General laboratory equipment

Flow rate: 0.1 to 50 mL/min Maximum operating pressure: 1 MPa Tubing ID (flow path): 0.75 mm Single  (more)wavelength detection: Mercury lamp and 254 and 280 nm filters included Flow path length: 2 mm Buffer selection: 2 inlets pH stability long term: 2 to 12 Viscosity: Max 10 cP (<10mL/min), max 5 cP (>10mL/min) Dimensions (WxHxD): 400 x 530 x 250 mm

The Buchi R-205 rotavapor is designed for applications associated with solvent evaporation. This rot (more)avapor is extremely suitable for, among other things, the distillation of solvents, for the evaporation of solvents and suspensions and for the (re)crystallization of liquids in the rotating evaporation flask. The distillations can be carried out under vacuum and atmospheric pressure. This increases performance and helps protect products. Speed: 0-250 rpm External dimensions (WxDxH): 450 x 360 x 1000 mm Pressure: 0 – 1400 mbar Temperature range: 20ºC to 180ºC

Temperature range: +20 to 100°C Temperature stability: ±0.03°C Temperature display resolution settin (more)g: 0.1°C Temperature display resolution: 0.01 – 0.1°C Minimum filling height below the top of the bath: 45 mm Minimum depth bath tank: 150 mm Dimensions (WxDxH): 132 x 160 x 362 mm Weight: 1.9kg

The RV 10 digital represents the continual enhancement of the IKA RV 10 rotary evaporator line. The  (more)unit comes with an universal heating bath, vertical glassware, state-of-the-art safety features and digital connectivity. The RV 10 digital is a robust and reliable lab companion. Its optimized bath volume allows for fast heat-up times. The condenser unit has special designed glass tubes that utilize the 1600 cm² surface extremely efficient. That’s why the RV 10 digital delivers reliable and reproducible process results that are usually reserved for more costly systems. Additional features such as smooth start, left-right interval or timer function capability support the user in their daily lab work. Another important aspect of the RV 10 digital are the sophisticated safety features. The motorized lift has an automated lift-out function in case of power outage to prevent superheating of the solvent. Safety temperature circuits can be set individually. Dry-run protection, adjustable lower end stop and lock function of bath setting complete the line of safety features. Type of cooling: vertical Cooling surface: 1600 cm² Speed range: 5 – 280 rpm Reversible direction of rotation: yes Lift: Motor Stroke: 140 mm Heating temperature range: room temp – 180°C Set temperature resolution: ±1 K Filling volume max: 4 l Timer: yes Dimensions (WxHxD): 500 x 430 x 440 mm Weight: 32.36 kg

The Buchi R-205 rotavapor is designed for applications associated with solvent evaporation. This rot (more)avapor is extremely suitable for, among other things, the distillation of solvents, for the evaporation of solvents and suspensions and for the (re)crystallization of liquids in the rotating evaporation flask. The distillations can be carried out under vacuum and atmospheric pressure. This increases performance and helps protect products. Speed: 0-250 rpm External dimensions (WxDxH): 450 x 360 x 1000 mm Pressure: 0 – 1400 mbar Temperature range: 20ºC to 180ºC

The radiomatic model 515 is a high performance flow scintillation analyzer for the qualatative and q (more)uantatative monitoring of single and dua labeled radioisotopic samples. It presents a unique combination of state-of-the-art scintillation counting technology and interchangeable beta/gamma/positron emmission detectors.

Water Specifications: Including 350L storage tank

Maximum Speed: 14000 rpm Maximum Force: 16,750 xg Chamber Temperature: -5°C to 40°C (by 1°C) Rotatio (more)n: 300 -14000 rpm (by 100 rpm), 1 – 100 xg (by 1 xg),  101 – 16,750 xg (by 10 xg) Spin Duration: 0:01 through 0:59 (by 1 second), 1:00 through 4:45 (by 15 seconds), 5 through 360 min (by 1 min), Momentary operation mode, Hold mode (indefinite duration),  Timing mode Repeatability: Temperature Control: +/- 1 C° in the range from +4° C to ambient Rotation to 10 RPM Spin Timing 0.1 seconds Dimensions (HxWxD): 400 x 470 x 690 mm Weight: 73 kg Equipped with: 223A Swing out rotor (max 4400 rpm) 4x Bucket 4x Insert (4x 15 ml falcon tube capacity)

Including Three-Tier Cell Roller Base Capacity : 821.2L Cabinet Material: Cold-rolled steel, powder- (more)coated cabinet Shelves: 6 supplied  (19 max.) Temperature ramp and soak, up to 24 steps Temperature Range: 0° to 60°C Temperature Resolution: 0.1°C Temperature Uniformity: ±0.3 at 25° to 37°C Temperature Sensor: RTD Temperature Accuracy: ±0.1 at 25° to 37°C Compressor: 1/4hp, air-cooled Relative humidity control via steam generator from above ambient to 95% at 37°C Heat Output: 1750W (6000 BTU/hr.) at 220V Adjustable defrost timer; factory set for two 15-min. defrost cycles/24 hr. Refrigerant: CFC-free, R134A Certifications/Compliance: ICH, FDA, TAPPI, ASTM™ Dimensions (d x w x h): 782mm x 1011mm x 2034mm Dimensions Internal (d x w x h): 686mm x 787mm x 1524mm 220V / 50Hz Three-Tier Cell Roller Base (15 positions) Dimensions (d x w x h): 620mm x 757mm x 706mm 220-240V / 50-60Hz

Dimensions (H x W x D): 1730 x 1020 x 780 mm Internal dimensions (H x W x D): 600 x 995 x 600 mm Dia (more)meter of exhaust duct: 250 mm

Pure water requires a storage system to prevent the degradation of your water quality. Merck Millipo (more)re’s 30 liter polyethylene (PE) storage tank is designed to maintain consistent purity of stored water and provide effective protection against airborne contaminants.

Type of movement: orbital Shaking stroke: 10 mm Permissible shaking weight (incl. attachment): 7.5 k (more)g Permissible ON time: 100 % Speed range: 0 – 500 rpm Speed display: LED line Timer: yes Time setting range: 5 – 50 min Operating mode: timer and continuous operation Dimensions (WxHxD): 360 x 98 x 420 mm Weight: 8.5 kg

Dimensions: 900 x 600 x 800 mm

Safe, reliable and economic laminar flow cabinet for protection of the work item, including ergonomi (more)c practical properties needed in normal work. Particle free working conditions in class ISO5. All materials and surfaces are smooth and resistant to cleaning and disinfection agents. Front screen and side panels are made of shock-resistant laminated safety glass. Electrically operated front screen. Glare-free and shadow-free fluorescent lighting providing illumination on work surface 1500 lux Flow control with digital display Alarm for false flow speed 1/2 speed switch Hour counter UV outlet with switch (lamp not included) Base stand 800 mm Down flow 0,4 m/s ± 20% Dimensions (WxDxH): 1930 x 790 x 1460 mm Internal dimensions (WxDxH): 1840 x 600 x 655 mm

All the outstanding features of the Reax Top’s “little brother” can be found in this model: a rotati (more)onal speed of up to 2,500 rpm and a 5 mm shaking orbit. The electronic speed control and the scaling of the speed display allow precise settings. Applications that require a determined speed are thus shaken more gently. Shear force-sensitive organisms remain particularly protected by the constant speed in the low range. Motion: vibrating Rotation speed range: 0 – 2,500 rpm Operating Mode: automatic or continous Orbit/Stroke: 5 mm

110V

Carl Zeiss Axioskop 20 EL-Einsatz 451487 Binocular Transmitted Light Microscope Zeiss Eyepiece PL 10 (more)x/20 (PN 444031 & 444032 ) Zeiss Mechanical XY Stage Specimen Table (PN 453522 ) Zeiss Condenser 0.9 (PN 451754 ) Objectives : Zeiss Achroplan 20x/0.45 Ph2 (PN 440041 ) Zeiss Achroplan 100x/1.25 Oil Ph3 (PN 440081 )

Excluding rotor.

Dimensions (HxWxD): 760 x 1525 x 790 mm

Speed control range: 0 – 3000 RPM Max. stirring volume (water): 5 litres Max. length of magnetic sti (more)rring element (bar): 50 mm Stirring liquid viscosity: up to 1170 mPa.s Maximum continuous operation time: 24 hrs Operation in closed laboratory rooms: at ambient temperature from +4°C to +40°C Working plate size: 110 x 110 mm Working surface material: Stainless steel Overall dimensions (WxDxH): 120 x 150 x 65 mm Weight: 0.8 kg

Dimensions (HxWxD): 1980 x 600 x 620 mm

Strong magnetic field Infinitely variable speed from 0 – 1100 rpm Stainless steel housing facilitate (more)s cleaning and sterilization Dimensions (WxHxD): 140 x 75 x 200 mm Plate (LxW): 140 x 120 mm