General laboratory equipment

Artificial single-crystal leucosapphire rods. Produced in USSR, 1985-1988. There are about 80 big (more) rods with length from 50 to 295 mm and diameter from 14 to 20 mm. On the photos 1-4 the rod with dimensions 251*16 is shown as example. And also 178 small rods with length 20...50 mm and diameter 1...3 mm are available. One end surface is polished and another end surface is matted. Side surface is also matted. There are no defects (cracks, splits) observed. Ideal light transmission! Can be used as a light-guide in harsh environment (high-temperature, corrosion, etc) or as a raw material for optical components such a lens, windows production. The price mentioned in advertisement reffers to the rod 251*16 mm.

Termaks B8054 is a compact incubator that takes up little space with a capacity of 54 L. The interio (more)r and shelves are made of stainless steel. The exterior is made of galvanized steel coated with a special gray epoxy paint. The exterior shows some signs of cosmetic wear but functionality is good. Temperature range up to 70°C, PID temperature controller, digital setting and display, glass inner door, 4-speed fan for fast and better temperature uniformity inside, timer and audible alarm. Includes two shelves but only three side connectors, so one tray can only be placed on the bottom unless an additional side connector is found. External width x depth x height = 59.5 x 56 x 57 cm, internal W x D x H = 40 x 33 x 36 cm, weight 41 kg, voltage 230 VAC, power 330 W.

For decades, Finnpipette pipetting systems have delivered unmatched productivity and ergonomics acro (more)ss thousands of labs and applications worldwide. One family of pipettes is all you need to comfortably meet any application challenge.

Bandelin HD3400 SONOPULS ultrasonic homogenizers with amplitude adjustment from 10 to 100 % and actu (more)al value display, pulse rate, AMPLICHRON® mode (which guarantees a constant amplitude regardless of changing conditions), integrated timer, remote control. Usage areas Disruption of cells, bacteria, virus, tissue (cell deterioration) Production of the best emulsions Homogenization of substances Sample preparation for HPLC Degassing of fluids Sample preparation for particle size analysis Accelerating chemical reactions Waste water analysis

Capacity: 48mL (24 × 1.5/2mL tubes) Maximum speed/RCF: 13,300rpm/17,000xG Easy-to-use controls with  (more)digital display Adjustable 99 minute timer and quick-spin feature for short runs Memory retains last setting for repeatable runs Supplied with rotor and biocontainment lid

Transfer pipets are plastic and offered in both graduated and ungraduated formats with integral bulb (more)s or accessory bulbs for transferring liquids. Graduated transfer pipets allow easy viewing and volume indication. While useful for dispensing measured volumes, transfer pipets are not considered precision instruments. Thermo Scientific Samco Special Purpose Transfer Pipettes are optimal for dispensing droplets of samples onto tiles or slides. This pipet's single-unit design features a built-in pipette bulb.

Save precious time and gain efficiency in the lab with the OLA2500 Lab Automation System (LAS), the  (more)high-throughput aliquotting solution with pre- and post-analytical sample-processing capabilities. The Olympus OLA2500 LAS is an advanced modular automation system designed for medium- to high-volume laboratories. As a front-end sample-processor the OLA2500 LAS automates sample aliquotting – saving time, labor, and eliminating sample handling errors. The system also selectively decaps and sorts tubes to any analyzer sample rack. The Olympus OLA2500 LAS is a Olympus Lab Automation solution to increase productivity and efficiency in medium- to high-volume laboratories. It automates labor-intensive tasks such as sample identification, decapping, aliquotting, out sorting, and archive preparation of sample tubes. Typical aliquotting throughput of up to 650 total tubes per hour and sorting throughput of up to 800 tubes per hour to reduce your sample preparation for better test turn-around time Minimize your staff’s biohazard exposure, reduce errors, and reduce repetitive motion injuries associated with manual sample-processing User-defined applications for aliquotting priority, sorting, decapping, and archiving. Identifies sample tube size, cap type and color, and sample volume using an on board digital image analysis system Processes most primary tubes (including conventional, BD Hemoguard or screw top closures in parallel, foil top closures with optional decapping unit) Builds personality racks for Olympus, Hitachi, Beckman-Coulter and others Automatically generate secondary tubes with user defined barcode labels No carryover with disposable, conductive aliquot tips Clot detection to ensure valid sample distribution Prioritized aliquotting when there is insufficient amount of sample in the primary tube Load up to as many as 300 samples in the input area Sort to any number of user defined sorting targets with up to 1,080 tube capacity at the destination area Holds bulk on-board consumable inventory Sort and speed primary and/or secondary samples to workstations in specific analyzer racks Access samples without interrupting the instrument with electronically controlled drawer bays Sorts primary and secondary sample tubes at high speeds to meet peak load demands Archive samples in parallel with sorting or separately in batch User defined sorting areas that accommodates any analyzer sample rack Reduces the number of “problem tubes” at the analytical workstations by sorting out the tubes with bar code label, test order and decapping problems Decap screw cap and conventional rubber closures in parallel with a standard decapper; an optional decapper handles foil top closures

Max RPM 5300 Max. RCF: 2,600 x g Volume 12 x 15 ML Programs: Last entered values are saved Timer swi (more)tch1 – 99 min and continuous use Weight (kg) 10.7 B × D × H: 284 × 375 × 240mm Features and benefits: Bright digital displays and touch-pad keys provide quick and easy speed and run-time adjustment. START key repetitions runs. User-friendly self-diagnosis gives errors on the display. Brushless motor is virtually maintenance-free and ensures clean working conditions. Safety: Includes lid lock, lid interlock and steel armored ring Meets international safety standards Accessories: Centrifuge comes standard with an autoclave Heraeus 3760 rotor made of impact-resistant glass fiber reinforced polyamide, which offers high stability and excellent run characteristics

