General laboratory equipment

Coherent Sapphire 488-200 CDRH Laser with CDRH HP Controller This was removed from a university lab  (more)where it was surplus to requirements. Both units power up and the laser beam is working. It was tested with a cable from another unit. It is not included. It is in good cosmetic condition with only minor marks from use. Controller:-Model - Sapphire CDRH HPPart no. 1142958 REV AB Laser head:-Model - Sapphire 488-200 CDRH

This Binder CB150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to (more) requirements. The system has been professionally serviced and is in full working order. A full report is available on request. It is in good cosmetic condition with minor marks. The trolley it sits on is not included.

This Bellco Biotechnology Cell Production Roller Apparatus was removed from a university lab where i (more)t was surplus to requirements. The unit powers up and runs up to 4000rpm. It is in good working order, and has had a brand new dial fitted. It is in good cosmetic condition with minor marks from use. 9 x Roller levels/shelves The motor was replaced on 13/12/19

Coherent Sapphire Laser 488-200 CDRH with CDRH HP Controller This was removed from a university lab (more) where it was surplus to requirements. Both units power on with the laser beam working. It was tested with a spare cable from another laser which is not included. It is in good cosmetic condition with some minor marks from use. Controller:-Model - Sapphire CDRH HPPart no. 1100969 Rev. AE Laser head:-Model - Sapphire 488-200 CDRH

This Thermo Scientific VersaCool Refrigerated Circulating Water Bath was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and is in very good cosmetic condition. It was tested with a digital thermometer (not included). Heating:-Tested with water, the temperature was set to 37˚c, the temperature quickly went up to 38˚c while the thermometer read 37˚c. It was then tested up to the maximum temperature (for water) of 90˚c which it reached after around 10 minutes, thermometer also read 90˚c. It can go higher but we didn't want it to boil. It is rated for 150˚C. Cooling:-Tested with Antifreeze, the temperature was set to -20˚c, it dropped quite quickly to -8˚c but seemed to stop cooling from there, only dropping a further 0.3˚c over the next few hours. The thermometer read -9.6˚c. This is likely due to the concentration of antifreeze used.

This Kendro Heraeus Multifuge 3 S-R Benchtop Centrifuge was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in good working order. (Digital thermometer not included). It is in good cosmetic condition but has some marks from age and use. Rotor - Heraeus 6445Max 4600rpm4 x Sorvalll Heraeus Buckets (75006441)4 x Green Adaptors (6496) Holds 5 x 50ml each4 x Sorvall Heraeus Bucket lids (75006421)

Matrix Technologies PlateMate 2x2 Automated Pipetting Workstation This was removed from a university (more) lab where it was surplus to requirements. The unit powers up and goes through all start-up sequences. It is in good cosmetic condition with minor marks. It is fitted with a pipette head with 96 tips at 300µl.

Motic AE21 Series Trinocular Inverted Microscope with 4x Objectives This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and is in very good, used cosmetic condition. The microscope has been tested with one of our slides and is working well and is clear. On the microscope are the following modules; 1x N.A. 0.30 condenser (WD 72mm) with halogen illumination 6v/30w. 1x Centerable PH slider supplied with phase ring PH 1 2 x Eyepieces - W10x/20 4 x Objectives: 1x Motic E Plan LWD PH 40x/0.60 ∞/1.1 WD 2.11x Motic E Plan LWD PH 20x/0.40 ∞/1.1 WD 5.51x Motic E Plan PH 10x/0.25 ∞/1.1 WD 6.31x Motic E Plan 4x/0.10 ∞/1.1 WD 14.2

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr) This item was removed from a univers (more)ity where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LPN3/2051Serial No. 1616Manufactured 30.06.16Output 2051 KW/hr 7.0 MBtu/hr Dungs gas train valve: FRS 5065 gas regulator, VPS 504 leak detector, GF 40065/3 filter Caldaia A Condensazione control box with probes and a programmable thermostat to control the boiler at lower temperatures. With Autoflame Combustion Management SystemPart Nos. MM10005, MM10004 Serial Nos. 21549, 53299 TEC 5.5KW 415 volt fan motor Type 5.523TECAB35-IE3 T3A 13251-22.5" gas inlet pipe

This Carbolite Laboratory Furnace Model - VCF 12/23 was removed from a university lab where it  (more)was surplus to requirements. The unit was fitted with a 32 amp plug (not included). It is in full working order. It has been tested and fitted with a replacement temperature controller by an engineer. It is in reasonable cosmetic condition but has some dents.

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)is in good working order. (Digital thermometer used for testing and is not included). It is in good cosmetic condition with minor marks.

NesLab CFT-75 Refrigerated Recirculator Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition and powers on. It is in good working order.

