Easily list your scientific equipment

Top suppliers for laboratory & industry

New and used instruments

Marketplace
Analytics

General laboratory equipment

Equip your lab with our extensive range of general laboratory equipment. From basic essentials to advanced instruments, our selection ensures that your lab is fully equipped to handle a wide array of scientific tasks with precision and efficiency. Shop Now!

Agilent / Keysight N4851A MIPI D-PHY Digital Acquisition Probe N4860A N4850A-cover
Agilent / Keysight N4851A MIPI D-PHY Digital Acquisition Probe N4860A N4850A

Manufacturer: Agilent / Keysight Model: N4851A MIPI D-PHY Digital Acquisition Probe S/N: MY47000108  (more)Description: The N4851A MIPI D-PHY acquisition probe and N4861A MIPI D-PHY stimulus probe  enable users to perform real-time digital serial analysis and generate real-time digital serial stimulus of the MIPI D-PHY interface. Both  probes support the CSI-2 (Camera Serial interface) and DSI (Display Serial Interface), enabling users to comprehensively characterize the  behavior of controllers as well as display or camera devices. The Keysight Technologies N4851A acquisition probe and the N4861A stimulus probe  operate in conjunction with Keysight 16800 and 16900 Series logic analyzers to provide the digital serial stimulus and acquisition  capabilities required to independently debug and test MIPI D-PHY components, or integrate your MIPI D-PHY based mobile designs. State Analysis for MIPI D-PHY Compliant Devices • Maximum acquisition speed: 800 Mbps• Voltage level support: Low power and high speed voltage• Protocol support: DSI (Display Serial Interface), CSI-2 (Camera Serial  Interface)• 1 or 2 lane support Monitor Device and System Operation • Real-time acquisition of MIPI D-PHY traffic with hierarchical trace displaying  capabilities• Tracks bus mode changes and bi-directional communication• CSI-2 and DSI Protocol Decoder and Packet Viewer• Triggers on protocol-specific packets, specific bits within a packet, and  protocol violations Additional Capabilities • LEDs show MIPI D-PHY bus status and error conditions• Multiple probing solutions, including flying leads and soft touch• Supports up to 2048 bits for user-defined payload• Customize MIPI D-PHY protocol decoding with B4641A Protocol Development Kit Configuration Considerations • Requires 16800 or 16900 Series logic analyzers with 68-channels or more• High impedance probing for signal integrity E5381A• For stimulus, add a pattern generator and N4861A MIPI D-PHY Digital Stimulus  Probe Option: 010 Items delivered: - N4851A MIPI D-PHY Digital Acquisition Probe- Power Supply The probe is in excellent cosmetic condition and is 100% functional tested -  comes out of operation.Ready for your application.

€1,200.00 ex VAT
€1,428.00 incl. VAT if applicable
Germany
general laboratory equipment other
ChemoMetec A/S Eppendorf Mammalian Cell Counter 900-001 NucleoCounter NC100-cover
ChemoMetec A/S Eppendorf Mammalian Cell Counter 900-001 NucleoCounter NC100

Manufacturer: ChemoMetec A/S Model: Mammalian Cell Counter NucleoCounter® NC-100™ P/N: 900-0001 S/ (more)N: CM01-003-08 Description: The Mammalian Cell Counter NucleoCounter® NC-100™ is a unique automated cell counting device for mammalian cultures (equivalent to the Eppendorf Nucleocounter® NC-100 Cell Counter). The NucleoCounter system uses the same basic principles to determine cell concentration as used in conventional methodology involving a hemacytometer and microscope.However, the compact NucleoCounter system adds the precision and reliability of fluorescence microscopy technology. The NucleoCounter automates this time-consuming task, eliminating manual evaluation, and errors caused by operator subjectivity. It is a compact instrument which fits perfectly in any mammalian cell laboratory performing e.g. research, quality control or monitoring of production. An integrated fluorescence microscope is designed to detect signals from the fluorescent dye, propidium iodide (PI) bound to DNA. Results from the NucleoCounter® represent either total or nonviable cell concentration, depending on the sample preparation. The NucleoCounter method provides a fast alternative to the manual techniques, yielding objective and reliable results. Furthermore the NucleoCounter technology provides improved safety to the user compared to other comparable methods. The NucleoCounter system identifies and counts individual cell containing stained DNA. It is an image cytometer based on fluorescencefrom the fluorescent dye, propidium iodide (PI). The NC-100™ eliminates human subjectivity and can count even the most aggregated mammalian cells. The NucleoCounter® NC-100™ can be connected to a PC using the USB port on the rear. Features: - Precise, robust and fast determination of cell count and viability- Easy and accurate operation- 30 sec. analysis time- No cleaning or calibration- Maintenance and service free- Excellent reproducibility- Safe sample handling and disposal- Excellent for aggregated cells Specifications: - Loading volume: 60 µl is loaded into the NucleoCassette™- Measurement volume: 2 µl in the measurement chamber of the NucleoCassette™- Analysis volume: Approximately 2 µl of the sample loaded into the NucleoCassette is transported to the chamber and is analyzed- Analysis time: 30 seconds- Operation: Menu-controlled by means of keyboard and LCD display- Power Input: 12VDC (11-13VDC)- UL Listed fuse: 600mA/250Vac (UL 248)- Power consumption NucleoCounter:Peak: 25 WReady mode: 2.5 WStandby: 2 mW- Operation conditions: Maximum relative humidity 80 percent for temperatures up to 31°C decreasing linearly to 65 percent relative humidity at maximum 35°C; minimum temperature 15°C- USB: USB, version 1.1. (Note: Does not support USB Hubs)- Physical data:Weight 3 kg H x W x D: 26 x 38 x 22 cm Items delivered: - ChemoMetec A/S Mammalian Cell Counter 900-0001 NucleoCounter® NC-100™ - Instruction manual as PDF via e-mail request Condition: The unit is in good cosmetic condition, 100% functional tested and ready for you to use.