The BioTherm BioOven III features a rotating sample carousel that exposes all samples to a uniform t (more)emperature. The Bio Oven III can accommodate up to 8 96-well plates and has a menu-driven controller. Users can write and store procedures or input the sample type and use the BioTherm pre-pre-programed optimized run. Users can set sample and target temperature, current cycle count, and experiment timers. The BioTherm Bio Oven III has memory space for up to 99 program profiles. Maximum temperature: 99.9°C Temperature ramp: 0.1 – 2.0°C/S

For decades, the ROTOFIX 32 A has set the standard in daily lab routine thanks to its versatility an (more)d solid construction. The benchtop centrifuge spins sample volumes up to 6 x 94 ml, 40 blood collection tubes or 8 x 50 ml conical tubes with a simple user interface. Hettich’s cytology rotors are compatible with most existing funnel/slide systems and have bio-containment lids. Equipped with: 1x Hettich 1624 swing out rotor (max 4000 rpm) 4x Hettich 1481 Carrier bucket 4x Hettich 1347 15 ml insert Max. RCF: 4,226 Max. RPM: 6,000 Dimensions (H x W x D): 257 x 366 x 430 mm Weight: approx. 23 kg

Optical iris diaphragm for night vision goggles, scopes, microscopes, and other opto-mechanical uses (more). It has an aperture range of 1.5mm to 24 mm [¹/₁₆ - ¹⁵/₁₆"], and an outside diameter of 37 mm [1 ²⁹/₆₄"]. Specifications Aperture: 1.5 - 24 mm [¹/₁₆ - ¹⁵/₁₆"] Outside diameter: 37 mm [1 ²⁹/₆₄"] Thickness: 8 mm [⁵/₁₆"] Leaves: 12 Handle rotation: ~90° Colour: Black Material: PLA plastic (3D printed) If you need an adapter, or other modifications, please do reach out!

Design and make an iris diaphragm, effortlessly! 1 year access to our online design software tool, f (more)or helping design and make mechanical iris diaphragm apertures quickly and precisely. Iris Calculator enables you to instantly determine the feasibility of an iris diaphragm design. By eliminating all the work involved in creating CAD or vector drawings of the mechanism, you can alter and refine your design on the fly - safe in the knowledge that each iteration will function perfectly. Dimensions for the blade array geometry, actuator ring, and housing are all calculated in software from the the initial dimensions you specify - along with minimum and maximum apertures - allowing you to review your design and components with ease. Simply enter any dimensions you know and the rest will be calculated for you! Features Rapidly assess design solutions, then export the DXF iris template for use in your CAD or vector application. React quicker, and more efficiently when designing custom-sized iris diaphragms. - Interactive animated iris design - Component layer visibility - DXF file export - Dynamically drawn with dimensions - Mathematically solved design - Software powered by industry tested design engine - Rotational movement calculated Learn more at iris-calculator.com

High quality flow timer; Suited for various industrial cup sizes and brands (ASTM-, DIN, ISO, AFNOR  (more)& FORD cups) Optical / contact-less fluid detector; Fast response time, accurate, reproducible; Automatic start & stop with drip detection; Dynamic light compensation; 0-199.9s @0.1s resolution; 200-999s @1s resolution; Flow time comparison with previous measurement (press button again when activated); Automatic shut down after 5 minutes of inactivity; Available in multiple colours.

With the humidity generators and controllers of the HGC series the relative humidity can be controll (more)ed inside of small measuring chambers.

The CryoHolder is a unique tool on the market that helps you move frozen cryovials faster, safer and (more) easier. It's very intuitive, enabling you to precisely move the desired vial without the risk of frostbite or the risk of dropping the vial.

Velp refrigerator-thermostat of 169L net that guarantees excellent connectivity and high performance (more) in temperature control. Auto-Tuning thermoregulation system and transparent internal door that allows visual inspection of the contents with LED shelves for crops and fermentation studies and small growth chamber. - Adjustable temperature: from 3°C to 50°C; stability +/- 0.5°C - 169 liter capacity - Equipped with premium Wi-Fi connectivity to VELP Ermes Cloud Platform - Wireless management via TEMPSoft ™ software (optional) - Accepts up to 4 VELP breathing systems Follow the link for more information: https://jointlab.com/gb/refrigerated-thermostat-and-incubator/324-illuminated-incubator-foc-200il-velp.html

This is a portable pumping system to be used directly with cell culture inside microfluidic chips or (more) organ-on-a-chip devices. After filling the 4x fresh reservoirs of 15 ml tubes are pumped inside microfluidics. 4x piezo micropumps are used and its flow rate and flow on/off time are arranged by cell phone application via Bluetooth. The kit contains piezo pumps and controllers, metal base, 15 ml tube covers, tubings, android application, and power cable and adaptor.

This is a kit of microencapsulation generators to be used directly droplet and microparticle formati (more)on by water and oil phases. The kit contains a syringe pump, droplet generation microfluidic chips, fitting/holders, tubing, and collector.

This is a kit of tissue chip (or organ-on-a-chip) studies to be used directly for tissue emulating e (more)xperiments. It is a blank platform and needs cells and mediums to be supplied by researchers. The kit contains a peristaltic pump, tissue chips (5 pieces with customer selection option), fitting/holders, and tubings.

This is a kit of nanosponge nano/micro-particle synthesis reactions to be used directly with beta-cy (more)clodextrin and crossing chemicals. The kit contains a syringe pump, nanosponge synthesis microfluidic chip, fitting/holders, tubing, glass beaker.