Radwag R-Panel

Applied Biosystems/MDS SCIEX Pro ICAT Software for use with ICAT™ Reagents P/N 028450SW100 This was  (more)removed from a university lab where it was surplus to requirements. The item is in good cosmetic condition. There are scratches on the jewel case and signs of age on the booklet. There are no marks on the back of the disc. The item is untested.

Applied Biosystems MDS SCIEX QStar System Software This was removed from a university lab where it w (more)as surplus to requirements. Included are the following: 1x Analyst® QS 1.1 SoftwareP/N 1012847 1x Metabolite ID 1.3 for Analyst® QS 1.1 SoftwareP/N 1012866 1x Analyst QS 1.1 Software Validation CertificateDated 03/12/20041x Metabolite ID 1.3 for Analyst® QS 1.1 Validation CertificateDated 03/12/2004. 2x Copies of License Agreement for Analyst® QS 1.1 Software1x Metabolite ID 1.3 for Analyst® QS 1.1 Software Release Notes

AppliedSensor 3320 w/ PC & NST Senstool Software Lab This was removed from a university lab wher (more)e it was surplus to requirements. The System and Laptop successfully communicated in testing via NST Senstool Software. The system links up but has not been tested further. It is in good cosmetic condition with minor marks. Included with it are; AppliedSensor 3320Model: 3320Serial#: 3320-2014 AppliedSensor Power SupplyType: AS PS 300-15Serial#: PS300-1027 CRS Model 100 Safe Glass Hydrocarbon TrapCat#: 202340 Phillips Monitor, RM Inovator 40X Max PC, RM Keyboard & Fujitsu Siemens Mouse. *Login information available on request*

THERMO Scientific Cellomics ArrayScan VTI HCS Reader This was removed from a university lab where it (more) was surplus to requirements. Everything powers up but has not been tested further at our facility. It is in good cosmetic condition with minor marks. Included with it are; 1x ArrayScan Vti Live Cell moduleP/N: N01-0114M/N: 06112135 1x Carl Zeiss Fc12M/N: FC12S/N: 4632000797 Thermo HCS Studio Cellomics View v6.5.1 software on disc. Software manuals:-HCS Studio Software ClientHCS Studio - ViewCalibration Verification WizardSystem Configuration Tool Other manuals:-Target Activation V3 BioApplication GuideLive Module User GuideRobot Plate Handler User GuideArrayScan HCS Reader Objective Installation GuideStore 1.4.2 Standard Edition New Install User GuideHCi MiddleWare Installation GuideBrightfield Module User GuideLiquid Handling Module Calibration and Testing GuidevHCS TooBox 1.6.2 Installation GuideCalibration Verification Wizard User GuideArrayScan Vti HCS Reader Administrators guide2 x User Guide AddendumLiquid Handling Module Users guideHCS Applications Server Administrators GuideApotome Module User Guide

The MWMH Manager is designed to enable operation of HRP platforms and weighing modules of MWSH, MW (more)LH and MWMH series by means of a PC. The program facilitates mass readout, taring, zeroing, filters setting, internal adjustment, determination of operator’s start mass and user adjustment. Caution: .NET framework 2.0 plugin or later version has to be installed so that the program can operate in MS Windows. The latest software version: 1.0.7.4 Functions: Adjustment of HRP platforms and MWSH, MWLH and MWMH modules, Mass readout from HRP platforms and modules via a computer, Taring and zeroing of HRP platforms and modules via a computer, Weighing filters setting for HRP platforms and modules. ALIBI memory operation, Operation of 3-range verified weighing instruments.

The MW Manager software is intended for support of MW-01 and MW-04 mass converters via a PC. Functio (more)ns: adjustment of MW-01 and MW-04 mass converters (determination of start mass, adjustment coefficient, gravity correction, linearity correction) mass readout from MW-01 and MW-04 converters via a PC screen MW-01 and MW-04 taring and zeroing via a PC linearity determination of MW-01 and MW-04 mass converters setting weighing filters of MW-01 and MW-04 mass converters. .NET framework 4.0 plugin or later version has to be installed so that the program can operate in MS Windows. The latest software version: 3.0.0.1

This listing is for a POWERTECNIQUE Pro 3000 Uninterruptible Power Supply (UPS). SELLERS NOTICE: If  (more)you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFFF068

The LC-NMR-MS Interface is designed to sit between an HPLC system, an NMR spectroscopy probehead and (more) an MS unit. It would normally be mounted on top of the MS table immediately in front of the MS input connector. The BNMI-HP consists of 3 medium pressure (> 60Bar) syringe pumps, a 1:20 splitter, an 8-Port valve, 3 mixing chambers (T-Pieces) and associated control and interface electronics. The flow of the HPLC separations to the MS unit can be modified by pumping additional solvent from the syringe pumps. This improves the MS peak detection and shortens the time needed for the split separation to reach the MS. Separations can also be stored as a result of an MS peak detection as well as through UV absorption peak detection. The splitter splits the fluid flow from the HPLC in a 1:20 ratio. i.e. ca. 5% of the fluid is directed to the MS and the remainder to either the NMR probehead for immediate analysis or to the BPSU36 storage cassette for storage and later analysis.  The fluid directed to the MS is mixed in the mixing chamber (T-Piece) with the solvent pumped from the syringe pumps. The two left hand syringe pumps pump alternatively to guarantee a constant ’makeup’ flow. The 3rd pump at the right hand side is used to pump a calibration fluid into the flow path to allow the MS to be calibrated (or simply synchronized) at the start and end of each measurement cycle. The 8-Port valve is used to direct the fluid flow. Control of the BNMI Unit is performed using the HyStar program via an ethernet interface. Commands received from HyStar are interpreted in the BNMI Control Board. The control board then sets up the BNMI unit accordingly e.g.: Starts the pumps, changes the flow rate, turns the 8-Port valve. The splitter has a fixed mechanical function and cannot be controlled or adjusted. It simply accepts a fluid flow and splits it into 2 paths in a 1:20 ratio. However, other split ratios are available (for example 1:100 may be preferred if you have very high sample concentrations).

Leica TP 1020 Tissue Processor This system was removed from a university laboratory where it was sur (more)plus to requirements. The unit is in good, clean condition, though the left-hand sliding door is cracked. This does not affect operation. The unit powered on with the screen and controls working correctly. Carousel movement on all axis. Specifications:- Model: TP 1020-_-1 - Serial No.: 3741/03.2009 - Activated carbon fume filter installed: 23-08-11 - Wax bath capacity: 1.8 litres (2 baths) - Reagent container capacity: 1.8 litres (10 containers) - Version: V1.13 - Number of programs: 9 - Wax bath temperature range: 45˚C - 65˚C - Excess temperature cut-out: 75˚C ± 4˚C Wax bath test results:- First bath stabilised at 68.7˚C - Second bath stabilised at 69.2˚C - (Tests were conducted without wax.)

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

A rack for under-pan weighing intended for AS and PS balances. The rack is designed for weighing loa (more)ds requiring carrying out the measuring process outside the main weighing platform, e.g. loads with non-standard dimensions and sizes and those generating a magnetic field. The rack also facilitates determining density of loads. The rack is available in powder coated mild steel finishing.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).