€2,750.00 ex VAT
€3,272.50 incl. VAT if applicable
Germany
general laboratory equipment other
AIRFLOW TA2-2 Thermisches Anemometer Thermometer 0-2 M/S 0-80°C Velocity-cover
AIRFLOW TA2-2 Thermisches Anemometer Thermometer 0-2 M/S 0-80°C Velocity

Hersteller: AIRFLOW Lufttechnik GmbH Modell: TA2-2 thermisches Anemometer / Thermometer Beschreibung (more): Die Baureihe der thermischen Anemometer TA2 von AIRFLOW wird aus Materialien hoher Qualität hergestellt. Die moderne Konzeption dieser Geräte basiert auf jahrzehntelanger Erfahrung mit thermischen Anemometern und vielen Anregungen aus der messtechnischen Praxis. Vom Prinzip her sind thermische Anemometer besonders für niedrige Strömungsgeschwindigkeiten geeignet, da sie keine beweglichen Teile aufweisen, wo mechanische Widerstände zu überwinden wären. Die Schwierigkeiten dieses Messprinzips, den Einfluss der Temperatur der strömenden Luft auf das Messergebnis auszugleichen, wurde bei den TA-Instrumenten durch einen zusätzlichen, unbeheizten Kompensations-Thermistor im Fühler gelöst.TA2 Geräte sind mit einer Teleskopsonde ausgestattet, die bis 93 cm Länge ausziehbar ist. Dadurch können Messungen an sonst schlecht zugänglichen Luftaustritten oder in Lüftungskanälen durchgeführt werden. Es stehen 3 Messbereiche zur Auswahl die durch unterschiedliche Modelle gelöst wurden. Dieses Angebot beinhaltet das Model TA2-2 für eine Geschwindigkeit von 0-2 m/s. Wir haben noch das Modell TA2-15 für 0-15 m/s und das Modell TA2-30 für 0-30 m/s im Angebot - Besuchen Sie einfach unseren eBay Shop. Spezifikationen: Messbereich m/s:  0-2 m/s (max. Toleranz bis 0.5 m/s ±0,03 m/s, darüber ±0,05 m/s)Messbereich °C:  0-80 °C (max. Toleranz bis 60°C ±1 °C, darüber ±1,5 °C)zuläss. Betriebstemp.: 0-80 °CMaße der Teleskopsonde: 144 - 930 mmStromversorgung:  4x 1,5V Mignon (AA) Batterien oder NC-AkkusBatterie-Lebensdauer: ca. 30 BetriebsstundenAbmessungen:   185 x 92 x 30 mmGewicht:    540g (inkl. Batterien) Lieferumfang: - AIRFLOW TA2-2- Sonde (0-2 m/s)- Betriebsanleitung- Aufbewahrungskoffer Das thermische Anemometer TA2-2 ist in einem guten Zustand und ist 100% auf Funktion geprüft.

€250.00 ex VAT
€297.50 incl. VAT if applicable
Germany
general laboratory equipment other
Eaton Singer Ailtech Stoddart NM-37/57 EMI/Field Intensity Meter 1000MHz 140dB-cover
Eaton Singer Ailtech Stoddart NM-37/57 EMI/Field Intensity Meter 1000MHz 140dB

Manufacturer: SINGER / EATON Corp. Model: NM 37/57 SL-A S/N: 180 Description: The NM-37/57 (Ailtech, (more) Singer, Stoddart) EMI/Field Measuring Receiver (Field Intensity Meter) performs manual or programmable EMI emission measurements from 30 MHz to 1000 MHz. Four switchable bandwidths: 10 kHz, 100kHz, 1 MHz It incorporates an internal solid-state impulse generator as calibration source. Easy-to-read 60 dB meter scale and 80 dB attenuator (5 steps). Overall measurement range: 140 dB (0.1 µV to 1.0 V) Mains operation as well as internal or external battery operation. Detector Functions: - Field intensity - Quasi peak- Peak - Slideback peak Items delivered: - EATON NM 37/57 - Power Cord The instrument is in used cosmetic conditiond and 100% functional tested. Hersteller: SINGER / EATON Corp. Modell: NM 37/57 SL-A S/N: 180 Beschreibung: Der NM-37/57 (Ailtech, Singer, Stoddart) Störmessempfänger (FeldstärkeMessgerät) bietet einen Frequenzbereich von 30 MHz bis 1000 MHz. Der Messbereich ist unterteilt in 8 Bereiche. 3 umschaltbare Bandbreiten: 10 kHz, 100kHz, 1 MHz Pegelbereich: 140 dB (0,1 µV- 1V) Leicht ablesbare 60 dB-Skala und 80 dB-Abschwächer (5 Stufen). Eingebauter Kalibrator Bandüberwachung im Wobbelbetrieb - Ausgabe auf XY-Schreiber möglich. Netz- oder Batteriebetrieb (eingebaute Akkus) oder externe Batterie. Betriebsarten: - Feldstärke - Quasi Peak - exponentielles Abklingverhalten - Peak - RMS - Slideback peak - manuelle Kompensation Lieferumfang: - EATON NM 37/57 - Stromkabel

€500.00 ex VAT
€595.00 incl. VAT if applicable
Germany
general laboratory equipment other
AIRFLOW LCA6000VT Precision Anemometer / AIR-Velocity Meter 0.25-30 m/s +/-1%-cover
AIRFLOW LCA6000VT Precision Anemometer / AIR-Velocity Meter 0.25-30 m/s +/-1%

Hersteller: AIRFLOW Lufttechnik GmbH Modell: LCA6000 VT Luftströmungs-Messgerät..................... (more) Precision High Resolution Anemometer Beschreibung: Das LCA 6000 VT ist ein einfach zu handhabendes Messgerät für Luftströmungen mittels direkt am Messgerät angebrachten Flügelrad-Strömungssensor.Dieses Präzisions-Flügelrad sichert eine sehr hohe Auflösung bei niedrigen Luftgeschwindigkeiten ( z.B. am Arbeitsplatz ) Flügelradanemometer der Reihe LCA verfügen über eine Digitalanzeige der Strömungsgeschwindigkeit in m/s. Konstruiert für einfache Handhabung verfügt die LCA-Reihe über einen Kontrollschalter seitlich am Griff. Um das Gerät ein bzw., auszuschalten ist eine Schiebeschalter vorhanden. Spezifikationen: Geschwindigkeits-MB:   0.25 – 30 m/sec, Kalibriert < +/-1%, Messwert +/- 1 DigitGenauigk. bez. a. Umgebungsbed.: 20 °C, 1013 hPaMax. Mittelwertzeit:     AVERAGE .....12 Minuten Zulässige Umgebungsbedingungen: Barometrischer Druck:   500 mbar bis 2 bar, Temperatur ,-10 bis +50 °CLagertemperatur:    -10 bis +50 °CMaße (H/B/T):     268 x 113 x 43 mmGewicht:      (oh. Batt.) 280 gEnergieversorgung:    1x 9 V PP3 Alkaline (IEC 6F22) oder gleichwertigBatterie Nutzungsdauer:   ca. 40 h Lieferumfang: - AIRFLOW LCA 6000 VT Flügelradanemometer- Aufbewahrungsetui- Bedienungsanleitung Das LCA6000 VT ist in einem sehr guten Zustand und 100% auf Funktion geprüft

€500.00 ex VAT
€595.00 incl. VAT if applicable
Germany
general laboratory equipment other
Batch(5) THALES YD1048 RADAR  Planar Triode  BRANDNEW Spare Parts (July 2003 )-cover
Batch(5) THALES YD1048 RADAR Planar Triode BRANDNEW Spare Parts (July 2003 )

one BATCH of 5 piecesMetal Ceramic Planar Triode , High Power, High Precision Special Purpose TYPE   (more)for Professional and MIL SPECS - Application i.e. in AIRBORNE DEVICES Manuf.  THOMSON TUBES / THALES / EADS Model YD 1048 NSN 5960-12-165-6996 manufactured 07/2003; NEW and originally packed - see PHOTO the here offered tube has much higher specs and reliability than the normal on the market available YD1048s from SIEMENS or others, which are out of old stocks and have been manufactured in the 1970s description:  ( DATASHEET available as pdf with email, please ask if you want to get one ) metal ceramic construction ..........high power planar triode.......AIR-cooled......Oxide-cathodemax. frequency > 3.5 GHzuse for RF - amplifiers, grid-or plate- pulsed oscillators, frequency- multipliers, switching of high plate voltageshigh amplification factor and trans-conductance; special in frequency stability filament with indirect heating  ( Vf)........................................6.3 V....1.35 Apulsed plate voltage.................................................................8.5 kV ( cold 10 kV )average anode current............................................................. 50 mAanode dissipation...................................................................... 250 Wgrid voltage.................................................................................. - 200 Vaverage grid current.................................................................. 18 mAgrid dissipation........................................................................... 1.5 Wmaximum anode temperature................................................. 200 °Cmaximum enveloppe temperature......................................... 250 °Ctransconductance ( S ) ............................................................. 25 mA / V ( typical )amplification factor ( my)........................................................... 105 ( typical ) to 150 ( max)capacitances -  1 MHz capacitance bridge - ......................... Kg1 = 8.8 to 9.8 pF..............g1A = 1.8 to 2.1 pF...............KA = 0.037 pF The Tubes are BRANDNEW Originally Packed ......  out of NEW PRODUCTION ; The LOT we offer, was manufactured  in July 2003;so tube will be delivered with our 2 years Warranty we have many of these tubes in our stock.... please ask for a pecial offer for larger Quantities

€587.39 ex VAT
€698.99 incl. VAT if applicable
Germany
general laboratory equipment other

Your One-Stop Shop for General Laboratory Equipment

At QuestPair, we offer a vast selection of general laboratory equipment that forms the backbone of any scientific research or testing facility. Our collection includes everything from basic instruments to specialized devices, all designed to meet the rigorous demands of modern laboratories. Whether you're setting up a new lab or upgrading existing equipment, you'll find what you need to ensure accuracy, safety, and efficiency in your work.

Why Choose QuestPair's General Laboratory Equipment?

  • Wide Range of Products: We provide a comprehensive selection of lab equipment, from essential glassware and centrifuges to precise scales and reliable lab ovens.
  • Quality and Reliability: Our products are sourced from trusted manufacturers and are designed to deliver consistent performance, ensuring accurate and repeatable results.
  • Cost-Effective Solutions: We offer competitive pricing on all general laboratory equipment, making it easier to equip your lab without breaking the budget.
  • Expert Support: Our team of experts is available to help you select the right equipment for your specific needs, ensuring optimal performance in your lab.

Explore Our General Laboratory Equipment Categories

Our general laboratory equipment is categorized to help you find exactly what you need quickly and easily:

  • Lab Heating and Cooling Systems: Ensure precise temperature control in your experiments with our reliable heating and cooling systems, designed for a wide range of laboratory applications.
  • Lab Pumping Systems: Our selection of pumping systems provides efficient and reliable fluid handling solutions, essential for maintaining flow rates and transferring liquids safely.
  • Lab Stirrers: Achieve consistent mixing with our high-quality stirrers, suitable for various viscosities and volumes in both simple and complex applications.
  • Lab Centrifuges: Explore our range of centrifuges, perfect for separating substances with precision in research, clinical, and industrial settings.

Equip Your Laboratory for Success with QuestPair

Having the right equipment is essential for the success of any laboratory. QuestPair offers a wide range of general laboratory equipment that meets the highest standards of quality and performance. Whether you’re conducting basic experiments or advanced research, our equipment ensures that you have the tools you need to achieve accurate and reliable results.

Need Help Choosing the Right Equipment? Our knowledgeable team is here to assist you in selecting the best general laboratory equipment for your specific applications. Contact us for expert advice and personalized recommendations.

Disclaimer: QuestPair assumes no responsibility or liability for any errors or omissions in the content of this site. The information contained in this site is provided and presented on an “as is“ basis with no guarantees of completeness, accuracy, usefulness or timeliness.

Customer Service

Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.

We are available to assist you Mon-Fri, 10am - 5pm CET.

+31 (0) 73 7114717
[email protected]