Scilogex D3024 Micro-Centrifuge w/ 24 Place 1.5/2.0ml Bio-Safe Aluminum Rotor

Manufacturer: Beckman Coulter Model: J-26S XP BioSafe Three-Phase Description: The J-26S X sets the  (more)standard for performance, including high speed, low heat dissipation, imbalance tolerance and low noise level, and its wide range of separation capabilities is extended even further, now including three-phase filtration that further separates airlock material into solids, liquids and gases. The addition of a High Efficiency Particle Arrestance (HEPA) filter set makes the unit bio-safe. The J-26S XP centrifuge features a more impact-resistant lid, full containment barrier and automatic rotor detection. The ergonomic design - with lower unit height and hands-free door operation - remains unchanged. The J-265 XP can process six liters of fermentor output in less than 10 minutes, deliver a subcellular fraction at 82,000 x g, and run 24 microplates simultaneously. The unit automatically detects which rotor is installed and prevents the rotor from exceeding its maximum speed. It enables faster, quieter and more energy-efficient operation with better temperature control. The exclusive, high-torque SR (Switched Reluctance) drive reduces cycle times. Core features: - Processing six liters of digester output in less than 10 minutes. - Deliver a subcellular fraction at 82,000 x g - Run 24 microplates at once - Separate live cell populations with elutriation - Sterile filters prevent the escape of infectious material Specifications: Maximum speed: 26,000 rpm Acceleration: Maximum, slow or timed (1-10 minutes, 0-500 rpm). Deceleration: Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off Maximum capacity volume range: 1 - 6 L Refrigeration system: CFC-free, non-ozone depleting refrigerant Temperature range(s): 10°C - 40°C in 1 degree increments Weight: 290kg Dimensions (W x H x D): 71cm x 86cm x 86cm Power requirements: 220/380 VAC, 50 Hz, 3 phases Humidity restrictions:< 95% (non-condensing) Scope of delivery: - J-26S XP BioSafe Three-Phase without rotor - Instruction manual as PDF via e-mail If you need a suitable rotor, we are happy to help! The unit is in absolute top condition and has been 100% function tested.

The Frontier 5306 minimizes noise and interruptions in the laboratory: low input voltage power, sile (more)nt brushless motor and a rubber base that absorbs vibrations. Operator safety: rotor imbalance sensor and two safety switches that immediately stop the rotors if the lid remains open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without pressing any buttons. Operation AC power (included) Structure Silent brushless motor, small footprint Construction features Easy to install design Technical features Speed ​​range: 0 rpm – 6.000 rpm Maximum relative centrifugal force: 2.000 g Maximum flow rate (rotor): 8 x 1,5/2,0 ml Program memories: 0 Acceleration gear: 1 Deceleration gear: 2 Lid lock: mechanic Noise level: ≤60 ± 2 dB (A) Rotor Compatibility: Angled 8 x 1.5 / 2.0ml; Angled 4 x 8 PCR strips Execution time: continuous Safety certification: CE; FCC; TUV The Ohaus Frontier 5306 minimizes noise and interruptions in the lab: low input voltage power, a quiet brushless motor, and a vibration-absorbing rubber base. Operator safety: rotor imbalance sensor and two safety switches that stop the rotors immediately if the lid is left open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without the need to press any buttons. The KIT includes two rotors, described below. Maximum relative centrifugal force (x g) at 2,560 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 45 mm. Maximum relative centrifugal force (x g) at 2,260 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 32 mm. TECHNICAL FEATURES Speed ​​range: 0rpm – 6,000rpm. Maximum relative centrifugal force: 2,000 g. Maximum flow rate (rotor): 8 x 1.5/2.0ml. Program memories: 0. Rotor Pack: 8 x 1.5ml/2.0ml Angled Rotor; angled rotor 4 x 8 PCR strips. Accelerator gear: 1. Deceleration gear: 2. Screen (2): without display. Lid lock: mechanical. Net weight: 1.1kg. Noise level: ≤60 ±2 dB(A). Rotor Compatibility: Angled 8 x 1.5/2.0ml; angled 4 x 8 PCR strips. Rotor recognition method: not applicable. Runtime: Continuous. Safety Certification: CE; FCC; TUV.

Benchmark C5000-6H-PT Sprint 6H Portable Clinical Centrifuge The Sprint™ 6H Portable kit allows for  (more)mobile processing of clinical applications. The package includes a 6 position swing out rotor for blood tubes, 12V voltage adapter, and adjustable leveling stands to match various car seat angles and ensure balanced centrifugation.Designed for use with 10ml tubes (16 x 100mm), smaller tubes (12 x 75mm and 12 x 100mm) can be centrifuged using the optional adapters (item: C3100-ADP).With intuitive controls and a large LED display, virtually no programming or setup is required prior to starting a cycle. Simply select the run time and press “START”. The safety lid-lock is engaged and the rotor quickly and smoothly accelerates to 3,400 rpm. Once the run time is completed (or the “STOP” button is pressed) the rotor comes to a complete stop and the lid lock is disengaged for removal of samples.INCLUDED: The Benchmark C5000-6H-PT Sprint 6H Portable Clinical Centrifuge includes: - 12V Car adapter - 6 Position swing out rotor - Adjustable leveling stands - Two Year Manufacturer's Warranty

