General laboratory equipment

Abbott Commander Incubator 8 shelves Type 6210/02

Capacity: 17 L Max temperature: 100°C Max flow rate: 17 L/min Max pump pressure: 300 mbar Dimensions (more) (DxWxH): 457 x 381 x 456 mm Weight: 13.7 kg

The SECTOR Imager offers high sensitivity and six logs of dynamic range. The SECTOR Imager 2400 read (more)s plates at a rate of approximately 3 ½ minutes per plate. Using MSD DISCOVERY WORKBENCH software, all models provide the capability to interact with a third party external robotic controller. The SECTOR Imager 2400 is compatible with: 96- and 384-well MULTI-ARRAY plates 96-well, 4-, 7-, and 10-spot MULTI-SPOT plates Multiplex analysis for the analysis of biomarkers Electrochemiluminescence for detection Single and multiplex plate formats Highly sensitive imaging detection systems Rapid read times (reads a plate in just over 3 minutes) Workstation or automated operation Simultaneous reading of bar code labels on both short and long sides of microplates Six logs dynamic range No complicated fluidics

The Hei-TORQUE 100 is a overhead stirrer with a wide speed range (10 – 2,000 rpm) and a maximum torq (more)ue of 100 Ncm. With it you can optimally stir viscosities up to 60,000 mPas or volumes up to 50 liters (H2O). The Hei-TORQUE 100 performs every stirring task with minimal noise thanks to the latest engine technology. This overhead stirrer is also very user-friendly in terms of operation and safety. The 2.4 inch display makes it very easy to set the application parameters and control the process (e.g. using the torque trend display). The safety-related start/stop touch-function serves to minimize the risk of unintentional switching on. Suitable for use in fume hoods or as a drive for reactor superstructures, the Hei-TORQUE 100 has a quick-action chuck (quick chuck with safety ring) with a diameter of 10.5 mm, which can be combined with a large number of stirring tools. Rotation speed range: 10 – 2000 rpm Rotation speed indicator: digital Speed control: electronic Maximum torque: 100 Ncm Torque indicator: symbol Overheat protection: automatic cut-out Maximum viscosity: 60000 mPa s Stirring capacity (H2O): 50 l Throught-shaft design: yes Maximum shaft diameter: 10.5 mm Including tripod and a PR 31 Ringed Pitched-Blade Impeller Due to its blade dimensions, the ringed pitched-blade impeller PR 31 is ideal for solutions, emulsions and suspensions in vessels with the following characteristics: Ideal vessel diameter: 83 – 165 mm Ideal ground clearance: 17 – 33 mm Ideal filling level: 83 – 165 mm Ideal volume: 400 – 3500 ml The ringed pitched-blade impeller PR 31 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm.

Dimensions (WxHxD): 600 x 600 x 580 mm

Dimensions (WxHxD): 600 x 460 x 580 mm

Dimensions (WxHxD): 900 x 600 x 580 mm

Dimensions (HxWxD): 1750 x 860 x 520 mm

Dimensions (HxWxD): 1920 x 1200 x 560 mm

Interfurn Hanging Cabinet Sliding Door Blue 1460x600x330

S+B End Sink Set Island Tabel White 1500 wide

Equipped with non-slip rubber mats on the shelves.

WRT Laborbau Fumehood 1800

Vinitex Door cabinet high LT White 600

Vinitex 3 Drawer cabinet low White

S+B Door cabinet low LT White 600

Print resolution: 203 dots/inch, 8 dots/mm or 300 dots/inch, 12 dots/mm Dot size (WxL): 203 dpi – 0. (more)125 x 0.125 mm, 300 dpi – 0.084 x 0.099 mm Maximum print width: 203 dpi – 104 mm, 300 dpi – 106 mm Bar code modulus: 203 dpi – 5 mil to 50 mil, 300 dpi – 3.3 mil to 33 mil Programmable constant print speeds: 51, 76, 102, 127 and 152 mm/s Media label length: Minimum (tear off) – 17.8 mm, Minimum (peel off) – 12.7 mm, Maximum – 991 mm Media label width: Minimum – 19 mm, Maximum – 114 mm Media total thickness (including liner, if any): Minimum – 0.076 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm, 25 mm core – 152 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 109 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m, 3:1 media to ribbon roll ratio – 450 m Ribbon core inside diameter: 25.4 mm Dimensions (HxWxD): 295 x 272 x 477 mm Weight: 12.4 kg

Capacity: 6100g Readability: 1 g Dimensions (WxDxH): 195 x 315 x 90 mm Weighing platform (WxD): 185  (more)x 230 mm

Temperature Range: Ambient +5°C to 130°C Heating Rate: ≤ 25 min. 30° to 130°C Block capacity: 4 (not (more) included) Temperature Accuracy: ≤ ± 0.5°C Temperature Uniformity: ≤ ± 1°C Timer: 0 to 99:59 min or continuous Dimensions (LxWxH): 450 x 200 x 100 mm Weight: 4.7 kg

TSP HPLC P4000 + AS3000

Type of movement: orbital Shaking stroke: 4.5 mm Permissible ON time: 100 % Speed range: 200 – 2500  (more)rpm Speed display: scale Operating mode: continuous operation Touch function: yes Dimensions (WxHxD): 115 x 80 x 230 mm Weight: 3.2 kg

Dimensions (HxWxD): 1841 x 660 x 683 mm Internal dimensions drawer (HxWxD): 190 x 465 x 400 mm Capac (more)ity: 305 L

Downflow velocity: 0.35 m/s Sound level: < 58 dBA Light intensity: > 800 lux Pre-filter (EN 779): G4 (more) Horizontal HEPA filter (EN 1822): H14 Dimensions (WxDxH): 1595 x 740 x 1360 mm Interior dimensions (WxDxH): 1495 x 600 x 685 mm Height with support frame: 2240 mm Aperture height (work mode/maximum): 165/375 mm Weight: 200 kg

Temperature range: RT +5 to 95°C and heat setting Capacity: 14 liters Dimensions bath (LxWxH): 350 x (more) 290 x 140 mm Basic temperature controller Stainless steel housing and interior Weight: approx. 15 kg