This Olympus BX40F-3 Microscope was removed from a university lab where it was surplus to requiremen (more)ts. The unit is in reasonable used cosmetic condition but it does have various marks, scratches and signs of general use. The lamp adjustment slider is snapped off but it can still be operated if you put something thin in the hole(ie small flat screwdriver). Please let us know if this is a major problem for you - we may be able to complete a repair or source a replacement. The microscope has been tested using one of our slides and it appears to work well with all fitted objectives. The system consists of: 1 x Olympus BX40F-3 Microscope body.1 x Olympus U-RLA Reflected Light Vertical Illuminator.1 x Olympus U-SVRS Mechanical Stage.1 x Olympus U-AC Brightfield Condensor.1 x Olympus U-TRU Side Camera Port.1 x Olympus U-TR30 Trinocular Head.1 x Olympus U-TVO.5XC-2 Camera Adapter.1 x Olympus U-SPT Phototube fitted with 1 x Olympus Japan PE 3.3X 125 Objective.1 x Olympus U-PMTVC Camera Adapter.1 x Olympus U-LS30-4 Lamp (new bulb fitted). 1 x Vantage Camera.1 x Q Imaging QICam UV Fast Camera. Both cameras are untested. Microscope has the following 4 objectives fitted: 1 x Olympus Japan 103250 IC10MSPlan100.30∞/- f = 180 1 x Olympus Japan T4-100580 IC20MSPlan200,46∞/0 f=180 1 x Olympus Japan 100DPlan Apo100UV1.30 oil160/0.17 1 x Olympus Japan IC150MDPlan 1500.95∞/0 f=180 It is also fitted with a pair of Olympus WH10X/22 eyepieces.

MC-80 Water Cooling Manual Metallographic Cutting Machine w/ Stand This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and is in good working order. It is in reasonable cosmetic condition for this type of equipment, though it has been well used. It has a 16amp 5 pin 3phase plug fitted.

Julabo F25-ED Refrigerated/Heating Circulator Water Bath This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up and is in good working order. The digital thermometer was used for testing only and is not included. It is in good cosmetic condition with minor marks.

Thermo Scientific Catalyst Express C500D Robotic Arm This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and was in good working order in manual mode, but there is no software included to operate it further. It is in good cosmetic condition with minor marks. Base Model: Catalyst Express F01229Base Serial#: RCE1006363Base Date: 2010 Arm Model: Catalyst-5 Robot Arm F01064Arm Serial#: RA51006712Base Date: 2010

Metrohm 831 KF Coulometer System with Keypad, Magnetic Stirrer and Accessories This was removed from (more) a university lab where it was surplus to requirements. The system powers on and main Coulometer self tests, keypad communicates with main unit and magnetic stirrer operates as demanded. The dosing pump was seen to be turning and suction could be heard. Included are; Metrohm K831 KF Coulometer Type 2.831.0 Serial No. 06168Metrohm Magnetic Stirrer with stand Type 1.728.0010 Serial No. 57170Metrohm Keypad Type 6.2130.090Metrohm 700 Dosino 50ml dosing pump with glass bottleMetrohm Bottle Stand Type 6.2055.1003 x 1 litre glass bottles

Stratasys Objet30 V2 Pro Desktop 3D Printer With Software Lab This item was removed from a universit (more)y where it was surplus to requirement. It is in excellent cosmetic condition and powers on, the previous client reported it was fully functional when last used and was flushed of its resin. Also included are the following: - 1 x Objet30 Software and Drivers SET-2400: - 1 x Objet30 Printer Ver. 30.2.1.5896 - 1 x Objet24/30 Studio Ver. 8.5.9.3 - 1 x Machine Parameters SWR-500 - 1 x Objet24/30 Image Disk Ver. 2.0 - 1 x full user manual - 1 x Aten Masterview KVMP Switch Model CS-1732A Serial No. Z3D2P108BF0222 - 1 x Adaptor VGa to DVI Part No. 10032003 - 5 x Data leads - 2 x Wiper blades Part No. 04280 - 1 x Loupe Magnification x10 Part MSC-00086 - 1 x Waste cape Part MSC-00063 - 2 x Scrapers

Wheaton Roller Incubator 1133Ltr 1057606-D with Roller Apparatus This was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer. It is in good working order. The internal sizes are 89cm (L) x 66cm (W) x 192cm (H). There are 4 power sockets fitted to the rear wall and a bag clips for the fixing of shelfs, but no shelving supplied.

Forma Scientific 958 Ultra Low Temperature Chest Freezer ULT This item was removed from a university (more) where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in reasonably good cosmetic condition internally and externally.