Benchmark MyFuge Mini Centrifuge The MyFuge Mini Centrifuge is a personal centrifuge that virtually  (more)fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, the MyFuge is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples. An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2ml PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge. When the rotor is not in use, storage in this compartment prevents loss or misplacement of the rotor. Click Here to View Product Video INCLUDED: The Benchmark MyFuge Mini Centrifuge includes: - 8-Position Microtube Rotor - PCR Strip Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Spectral range (190 – 850 nm) for measuring a variety of samples types: Peptides (205 nm), DNA and R (more)NA (260 nm), Purified protein (280 nm), Toxicology assays and industrial dyes (490 nm), Gold nanoparticles (520 nm), Colorimetric protein assays (BCA 562 nm, Bradford 595 nm, Modified Lowry 650 nm, Pierce 660 660 nm), Optical Density measurements (600 nm) Light Source: Xenon Flash Wavelength Accuracy: ±1 nm Spectral Bandwidth: ≤1.8 nm (FWHM at Hg 254 nm) Pathlength: 0.030 to 1.0 mm (auto-ranging) Photometric Accuracy: 3% at 0.97 A, 302 nm, (Absorbance expressed at Abs/mm at 25°C) Photometric Range:  0–550 A Repeatability Typical: 0.002 A (1.0 mm path) or 1%CV, whichever is greater (SD of 10 individual measurements at 0.97 A) Sample Volume: Minimum 1μL Measurement Time: 8 seconds Detection Range: dsDNA 2.0 ng/μL, BSA (IgG) 0.06 (0.03) mg/mL Detector Type: 2048-element CMOS Linear Image Sensor Display: 7 in. High Definition Color Display, 1280 x 800 pixels For Use With (Application): Nucleic Acid A260, A260/A280, A260/A230 and Labeled Nucleic Acids;, Protein A280 and A205, Protein Pierce 660, Protein Bradford, Protein BCA, Protein Lowry, Labeled Proteins, OD600, Kinetics, UV-Vis, and Custom Methods Dimensions (DxWxH): 200 x 254 x 323 mm Weight: 3.6 kg

IKA ICC 100 Lite Eco 18 Open Bath Heating Circulator Working temperature Room Temp. to 100°C Capacit (more)y 18 L Temperature Stability DIN 12876 ±0.05 K Features - High-quality compact immersion circulator for efficient operation - PID temperature control for precise and reliable performance - LED displays for both working and safety temperature readings - Optical and acoustic warning functions for added safety - Adjustable safety circuit for secure temperature control - Sub-level protection ensures dependable operation - Lightweight design with compact dimensions for easy storage - Ready-to-connect packages simplify setup and use The IKA ICC 100 Lite Eco 18 Open Bath Heating Circulator is a high-quality, compact solution for achieving precise temperature control in laboratory environments. With advanced PID temperature control, it delivers stability to ±0.05 K, ensuring reliable performance across a working range from room temperature to 100°C. The dual LED displays provide clear and convenient monitoring of both working and safety temperatures, while integrated optical and acoustic warnings enhance operational safety. The adjustable safety circuit, with a range up to 110°C, and sub-level protection ensure secure and dependable operation. Designed for efficiency and ease of use, the ICC 100 Lite Eco is compatible with 18 L baths, making it suitable for a wide range of laboratory applications. Its lightweight and compact design, with dimensions of 5.3 x 11.9 x 7.1 inches and a weight of 9.3 pounds, allows for easy integration into any setup. Built to comply with DIN 12876 standards, this circulator combines precision, safety, and reliability, making it a valuable addition to any laboratory workflow. INCLUDED: The IKA ICC 100 Lite Eco 18 Open Bath Heating Circulator includes: - ICC 100 lite Compact Immersion Circulator - IB 18 eco Plastic Bath - BL.ICC Large Bridge - Screwdriver for Safety Circuit - Power Cord - Operators Manual - Manufacturer's Documentation - Two Year Manufacturer's Warranty

SCILOGEX SCI-UV1000 UV/Vis Spectrophotometer The Scilogex Spectrophotometers are indispensable instr (more)uments routinely used in colleges, universities and research institutes for quantitative analysis in fields including biotechnology and quality control of new material developed. V-Series provides high resolution, high performance and excellent stability.INCLUDED: The SCILOGEX SCI-UV1000 UV/Vis Spectrophotometer includes: - Deuterium Lamp - Tungsten Lamp - 4 Place Cuvette Holder - 4 x 3.5mL Glass Cuvettes - 2 x 3.5mL Quartz Cuvettes - Dust Cover - Power Cord - One Year Manufacturer's Warranty

IKA R 1376 Paddle Stirrer Tangential flow, minimum turbulence, good heat exchange, gentle treatment (more) of product. Used at low to medium speeds.Stirrer Ø: 150 mmShaft Ø: 10 mmShaft length: 550 mm INCLUDED: The IKA R 1376 Paddle Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote