General laboratory equipment

The sensor allows the measurement of size changes in original formulations of suspensions and emulsi (more)ons under inline conditions. Dynamic measuring ranges: < 125 µm Temperature ranges: 5°C to 85°C Pressure ranges: up to 6 bar Diameter of the sensor: 18 mm Sensor length: 100 mm Scanner speed: 1 m/s

QIAcube HT enables automated mid- to high-throughput nucleic acid purification in 96-well format usi (more)ng silica membrane technology. A variety of QIAcube HT Purification Kits lets users quickly and easily purify DNA, RNA and miRNA from almost any type of sample – including cells, tissues and stool samples, as well as from bacteria and viruses in animal samples. Automated protocols and dedicated accessories and consumables increase reliability and convenience and save valuable time. The system provides the same high-quality results as other trusted QIAGEN purification technologies. Reliable DNA, RNA and miRNA extraction from virtually any sample type Mid- to high-throughput solution with dedicated purification kits saves costs and time User-friendly software allows for easy data management and documentation Innovative design features increase safety and minimize cross-contamination Convenient, flexible and easy-to-use instrument with small footprint Accessories: Vacuum Control Station Precision: 20 – 200 µl, less than 4% coefficient of variation HEPA filter: Preinstalled dual-cartridge HEPA filter system provides positive pressure clean air within the closed hood. Communications: RS232 and USB Throughput: 24 – 96 samples in increments of 8 samples UV lamp: Preinstalled UV lamp for worktable decontamination Tip disposal: All used tips ejected externally; no waste accumulation on the worktable Software: Supplied with unlimited user license with free upgrades by web download Pipetting system: 8 pipetting channels, pipetting volume (20-200 µl) Notebook (supplied): QIAcube HT comes with a notebook computer for added flexibility. Table capacity: 4 x SBS positions (127.76 x 85.48 mm), compatible with 96-well plates or tip racks 1 custom adapter for a reagent trough plate compatible to accept reagent troughs vacuum chamber with chambers for waste and elution Dimensions (WxHxD): Instrument 540 x 450 x 630 mm, vacuum control station 495 x 520 x 400 mm Weight: QIAcube HT instrument 41 kg, vacuum control station 19 kg

Seat height: 460 – 600 mm

Maximum capacity: 4 x 100 ml Maximum density: 1.2 kg/dm3 Maximum speed: 6000 RPM Maximum force: 4186 (more) RCF Maximum kinetic energy: 3000 Nm Noise level (dependent on rotor): ≤ 65 dB(A) Dimensions (WxDxH): 368 x 437 x 261 mm Weight: 15.6 kg No rotor included

Temperature range: 12°C to 2°C Gross capacity: 425 liters Usable net content: 303 litres Material: s (more)tainless steel Dimensions (WxDxH): 600 x 731 x 2000 mm Weight: 114 kg

Equipped with a removable shaking platform. Maximum temperature: 100°C Dimensions (WxDxH): 580 x 440 (more) x 450 mm Internal dimensions (WxDxH): 350 x 290 x 230 mm Shake range: 35 – 160 RPM

miVac is a range of centrifugal concentrators capable of removing water and organic solvents from a  (more)variety of sample formats including tubes, microplates and vials. miVac systems are suitable for use with a wide range of solvents, from volatile organic types through to water and many medium boiling point solvents. The system is very simple to use, allowing samples to be safely concentrated or taken to complete dryness. The large clear display enables easy monitoring of time and temperature. The intuitive controls allow inexperienced users to get first-class results, while allowing more sophisticated programming for experienced workers. The simple, robust design ensures years of reliable service even when used intensively, such as in teaching or multi-user laboratories. To improve performance there are built-in special modes for working with water and alcohols. Performance is further enhanced through the use of the miVac SpeedTrap refrigerated condenser. Simplified operation with optimized programs for water, alcohol and other solvents Precise temperature control with timer and digital display up to a max of 60°C Various heating functions (preheating and heating of the interior) Plastic coated aluminum chamber and acrylic glass cover for better chemical resistance The rotors are easily interchangeable Compact systems are quiet when in use and up to 40% faster than comparable machines

Max. Capacity: 24 x 1.5/2.2 ml Max. Speed: 14,800 rpm (min. speed: 200 rpm) Max. g-Force: 16,163 x g (more) Timer: 10 sec. up to 99 min. 59 sec, short and continuous run possible Shortest acceleration time: 13 sec Shortest deceleration time: 11 sec Noise level at max. speed: < 60 dB Dimensions (WxDxH): 212 x 266 x 176 mm Weight: 6.2 kg

Big universal trap for Helium, 1/8 in, 250 psig

Temperature range: Ambient +8°C to 200°C Timer: 0 – 999 mins Volume: 56 liters Forced convection wit (more)h a 4 speed fan Afmetingen (HxBxD): 600 x 600 x 580 mm Interne afmetingen (HxBxD): 360 x 400 x 330 mm

The unit is build as a cell holder and stirrer for Franz diffusion cells, and in the same time as te (more)mperature conditioned water supply for the Franz cellsin order to keep temperature of the permeation experiments during the run. The temperature conditioned water is coming from an external heater-circulator with thermostat (not included). Cell orifice diameter: 15 mm (+0.5 mm, typically within +0.3 mm) Cell volume: 7 mL (+0.5 mL of stated, typically within + 0.3 mL) Stirring: 500 rpm Dimensions (WxDxH): 457 x 203 x 184 mm Weight: 8.96 kg

Temperature range: +7°C to 85°C Speed: 3 – 4 rpm (± 1) Max No. of Tubes: 3 large 80 mm tubes (2 incl (more)uded) Dimensions (DxWxH): 555 x 325 x 375 mm Internal Dimensions (DxWxH): 320 x 270 x 250 mm

Heavy duty large footprint Orbital-Genie provides a flat platform with adhering rubber mat perfect f (more)or use with open containers and T-flasks. Patented material is naturally adhering. Programmable ramping feature ensures a smooth ramp-up to desired speed avoiding potential spills. Speed: 10 – 300 RPM Timer: 1 min – 99 hours w/Alarm or Continuous Orbit: 35mm Selectable Ramp Rates: 10 – 100 rpm/sec Product Weight: 21 kg Dimensions platform: 460 x 460 mm

The search for unknown mutations in genomic DNA is important for studying the genetic basis of disea (more)ses and disorders, including cancer. Additionally, examining DNA polymorphisms is useful for ecological and evolutionary studies of terrestrial, marine, and microbial organisms, with applications ranging from species identification to delineation of population structure to monitoring genetic diversity. The DCode universal mutation detection system can scan for single-base changes by any of the following electrophoretic techniques: Single-stranded conformation polymorphism (SSCP) Denaturing gradient gel electrophoresis (DGGE) Constant denaturing gel electrophoresis (CDGE) Temporal temperature gradient gel electrophoresis (TTGE) Flexible and powerful, the DCode system is the one electrophoresis system that can perform any combination of these techniques. At the center of the system is the temperature control module (which includes a microprocessor-controlled heater, a buffer-recirculating pump, and a stirrer). For techniques requiring accurate temperature control, such as SSCP and TTGE, the gels are immersed in the buffer, and temperatures are regulated between 5° and 70°C. Any run temperature below ambient can be achieved with the cooling tank used in conjunction with an external laboratory chiller. The DCode system can run 64 samples in as little as 2 hours — a major consideration when you’re screening DNA for sequence variations. You can configure your DCode system to grow as your needs grow. Each system includes a vertical electrophoresis cell and choice of adaptor kits for SSCP, DGGE, and CDGE, as well as for TTGE, a technique codeveloped by Bio-Rad. TTGE has all the benefits of DGGE and CDGE without chemical denaturant gradients. Glass plates: 200 x 200 mm Gel sizes: 160 x 200 mm (maximum two per run) Heater and control: Temperature control (PID type) ±0.5°C variation within gel area, ±0.5°C actual in the range of 45 – 70°C Dimensions (WxDxH): 390 x 200 x 420 mm Weight: 16 kg

Water Specifications:

The solubility index mixer is a precision stirrer. It is intended for use primarily for the determin (more)ation of the solubility of dry milk powder. The stirrer is useful in any application requiring that mixing conditions be accurately repsroduced from one run to another.

The Qubit 3.0 Fluorometer is a benchtop fluorometer that can be used for the quantitation of DNA, RN (more)A, microRNA, and protein using the highly sensitive and accurate fluorescence-based Qubit quantitation assays. Fast and highly accurate quantitation of DNA, RNA, and protein in less than 5 seconds per sample. High levels of accuracy using only 1 – 20 μL of sample, even with very dilute samples. Use of dyes selective for dsDNA, RNA, or protein minimizes the effects of contaminants in the sample. Stores results from up to 1000 samples. Large, state-of-the-art color touch screen for easy workflow navigation. Graphically displays up to 20 data points. Instrument indicates samples that are in the extended range or out of range in the graph, as well as in the simple sample output screen. Saves sample data as a.CSV (comma separated value) file. Exports data to a USB drive or directly to your computer via a USB cable. Allows easy definition and saving of assay preferences. Instrument user interface can be personalized to show only the frequently used assays, to add new assays, including user-defined assays created with the MyQubit software and web tool, and to display in the language of your choice including English, French, Spanish, Italian, German, simplified Chinese and Japanese. Dynamic range: 5 orders of magnitude Processing time: ≤ 5 seconds/sample Light sources: Blue LED (max ~470 nm), Red LED (max ~635 nm) Excitation filters: Blue 430–495 nm, Red 600–645 nm Emission filters: Green 510–580 nm, Red 665–720 nm Detectors: Photodiodes; measurement capability from 300–1000 nm Calibration type: 2- or 3-point standard Tube type: 0.5-mL Real Time PCR (polypropylene) tubes Warm-up time: < 35 seconds