This Jouan SA GR 20 22 Centrifuge was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up and has been temperature tested, and speed tested to 7470rpm. It is in good working order. Fitted Rotor - AE 3066 02/94 2.00The rotor holds 6 x Adaptors, the diameter of the holes is 60mm. It is in good cosmetic condition with marks from use. Also includes: 1x Box of assorted fixed angle and swing buckets with no markings - various sizes of test tube adaptors. 1x Juan AG 290.G Swing Bucket Rotor 4x Juan Swing BucketsC/N: 11174649S/N: 0102/03 4x 125 ml Tube Adaptors

This item has just arrived in our stock. Please enquire for further details.

This Sanyo Laboratory Incubator Model - MIR-154 was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. Inside dimensions - L33 x W62 x H50cm2 Shelves 60 x 31cm Everything is in reasonably good cosmetic condition with marks from use.

Thermo Fisher Scientific TSX2320FV Laboratory Freezer Lab This item was removed from a university la (more)b where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in great cosmetic condition. Key included.

Thermo Scientific TSX2305SV Laboratory Refrigerator Lab This item was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in great cosmetic condition. Key included.

This was removed from a university lab where it was surplus to requirements. The unit has not been t (more)ested. It is in good cosmetic condition with marks from use. Part no. 5-2437-00

The unit was removed from a university lab. It has not been tested at our facility. This job lot of  (more)items comes from a university lab, The items were no longer required. None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; Enraf Nonius Goniometer Control UnitType 0590.821Serial No. 042 Enraf Nonius main processing unitType 1546.801Serial No. 19-19 Jobin Yvon Horiba PC without HDD Bruker Nonius X-Ray ControlType 1590.830Serial 24-04 Enraf Nonius Delft x-ray station with Thomson Tubes X-Ray Head Enraf Nonius Pocket TerminalSerial No. 69786R 2 x Huber mechanical adjusting blocksPart Nos. D83253 D8219 4 x Software disks Cad4- PC Software V1.5c 3.5 Connecting cables and data leads

Binder CO2 Incubator CB 160 Lab This item was removed from a university where it was surplus to requ (more)irement. The system has been professionally serviced and is in full working order. A report is available on request. Requires CO2 connection fitted. It is in great cosmetic condition. 2 x Shelf (60x60cm)

This system was removed from a university lab as surplus to requirements. The lab reported: "Hasn’t  (more)been used for a few years. I am told it was working fine last time. " Genomic Solutions Cartesian Dispensing System ,Honeybee SD 8+1 Active. Model 6PCSDBXL-00. The system in the perspex enclosure was in good working order prior to it being disconnected. There is also included a spare unit which the university was using to provide spare parts. There are eight tube rails each holding 24 tubes. There are two Dell GX520 PC's that both have Microsoft XP pro installed and the software for the honeybee installed. There are no personal data on either of the units and all passwords and usernames have been changed on both. A HP 1702 monitor, usb keyboard and mouse are also included. It also comes with instruction books and a CD-Rom of software with Cartesian AXSYS V81.6.2. Included are the following; Model Honeybee 8+1 Active (complete)Serial No. H2755 Model Honeybee 8+1 Passive (incomplete)Serial No. HSD2756 2 x Dell Optiplex GX520 PCs running Windows XP ProfessionalSerial Nos. JQBJOB1. BBVD891 HP 1702 17" monitor Serial No. CNN407072Y Dell keyboard RT7D50 Serial No. CN-OW7658-37172-58O-08FI Passed a PAT test on 10.06.24The Honeybee unit powered on with power indicator lights showing on the main panel and injection head.A small vacuum pump powered on and generated suction.The first PC powered on but would not boot up properly, the second booted up and loaded windows and showed the software icons.When the icons were selected attempts were made to communicate with the Honeybee hardware but were not successful.The com cables reconnected into different ports but the data link could not be made. Software:Genomic Solutions AxSys Ver 81.6.2 November 2005 Manuals:3 x Genomic Solutions Training Guide V4 May 20061 x Genomic Systems Cartesian Honeybee Bench-top Protein Crystallisation System Operating Manual Version 1.0 January 2003 Included:8 x 24 position tube holders1 x barcode reader1 x small vacuum pump1 x Dell mouse5 x data cables

This Thermo Finnigan Trace GC System was removed from a university laboratory where it was surplus t (more)o requirements. All the units are in good, used cosmetic condition, and all power up. We were unable to test them further than this, however. The system comes supplied without a detector. The ECD one that was inside has been retained by the lab. The system consists of: 1 x Finnigan Trace GC Ultra With TriPlus AS Autosampler.1 x Thermo TP100 Sampler Supply It also comes with some spares and cables.