Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V

Laboratory muffle furnace LBX 7L / 1200°C - NEW New Equipment Metal frame painted with epoxy resin I (more)nsulation chamber and interior chamber in ceramic fiber LED screen Temperature range: 100-1200°C Resolution: 1°C Internal dimensions: 300 x 200 x 120 mm External dimensions: 785 x 530 x 640 mm Weight: 50Kg Timer function (1 to 9999 min) manual safety lock on the door Light and sound alarm in case of overheating Automatic shutdown of heat emission by opening the door Disconnection of the oven due to thermocouple breakage. 220-240V / 50-60Hz 3000W

BINDER BD-115 incubator / oven with natural convection 100°C Model: BD115 Capacity: 115 liters Tempe (more)rature range: Room temperature plus 5 °C to 100 °C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Tested at 37°C (temperature measured: 35.5°C)

This Carbolite Laboratory Furnace Model - VCF 12/23 was removed from a university lab where it  (more)was surplus to requirements. The unit was fitted with a 32 amp plug (not included). It is in full working order. It has been tested and fitted with a replacement temperature controller by an engineer. It is in reasonable cosmetic condition but has some dents.

Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V Operating Temperature Range 100°C to 1150 (more)°C Max. Temperature Reaching Time ~80 min. Internal Capacity 11.3L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 11.3L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-413 High Performance Muffle Furnace 11.3L, 220V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato FO-300CR Muffle Furnace with Communication Port 7.5L, 115V Operating Temperature Range 100°C (more) to 1150°C Max. Temperature Reaching Time ~70 min. Internal Capacity 7.5L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device Standard 7.5L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-300CR Muffle Furnace with Communication Port 7.5L, 115V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DX-402C Natural Convection Oven 74L, 115V Temperature Range Ambient +5°C to 300°C Temperatur (more)e Distribution Accuracy ± 10°C at 300°C Chamber Volume 72L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-402C Natural Convection Oven 74L, 115V is an economical, high-capacity oven designed for precision heating, featuring a spacious 74L interior. Equipped with a digital PID controller, it offers easy operation with modes like Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven efficiently maintains temperatures from room temperature +5°C to 300°C with an excellent control accuracy of ±1°C and distribution accuracy of ±10°C at 300°C. It reaches its maximum temperature in about 60 minutes. Constructed for durability, it has a stainless-steel interior and an electro-galvanized steel sheet exterior with a melamine resin baking finish. Insulation is provided by glass wool, and heating is achieved with a 1.36 kW iron-chrome wire heater. It includes two exhaust ports, each 33 mm in diameter, located on top, and features microprocessor controlled PID temperature control with digital setting and display, alongside a comprehensive timer. Safety is prioritized with self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker with overcurrent protection. The internal dimensions are 450x410x400mm, and the external dimensions are 550x540x730mm. The oven supports a shelf plate load of 15kg, offering nine shelf rest steps with a 35mm pitch. Weighing approximately 38kg, it is compatible with AC115V 14A and is an ideal choice for users needing a larger, reliable, and easy-to-use convection oven for various applications. INCLUDED: The Yamato DX-402C Natural Convection Oven 74L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Armfield UOP12 Filtration Unit This item was removed from a university where it was surplus to requi (more)rements. It is in good cosmetic condition and powers on, during testing we were unable to test the pump and other onboard features. Therefore, it is listed as Spares/Repair. Specifications: - Model: UOP12

IKA C 6000 Automated Calorimeter Global Standards Package 2/10 Measuring Range Max. 40000 J Reproduc (more)ibility Dynamic (1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Automatic ignition and ignition energy determination - Automatic water filling and draining - Automatic oxygen filling, venting and flushing - RFID technology for automatic decomposition vessel identification - New design of the decomposition vessel allowing easier and faster sample preparation - Easy and convenient capacitive touch screen operation - Control chart view and correction calculation of globally used standards - Ethernet interface to connect a network printer - USB interface allowing easy data management and software updates The IKA C 6000 Automated Calorimeter Global Standards Package 2/10 sets a new standard in calorimetry, offering unparalleled automation, precision, and adaptability. Capable of operating in adiabatic, dynamic, and isoperibol modes, it supports three selectable starting temperatures (22°C, 25°C, 30°C) to accommodate diverse laboratory needs. With a maximum measuring range of 40,000 J and exceptional reproducibility (0.05% RSD in adiabatic and isoperibol modes), this instrument complies with leading global standards, including DIN, ISO, ASTM, and GB, ensuring consistent and accurate results. The calorimeter features advanced automation, including automatic ignition, water filling, oxygen management, and degasification, all controlled via a capacitive touchscreen for intuitive operation. RFID technology ensures precise decomposition vessel identification, while the redesigned vessel allows for faster sample preparation and shorter measurement times. Additional functionality, such as control chart views and correction calculations, ensures strict adherence to globally accepted standards. Seamless integration into laboratory workflows is achieved through versatile connectivity options, including Ethernet, RS232, and USB interfaces, enabling effortless data management and compatibility with LIMS systems. While the RC 2 basic chiller is compatible with this system for enhanced temperature control, it is not included in the Package 2/10. Built for rigorous demands, the IKA C 6000 is ideal for laboratories requiring accuracy, automation, and compliance in calorimetry. INCLUDED: The IKA C 6000 Automated Calorimeter Global Standards Package 2/10 includes: - C 6010 Decomposition Vessel, Standard - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Shimadzu RF-10AXL Spectrofluorometer Detector HPLC Lab This item was removed from a university where (more) it was surplus to requirement. The item is in good cosmetic condition and fully operational. However, the Bulb Hours indicator shows 2263 hours, exceeding the recommended replacement interval of 500 hours. Therefore, it is advisable to replace the bulb before using the item.

This Ventana 750-200 Discovery Slide Staining System was removed from a university lab where it was  (more)surplus to requirements. The unit powers up but has not been tested further at our facility. It is in reasonably good cosmetic condition with minor marks. Includes: -Instruction manual-Discovery software manual-Discovery 10X EZ prep solution (expired on 28/12/2017)-RiboWash bulk reagent (expired on 31/12/2008)-Reaction buffer concentrate (10x) (expired on 30/6/2019)-7 x reagent bottle modules for unit-8 x spare reagent bottle modules-Relevant cables-Temperature verifier slides (expired on 30/4/2020) Item is missing waste module

F1 Mass Standard - knob weights, wooden box. Nominal value - 250 kg.

Heidolph Polymax 2040 (10° tilt angle) Wave Platform Shaker With a usable area of390 x 340 mm, the P (more)olymax 2040 is the optimal shaker for increased samplethroughput. Since it can be equipped with a second story, the area can even bedoubled. This model is also offered with two tilt angles, so you can decidewhich option will best fit your needs. INCLUDED: The Heidolph Polymax 2040 (10° tilt angle) Wave Platform Shaker includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 3 Year Manufacturer's Warranty