DC 10 Maximum temperature: 100°C Temperature accuracy: ± 0.02 K Maximum pump pressure: 300 mbar Circ (more)ulation capacity: 17 l/min Immersion depth: 85 to 140 mm Motor overload protection: yes Alarm signalling: optical P14 Waterbath material: Modified PPO Maximum temperature: 100°C Opening (WxD): 300 x 190 mm Depth: 160 mm Volume: 14 L Dimensions (WxDxH): 330 x 380 x 360 mm

Temperature range: 4°C to 50°C Digitally adjustable and digitally readable per 0.1°C Equipped with w (more)eek clock Dimensions (WxDxH): 760 x 820 x 2030 mm Internal dimensions (WxDxH): 530 x 650 x 1450 mm

The TCM 3000 is a microprocessor controlled drive unit used in most comment surgery fields e.g. Skin (more) grafting, ENT, Plastic- Neuro- Hand- and Oral / Maxillo facial surgery etc.

The Criterion blotter provides blotting efficiency and flexibility in an easy-to-use unit. It can bl (more)ot 2 Criterion gels or 4 Mini-PROTEAN precast gels, Ready Gel precast gels, or handcast gels.

Dimensions (HxWxD): 2050 x 600 x 520 mm

Weighing table Size: 890x600x600 (HxDxW)

Expanded bed adsorption (EBA) is a single pass operation to recover target molecules such as protein (more)s from crude stock feedstock without prior clarification. In extracellular processes, EBA is effective in capturing molecules from fermentation or cell culture. In intercellular processes with soluble molecules, it is suitable for use with broth from cell lysis or homogenization. Streamline columns are specially designed for use with Streamline adsorbents. Column design incorporates spacial flow distributors and a moveable adaptor. The distributor at the bottom of the column creates the stable fluidized bed required for the technique. The moveable adaptor allows the bed height to be adjusted for elution in sedimented bed mode. Diameter: 25 mm Column cross section: 491 mm2 Tube height: 1000 mm Stand foot print: 430 x 430 mm Sedimented bed height: 150 – 300 mm Sedimented adsorbent volume: 75 – 150 mL Max pressure: 1 bar Operating temperature: 4°C to 40°C Feed application: 200 – 400 cm/h Elution sedimented bed: 50 – 150 cm/h Elution expanded bed: 100 – 300 cm/h Chemicals used with Streamline 100 column: Acetic acid: Concentration – 25%, pH = 1.8; Time/cycle – 3 h Acetone: Concentration – 2%; Time/cycle – 15 min Ammonium sulphate: Concentration – 2 M; Time/cycle – 5 h Ethanol: Concentration – 20%; Time/cycle – 24 months Ethanol: Concentration – 70%; Time/cycle – 1 h Ethanol/Acetic acid: Concentration – 20%/10%; Time/cycle – 3 h Ethylene glycol: Concentration – 50%; Time/cycle – 3h Guanidine-Hydrochloric acid: Concentration – 6 M; Time/cycle – 5 h Glycerol: Concentration – 10%; Time/cycle – 3 h Hydrocloric acid: Concentration – 0.1 M, pH = 1; Time/cycle – 1 h Isopropanol: Concentration – 30%; Time/cycle – 3 h Sodium acetate/Ethanol: Concentration – 0.2 M/20%; Time/cycle – 24 h Sodium chloride: Concentration –  0-3 M; Time/cycle – 3 h Sodium hydroxide: Concentration – 2 M, pH = 14; Time/cycle – 24 h Sodium hydroxide: Concentration – 0.01 M, pH = 12; Time/cycle – 12 months Sodium sulphate: Concentration – 1 M; Time/cycle – 3 h Triton X 100: Concentration – 1%; Time/cycle – 5 h Tween: Concentration – 1%; Time/cycle – 5 h Urea: Concentration – 8 M; Time/cycle – 5 h

The Techne FC-200 Flow Coolers work in conjunction with a Techne thermoregulator. The bath liquid fl (more)ows through the unit which continually extracts heat from the bath fluid by means of the heat exchanger which is built into the unit. Techne FC-200 Flow coolers are designed for use when temperatures down to -20°C are required. 220V / 50-60Hz

Dimensions (HxWxD): 635 x 1100 x 595 mm Internal dimensions (HxWxD): 480 x 1003 x 463 mm Maximum vol (more)ume of the largest individual container: 21 l Maximum load capacity: 360 kg Maximum collection volume: 11 l Weight: 206 kg