Fume hoods and lab enclosures

Cabinet for the storage and isolation of poisons, toxic chemicals and CMRs. Made entirely of FE P01  (more)electro-galvanized sheet steel (Skin passat), thickness 10/10 mm, cold press bent and painted, after degreasing treatment, with a first application of epoxy primer and with 2 subsequent applications of thermosetting powders and subsequent passage in a thermal tunnel at 200°C. - 2 plastic-coated steel shelves (max load 5 kg evenly distributed) - Double layered swing door, lock and key - Opening of the doors with an angle greater than 110° which allows the extraction of the shelves without having to tilt them - Predisposition for wall mounting - Possibility of fixing in a safety cabinet (on the shelf or on the back wall of the cabinet) - Locking with safety lock and key - Can be used as a wall unit to store harmful products or inside a 1- or 2-door wardrobe - Safety symbols indicating the presence of poisons inside

YOUR NEW FAVORITE HOT PLATE New design, new control panel and robust, perfectly sealed construction  (more)make RC 5 the future best seller of Velp Scientifica. RESISTANCE, SAFETY AND PERFORMANCE The plate of the RC 5 Velp model is IP42 certified and is made of aluminum alloy, with a diameter of 135 mm, which guarantees a homogeneous temperature and optimal heat transfer over the entire surface. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, an indicator light remains on until the plate temperature drops below 50°C. RC 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. APPLICATIONS RC 5 is the ideal solution for routine laboratory applications, such as boiling liquids, preparing solutions, dissolving buffers and reagents.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hersteller: Binder Modell: KBF 720 E5.2 Technische Daten: Temp MAX: 70 °C Temp MIN: 0 °C Volumen: 70 (more)0 l steril: Nein Breite: 890 mm Breite/innen: 576 mm Höhe: 1925 mm Höhe innen: 1250.0 mm Länge: 1250 mm Tiefe: 1250 mm Tiefe innen: 973 mm Anzahl Fachböden/ Gitter: 2 Bedienung über Touchscreen Gewicht: 309 kg Länge innen: 973 mm Spannung: 230 V Typ Schnittstelle: USB|Ethernet Heizgeräte und Wärmeschränke Eigenschaften: mit Überhitzungsschutz|mit stufenloser Temperaturregelung|mit innenliegender Glastür|mit Zertifizierung|mit Timer|mit Schnittstelle|mit Kühlung|mit Datenlogger Leistung: 3100 W Art der Konvektion: Natürlich Temp.-Genauigkeit: +/- 0.2 °C Typ Inkubator/ Brutschrank: ohne CO2-Zufuhr Feuchtebereich: 10 % r.F. bis 80 % r.F. Material Innen: Edelstahl Seite Türaufhängung: rechts|links Stellvarianten: alleinstehend Typ Temperierschrank: Konstantklimaschrank

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hersteller: Testo Modell: testostor 171-3 Interner Feuchte-/Temperatursensor mit Langzeit-DATALOGGER (more) S/N: 90874770083 Beschreibung: Der testostor 171-3 ist ein kompaktes Messdaten-Speichergerät mit internem Feuchte-/Temperaturfühler zum schnellen Platzieren direkt am Messort.Die gespeicherten Daten können mit dem Testo-Protokolldrucker vor Ort protokolliert oder mittels Interface (Schnittstelle) und der Software auf dem PC ausgewertet werden. Kernmerkmale: • Aufsteckbare Anzeige, Messwerte vor Ort kontrollieren• Kontroll- und Abgleichmöglichkeit durch Abgleichset• Messrate: 2 sec bis 24 h frei wählbar• Einfacher Batteriewechsel• DKD-Kalibrierung möglich• Sinterkappenschutz für staubhaltige Umgebung (siehe Zubehör)• Geeignet für den Außenbereich• Schutzklasse IP65• Datenauswertung auf PC Spezifikationen NTC Fühler: Fühlertyp:   NTC Messbereich:  -10 ... +50 °C Genauigkeit:   ±0.5 °C (-10 ... +39.9 °C) // ±0.6 °C (+40 ... +50 °C) Auflösung:   0.1 °CBetriebstemp.:   -20 ... +70 °CLagertemp.:   -40 ... +85 °CSpeicher:    20000 Gehäusematerial:  Aluminium, eloxiertBatterietyp:   Lithium-Batterie (neue Batterie eingesetzt)Abmessung:   131 x 68 x 84 mmGewicht:    320 g Spezifikationen Feuchtesensor kapazitiv: Messbereich:  0 ... +100 %rFGenauigkeit:   ±3 %rF (+2 ... +98 %rF)Auflösung:   0.1 %rF Schutzklasse:  IP65 Messrate:    2 sec bis 24 h frei wählbarBatteriestandzeit:  bis zu 5 JahrenSoftware:    Menügeführt ab Microsoft Windows 95 / NT 4 Servicepack 4 Lieferumfang: - Testo Testostor 171-3 Feuchte-/Temperatursensor DATALOGGER- Wandbefestigungsmagnet- Auswertestation inkl. Verbindungskabel für PC Anschluss- Software zur Auswertung der Loggerdaten mit graphischer Darstellung am PC- Bedienungsanleitung komplett- Aufbewahrungskoffer Das Temperaturmessgerät befindet sich in einem guten Zustand und ist 100% auf Funktion geprüft.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a ENVAIR Safe Comfort Plus Safety Cabinet

This listing is for a Monmouth Guardian MSC T1200 Class 2 Biological Safety Cabinet. The unit is in (more) full working condition and is ready for immidate realese. The Monmouth Guardian MSC T1200 is a Class 2 Biological Safety Cabinet designed for microbiology and biotechnology applications. Here are some key features and specifications: Dimensions: Working Chamber: 741(h) x 1107(w) x 510(d)mm, Overall External: 1321(h) x 1200(w) x 750(d)mm Air Cleanliness: ISO Class 4 | H14 HEPA Filter – 99.97% efficient at 0.3um Motorised Sliding Sash: Allows for easy access and manipulation of samples UV Light: Included for additional disinfection and decontamination Power Consumption: 0.15kW Noise Level: 64dB when running

This listing is for a Envair Safety Cabinet

This listing is for a Erlab Captair Flex M321 Fume Cabinet. The unit is in full working condition a (more)nd is ready for immidate realese. Ensure the safety of your laboratory personnel with the Erlab Captair Flex M321 Fume Cabinet, a cutting-edge ductless fume hood designed to protect against hazardous chemical exposure. Engineered with Erlab’s advanced filtration technology, this fume cabinet is perfect for laboratories requiring high-efficiency filtration without the need for ductwork. Key Features: Modular Filtration Column: The Captair Flex M321 features a unique modular filtration system that combines HEPA or ULPA filters with high-performance activated carbon molecular filters, delivering unparalleled filtration quality for various chemical hazards. Smart Technology: Equipped with real-time monitoring capabilities, the fume cabinet provides notifications regarding hood operation and filter status, ensuring optimal performance and safety. Safety Standards Compliance: Meets AFNOR NFX 15 211/ANSI Z9.5-2012 filtration efficiency standards (class 1 and 2), guaranteeing reliable protection against solvents, acids, and formaldehyde. Technical Specifications: External Dimensions: 30”W x 24 3/8”D x 43 ¾” (min) to 50 5/8” (max)H Air Face Velocity: Adjustable between 0.4 to 0.6 m/s (79 fpm to 118 fpm) Filter Breakthrough Detection: Sensors monitor filter saturation, with a backup filter for added safety. Benefits: Flexible Placement: The ductless design eliminates the need for complex ductwork, allowing for easy installation and relocation within your laboratory. Enhanced Safety: Advanced filtration technology ensures superior protection for laboratory personnel, reducing the risk of inhalation exposure to harmful chemicals. Customizable Options: Tailor the filtration system to meet specific laboratory needs, ensuring optimal safety and efficiency for various applications. The Erlab Captair Flex M321 Fume Cabinet is your ideal solution for a safe and efficient laboratory environment. Experience the perfect combination of advanced technology, flexibility, and superior protection today!

Multi-risk cabinet 120 liters sliding door A1T TRIONYX Safety cabinet for chemical products With 4 r (more)etention tanks With a key Type: Drawer door Number of doors: 1 Width (cm): 56 cm Depth (cm): 50 cm Height (cm): 182.5 cm Maximum load (kg): 120 kg Material: STEEL Color: WHITE RAL: 9010 With some traces of rust

DÜPERTHAL safety cabinet Basic UTS BS-5 New equipment (never used) Basic UTS BS-5 Model : 23-060654- (more)401 1 drawer interior fittings, sheet steel Interior dimensions: 45 x 42 x 35 cm (L x D x H) External dimensions: 60 x 50 x 64 cm (L x D x H)

MEMMERT ICH750eco climatic chamber - 750 litres ICH model: Incubator / drying oven with humidity con (more)trol Tested at 35°C / 65% humidity Year of manufacture: 2019 Non-refrigerated chamber (non-functional refrigeration unit) Temperature range: Ambient temperature + 10°C to 60°C Temperature delta, regulation: ± 2°C Adjustable useful humidity (% rh): 10 to 80 Volume: 749 litres Case: stainless steel exterior and interior Double glazed interior doors Intuitive, touch control interface and programmable settings 40 mm diameter access port at the rear as standard Models on casters Operation: with distilled water Supplied with 2 stainless steel grids and water tank External dimensions L x D x H (mm): 1224 x 834 x 1950 Internal dimensions L x D x H (mm): 1040 x 600 x 1200 Weight: 249 kg Power: 1350W Capacity Maximum load per tray (kg): 30 Maximum load per device (kg): 200 Equipment tested at: 35°C - 70% humidity 50°C - 50% humidity Test possible with your values ​​on request

PSM / ESCO AIRSTREAM PLUS (AC2-5E8-TU) 1.5m microbiological safety cabinet New equipment in its orig (more)inal packaging Complete pack including: PSM ESCO Airstrem plus class II AC2-5E8-TU length 150cm (1.5m) A UV-30A UV lamp A fixed support with leveling feet Height: 71cm SAL-5A0 GEN2 2 internal sockets TüV NORD EN 12469 certified model Automatic regulation and malfunction alarm and dry contact for alarm report Dual economical motors ensuring permanent and stable flow control Removable stainless steel worktop, with a large work surface and inclined underplane for liquid retention LED lighting Control panel with clear flow display, window position Silent operation The PSMs are equipped with 2 electrical sockets and a UV lamp Depth without armrests: 767 mm / with armrest: 823 mm Motorized front window, stops at the working position External stainless steel armrest on the entire front part Nominal size: 1.5 m External dimensions: 1645 x 767 x 1400 mm (L x D* x H) Internal dimensions: 1525 x 580 x 654 mm (L x D x H) External depth without / with armrest: 767 / 823 mm Weight: 293 kg Model: AC2-5E8-TU Gross weight: 309 kg Gross dimensions: 172 x 90 x 174 cm The sheet metal slide covers are slightly deformed at the bottom, but this does not hinder the proper operation of the PSM or the opening and closing of the window Year of manufacture: 2016

COMBISTORAGE 4 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Completely made of electroga (more)lvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Made in two or three compartments with smooth painted or glass doors - Cabinet body in galvanized steel Characteristics of the ACID COMPARTMENT: - Completely made of electrogalvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Features of the BASE COMPARTMENT: - Two retention shelves made of stainless steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Characteristics of the COMPARTMENT FOR "TOXIC SUBSTANCES": - Two retention shelves made of painted steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Supplied: - Acids: 2 shelves in plasticized steel - Bases: 2 shelves in stainless steel - Toxic substances: 2 shelves in painted steel - Flammable: 3 shelves and 1 retention tank with painted steel grid (max load of 60 Kg evenly distributed) Optional: - Shelves - Trays - Timer - Visual and acoustic alarm system - Ventilation - Molecular aspirator - Activated carbon filter

CABINET CS 60 - CHEMISAFE - Made entirely of electro-galvanized steel sheet (Skin passat) FE P01, th (more)ickness 10/10 mm, cold pressed and painted, after degreasing treatment, with a first application of epoxy primer and with 2 subsequent applications of thermosetting powders and subsequent passage in a thermal tunnel at 200°C - “Monolithic” type constructions with feet at the base for leveling the cabinets - Double-paneled and reversible doors made of the same materials, complete with handles with safety locks and locks - CE marked electric fan with self-extinguishing, antistatic technopolymer case resistant to corrosive agents - Protection fuses: 5x20 mm, fast flow 1A - Aspirator flow rate: max 275 m3/h - Activated charcoal filter (optional) mounted on top, suitable for acid substances, with prefilter. Easy replacement of the filter behind a hinged panel with key lock - Handles with lock and key - Tray-shaped steel shelves with a thickness of 10/10 mm for the eventual containment of liquids in case of breakage or spread from the containers. Height adjustable - 110° opening that allows the shelves to be extracted without having to tilt them - Multilingual safety signs indicate the presence of dangerous and toxic products to highlight the contents and storage limits - Standardized pictograms according to ISO 3864 standards - Closure with safety lock and key - Compliant with EN61010-1 standards; EN16121 and CEI 66-5 Supplied: - 3 plasticized shelves (max load 40 Kg evenly distributed) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

COMBISTORAGE 60 FIRE TYPE 90 CERTIFIED SAFETY CABINET - CHEMISAFE General features: - Completely mad (more)e of 1 -1.5 mm thick galvanized steel sheet, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the room temperature exceeds 50 °C - 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with fire dampers which close the ducts when the temperature is higher than 70 °C according to DIN 4102-6 - Preparation for ventilation through a Ø 100 mm flange for an external connection or a filtration ventilation system (see chapter on ventilation) - Closing and locking system that allows to keep the cabinet doors open and to close them automatically in case of ambient temperature above 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Grounded - Adjustable leveling feet - Lock and key - Height-adjustable shelves in painted or stainless steel - Shelf fixed with aluminum pins, excluding all risks of sparks - Fire resistant shelves - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470 and EN16121 standards - DOOR OPENING TO THE LEFT, opening with door to the right on request INTERNAL COMPARTMENTS for the storage of various families of chemicals: - Separation by means of 18 mm thick HPL panels covered with thermo-expanding gaskets (possibility of having up to 3 compartments and customization compartments - do not hesitate to contact us) Supplied: - COMPARTMENT FOR FLAMMABLES: 1 painted steel shelf + 1 retention tank with grid - ACID/BASE COMPARTMENT: 3 plastic-coated steel shelves (max load 60 Kg evenly distributed) Optional: - Shelves - Visual and acoustic alarm - Timer - Fire extinguisher - Electric aspirator - Activated carbon filter - Molecular suction system

CABINET CSB60 - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm thic (more)k electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards Supplied: - 3 plasticized steel shelves (max load 40 Kg distributed evenly) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE B B (more)eing able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door