavelength range: 190-600 nm       Wavelength accuracy: +/- 1 nm       Bandwidth: 6.5 nm       Double beam photometer with deuterium lamp       Linearity:> 2 AU (5%) upper limit       Drift: 3 × 10-4 AU / h at 254 nm       Analog output connection

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

Ohaus i-DF33P5000B1L Defender 3000 Floor Scale, 5000 lb., 1 lb. Maximum Capacity 5000 lb. (2,500 kg) (more) Readability 1 lb. (0.5 kg) Platform Size 4 x 4 ft. (1,219 x 1,219 mm) Features - Weighing, Checkweighing, Counting, Totalization - 7 Segment LCD with multicolor backlight - Standard RS232 and optional USB Device or Ethernet - ABS plastic or 304 stainless steel indicator, 5 mm/0.196 in. fixed top plate, black painted steel treaded platform, IP65 stainless steel junction box with side access, alloy steel load cells, two carbon steel eye bolts, painted steel ramp available - Four load cell mounted feet with self-swiveling ball-in-cup design, painted and stainless steel floor stands (available as accessories) The Ohaus Defender 3000 Floor Scales meet dry weighing needs in industrial and commercial use. Their high-quality construction is designed to minimize flexing under heavy loads for years of dependable performance. The indicator features a bright display that can change color when in check mode. Scale also includes counting and totalization modes. Stainless steel bases include IP68 loadcells for wet areas. Ramps and mounting plates are available. INCLUDED: The Ohaus i-DF33P5000B1L Defender 3000 Floor Scale, 5000 lb., 1 lb. includes: - 2 x Eyebolts - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris myGel Mini Electrophoresis System The myGel mini gel box attaches directly to the power supp (more)ly for a secure connection everytime. Selectable parameters include 3 preset voltages – 35V, 50V or 100V – and a 99 minute timer. All are set using the memberane keypad. The safety lid is vented to help dissipate heat generated during electrophoresis, and features a viewing area above the gel. Current will only run through the system when the lid is properly in place on top of the gel box. Trays and casting stands for both 10.5 x 6cm and 5 x 6cm gels are included with the myGel Mini system, as are double-sided combs. The smaller tooth combs are compatible with multichannel pipettes. Casting is quick and easy – just place the tray in the casting stand and pour. The trays feature a dark contrast strip to help visualize wells while loading and lines that fluoresce under UV and blue light to track progress of the run.INCLUDED: The Accuris myGel Mini Electrophoresis System includes: - Gel Tank - Power Supply - Two Casting Sets for 10.5 x 6cm and 5 x 6cm - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW