BioTherm BioOven III

Thermo Scientific HERACELL 150i GP Co2 incubator / oven In excellent condition, only used 6 months.  (more)Thermo reference: 51032719 Years of manufacture: 2021 Forced convection Volume: 151 liters Stainless steel chamber iCAN touch screen Patented humidification system without water tray for rapid return to set points Temperature regulation range. : TA+3 at 55°C Constant humidity: 95% ± 3 Hr CO2 regulation range: 0 to 20% Heat emission at 37°C: 0.06 kWh/h CE certification 230 V, 50/60 Hz Ext. sun. (L x H x D) mm: 637 x 867 x 782 Sun Int. (L x H x D) mm: 470 x 607 x 530 Weight: 70 kg Supplied complete with: 1 CO2 thermal conductivity (CT) sensor 1 water level sensor 3 stainless steel shelves 423 x 465 mm 1 42 mm cable passage 1 interior glass door with closure Tested at 37°C CO2 at 5% Year of manufacture: 2021

Suitable for laboratories that need to sterilize small tools, this small stove has excellent thermal (more) stability, with natural ventilation.     Inner chamber in aluminum for better heat diffusion.     Front panel with bimetallic thermoregulator with fluid expansion probe, mechanical timer from 0-120 minutes + infinite.     Equipped with 2 shelves with the possibility of inserting up to 5     Protection class IP40

Hybaid Maxi 14 Rotisserie Hybridisation Oven This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order when heated to 36ºc, when set to 100ºc item would not climb beyond 60ºc. The shaking plate and Rotisserie shaker are both in good working order. It is in reasonably good cosmetic condition with surface damage present.

Vacucell Evo 111 Double Compartment Vacuum Oven With Vacustation Lab This item was removed from a un (more)iversity where it was surplus to requirement. It is in excellent cosmetic condition and full working order. The previous client has stated that it was not used since its purchase in 2018. This item requires a Password for operation, which is available on request when purchased. Also includes the following: 1 x Vacuubrand Chemistry Hybrid RC 6 Pump- Full working order. 1 x Epson Printer- Full working order.

Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V Working Temperature Range At least  (more)10°C above ambient to +250°C Setting Resolution (Temperature) Up to 99.9°C: 0.1°C / From 100°C: 0.5°C Chamber Volume 256L (9.04 Cu. Ft.) Features - Working temperature range from at least 10°C above ambient to +250°C - Volume capacity of 256L (9.04 Cu. Ft.) with stainless steel interior - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Forced air circulation adjustable in 10% steps, with pre-heated fresh air admixture - AutoSAFETY system with integrated over- and undertemperature protection - Supports up to 9 shelves with a maximum chamber load of 661 lbs - Three freely selectable temperature calibration points - Function SetpointWAIT ensures process begins only once set temperature is reached The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V is designed to provide exceptional precision and reliability for temperature-sensitive processes. With a working temperature range of 10°C above ambient to +250°C and a spacious 256-liter stainless steel interior, this oven is perfect for demanding laboratory and industrial applications. The TwinDISPLAY system, featuring two high-definition TFT-color displays, allows for precise control, while the adaptive multifunctional PID-microprocessor controller ensures accurate and uniform temperature management. Forced air circulation can be adjusted in 10% increments, with a pre-heated fresh air admixture, enhancing efficiency and temperature stability. This pass-through oven offers advanced safety features, including the AutoSAFETY system with integrated over- and undertemperature protection, along with visual and acoustic alarms. With support for up to nine shelves and a maximum chamber load of 661 lbs, the UF260TS can accommodate large samples or multiple smaller items with ease. Additional features such as the SetpointWAIT function, which ensures the process begins only after the set temperature is reached, and the HeatBALANCE function, which optimizes heating performance, make this oven a valuable asset for any lab or production environment. INCLUDED: The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Base Cladding with Screw Connection - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UF160TS Forced Circulation Pass-Through Oven 161L, 115V Working Temperature Range At least  (more)10°C above ambient to +250°C Setting Resolution (Temperature) Up to 99.9°C: 0.1°C / From 100°C: 0.5°C Chamber Volume 161L (5.68 Cu. Ft.) Features - Working temperature range from at least 10°C above ambient to +250°C - Volume capacity of 161L (5.68 Cu. Ft.) with stainless steel interior - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Forced air circulation adjustable in 10% steps, with pre-heated fresh air admixture - AutoSAFETY system with integrated over- and undertemperature protection - Supports up to 8 shelves with a maximum chamber load of 462 lbs - Three freely selectable temperature calibration points - Function SetpointWAIT ensures process begins only once set temperature is reached The Memmert UF160TS Forced Circulation Pass-Through Oven 161L, 115V offers advanced precision and reliability with a working temperature range from at least 10°C above ambient to +250°C. Designed with a spacious 161L (5.68 cu.ft.) interior, this oven features a stainless steel chamber reinforced with deep-drawn ribbing, providing both durability and ease of cleaning. The TwinDISPLAY control system, equipped with two high-definition TFT-color displays, allows for adaptive multifunctional temperature management, ensuring accurate control via two Pt100 sensors in a 4-wire circuit for mutual monitoring. Additional features include forced air circulation, adjustable fan speed in 10% increments, and pre-heated fresh air admixture for optimal thermal distribution. For enhanced safety, the Memmert UF160TS includes the AutoSAFETY system, which provides integrated over- and undertemperature protection, as well as a mechanical temperature limiter (TB) that switches off heating at 20°C above the nominal temperature. The Function SetpointWAIT ensures the process begins only once the set temperature is reached, while the Function HeatBALANCE allows precise adjustment of heating performance. With a maximum loading capacity of 462 lbs, spread across up to 8 shelves, this oven is ideal for demanding laboratory applications requiring consistent, reliable performance. INCLUDED: The Memmert UF160TS Forced Circulation Pass-Through Oven 161L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Base Cladding with Screw Connection - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Manufacturer: Implen  Model: NP80 Touch  Description: The flexible Implen NanoPhotometer™ NP80 UV-Vi (more)s spectrophotometer enables cuvette and NanoVolume measurements. It provides complete scan data from 200 to 900 nm for various life science applications such as the quantification of nucleic acids, proteins or cell cultures. The stand-alone design with integrated touchscreen and small footprint makes it ideal for laboratory work. Disturbing surface tension and evaporation effects are eliminated by compressing the sample. No recalibration is required throughout its lifetime. Key features: - dsDNA detection range: 1 ng/µl to 16,500 ng/µl - BSA detection range: 0.03 mg/ml to 478 mg/ml - Minimum sample size: 0.3 µl - Scan range: 200 to 900 nm - Cell power: 0 to 2.6 A - Integrated vortex for tubes up to 2.0 ml - Time measurements for the entire scan range: 2.5 to 4.0 seconds - Pre-programmed applications for (labelled) nucleic acids (DNA, RNA, oligos), (labelled) proteins, protein assays (Bradford, BCA, Lowry), kinetics, OD600 and manual methods - The automatic sampling function is started automatically as soon as the sample arm is closed - Thanks to True Path Technology™, recalibration is not necessary - Independent of the surface tension of the sample thanks to Sample Compression Technology™ - Sample Control™ and Blank Control™ for analysing sample quality and identifying impurities - Control options: Integrated 7-inch touchscreen, computer and tablet - Input & output ports 2x USB A, USB B, HDMI, Ethernet, WLAN - Software, compliant with 21 CFR Part 11 (optional) - Integrated file server - LIMS integration via REST API - Manufactured in Germany Technical data: Extinction accuracy: < 1.75 % at 0.7 A at 280 nm of the measured value Height of the beam centre: 8.5 mm Detector type: CCD array with 3648 elements Dimensions (L x W x H): 20 x 20 x 12 cm Light source: Xenon flash Voltage: 90/250 V For use with (application): Nucleic acids, protein UV, protein assays, kinetics, OD600, wavelength, wave scan, standard curve, absorbance ratio, concentration, user defined Measuring range: 1 to 16,500 ng/μl Model: NP80-Touch Operating temperature of cuvette: 37 °C ±0.5 °C Processor: Linux-based NPOS Stray light: < 0.5 % at 240 nm with NaI Wavelength accuracy: ± 0.75 nm Extinction range: 0.02 to 330 A NanoVolume, 0 to 2.6 A cuvette Connections: 2x USB A, USB B, Ethernet, WLAN Display: Glove-compatible 7-inch touchscreen, 1024 x 600 pixels Languages: English, French, German, Spanish, Portuguese, Russian, Chinese, Japanese Spectrum bandwidth: <1.8 nm Wavelength range: 200 to 900 nm Measuring time: 2.5 to 4.0 s Number of samples: 1 Layer thickness: 0.67 and 0.07 mm Sample volume (metric): 0.3 to 2 μl System requirements: Windows 7, 8, 10 (32 and 64 bit); OS X, iOS; Android operating system Weight (metric):5 kg The device/system offered here has been tested and is fully functional and ready for use.

Varioshake shaking incubator These LAUDA tools are renowned for being extremely reliable and suitabl (more)e for heavy use. Specialized in gentle mixing and vigorous shaking, these shaking incubators are used for applications that require repeatable orbital movements and temperatures up to +70°C with excellent stability. They are preferred by standard or research laboratories for incubation, fermentation, homogenization, chemical and biochemical reactions, enzyme and tissue studies, as well as for the cultivation of bacterial cultures. Applications: homogenization, incubation, fermentation or chemical and biochemical reactions. The control panel features soft-touch keys with clear symbols. It will therefore be very easy to set the temperature, the stirring frequency or the incubation time quickly and precisely, rest assured that the technology of these instruments will exactly reproduce the set values. The temperature - Temperature regulation is controlled by a microprocessor, PID type with RS232 interface. - The temperature distribution is optimal throughout the interior of the cabinet. - Temperature setting and display: digital, LED, in 0.1°C increments. - Temperature range: from 8°C above ambient temperature to + 70°C. - Temperature range (with cooling coil; not included): 20 to 70°C, depending on the cooling medium used and the ambient temperature. - Electronic monitoring of the temperature controllers activates visual and acoustic alarms in the event of a fault. In these cases the heating switches off automatically and the cause of the anomaly is shown on the display. Agitation and Incubation - Quiet and robust stirring mechanism with gentle start and smooth, load-independent orbital motion - The orbital motion can be turned on and off - Shaking frequency and incubation time can be set thanks to the microprocessor. - The timer continuously displays the remaining incubation time and acoustically signals its expiration. Specific features of the VS 60 OI model This model, with a liftable acrylic glass cover, consists of an external housing made of electrolytically galvanized and powder-coated sheet steel. The vibrating platform, made of aluminum, has 4 plastic pins to accommodate a vibrating tray or a universal support. - Stirring width: 30 mm - Usable volume 68 L - Shaking frequency min. 20 min-1 - Shaking frequency max. 250 min-1 - Shaking width 30 mm - Load capacity max. 12 kg - Timer from 1 minute to 999 - Vibrating platform width 450 mm - Vibrating platform depth 450 mm - Capacity approx. 60 L / 1 stirring tray

22 x High Perfection LP1090-36-GG-290 These were removed from a university lab where they were surpl (more)us to requirements. The units are all inside open boxes and are all in good cosmetic condition. We were unable to test them Model LP1090-36-GG-290Part No. 20-3406 REV: A Power supply dims:L32cm x W6cm, x H4cm

Pitco 35C+ 16 Ltr Tube Fired Gas Commercial Deep Fat Fryer This was removed from a university cateri (more)ng department. It was surplus to requirements. The unit has not been tested as we do not have a gas supply at our facility. It is in reasonably poor cosmetic condition and is in need of a deep clean, and some maintenance.

Labconco SecondaryVacuum Trap, 2L, 9-3/4" h x 7-7/8" dia. with 3/4" connection For processing sample (more)s with low eutectic points. Trap connects in series with a freeze dry system or vacuum evaporation system and vacuum pump to prevent contaminants from migrating into the vacuum pump. An insulated well, when dry ice and solvent are added, cools to approximately -75C (-103F). When used alone, Dry Ice Secondary Trap may serve as an inexpensive collector. Simply connect a sample directly to the incoming port and add a vacuum pump to the outgoing port. Dry ice and solvent, such as alcohol, are required (not included). Features Trap will cool to approximately -75C (-103°F) with dry ice and solvent in its removable well Can be used as an inexpensive collector: connect a sample to incoming port, vacuum pump to outgoing port, and system is complete Stainless-steel, with cover INCLUDED: The Labconco 7538000 SecondaryVacuum Trap, 2L, 9-3/4" h x 7-7/8" dia. with 3/4" connection includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty