General laboratory equipment

Edwards nEXT85D NW40 NW16 - 80W Turbomolecular Vacuum Pump Ultimate Vacuum <5x10-9 mbar Inlet Con (more)nection NW40 Pumping Speed Nominal 0.047 m³/s Features - Combines oil-lubricated ceramic and dry permanent magnetic bearings for enhanced durability - Built-in electronics for streamlined operation and easy integration with control systems - Enhances speed and compression efficiency for a wide range of applications - Allows for in-field replacement of oil cartridges and bearings with minimal tools - Offers standard, high light gas compression, and additional regenerative stage options for specific needs - Provides superior compression performance for various gases - Ensures efficient operation with reduced electrical interference - Magnetic bearings reduce noise and vibration, ensuring a stable vacuum environment nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.With nEXT85 and nEXT55 Edwards offers a small and compact turbomolecular pump platform ideal for Analytical Instruments as well as for the R&D market.Features and BenefitsUpper magnetic bearing - ensures clean vacuum, low power and low vibration. Optimised rotor designs - deliver high speeds and high compression. Range of variants suitable for many applications - D = standard nEXT pump variant, H = optimised rotor design for high light gas compression and T = additional regenerative stage for increased compression and higher backing pressure capability Integrated controller / electronics - offers direct I/O or serial control or can be connected to one of our TAG or TIC controllers for easy systemisation. Fully user serviceable - oil cartridge and bearings can be changed in the field with minimal tooling. Inlet screen - supplied as standardINCLUDED: The Edwards nEXT85D NW40 NW16 - 80W Turbomolecular Vacuum Pump includes: - Power Cord - One Year Manufacturer's Warranty

nEXT Pumps Ultimate Vacuum <3.5x10-9 mbar Inlet Connection DN 160 ISO-K Pumping Speed Nominal 4,3 (more)79.99 l/min Features - Delivers fast nitrogen pumping speeds, making it suitable for demanding applications - Designed for R&D, coating, heat treatment, furnace applications, and more - Offers variants for specific needs, including standard, high light gas compression, and regenerative stages - Compatible with TAG and TIC controllers for easy system integration - Allows for field replacement of oil cartridges and bearings with minimal tools - Provides powerful performance in a space-efficient design - Operates efficiently in any orientation, offering versatility in installation - Magnetic bearings reduce vibration, ensuring a stable vacuum environment - Optimized for high-speed and high-compression applications Edwards nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. With the nEXT730 turbomolecular pumps Edwards provides a larger pump offering nitrogen pumping speeds of 730 l/s. INCLUDED: The Edwards nEXT730D - ISO-K160 BP NW25 Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards nEXT730D - CF160 BP NW25 Turbomolecular Pump Ultimate Vacuum <6x10-10 mbar Inlet Connecti (more)on DN 160 CF Pumping Speed Nominal 41,400.00 l/min Features - Delivers fast nitrogen pumping speeds, making it suitable for demanding applications - Designed for R&D, coating, heat treatment, furnace applications, and more - Offers variants for specific needs, including standard, high light gas compression, and regenerative stages - Compatible with TAG and TIC controllers for easy system integration - Allows for field replacement of oil cartridges and bearings with minimal tools - Provides powerful performance in a space-efficient design - Operates efficiently in any orientation, offering versatility in installation - Magnetic bearings reduce vibration, ensuring a stable vacuum environment - Optimized for high-speed and high-compression applications nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.With the nEXT730 turbomolecular pumps Edwards provides a larger pump offering nitrogen pumping speeds of 730 l/s.INCLUDED: The Edwards nEXT730D - CF160 BP NW25 Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards nEXT400T HC - ISO160 160W Turbomolecular Pump Ultimate Vacuum 1x10-8 mbar Inlet Connection D (more)NISO160-K Pumping Speed Nominal 2399.99 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.INCLUDED: The Edwards nEXT300T HC - CF100 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards nEXT400T HC - CF160 160W Turbomolecular Pump Ultimate Vacuum <1x10-10 mbar Inlet Connecti (more)on DN160CF Pumping Speed Nominal 2399.99 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. INCLUDED: The Edwards nEXT400D - CF160 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards nEXT400D - ISO160 160W Turbomolecular Pump Ultimate Vacuum 1x10-8 mbar Inlet Connection DN16 (more)0ISO-K Pumping Speed Nominal 24,000.00 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.Features and Benefits - Upper magnetic bearing - ensures clean vacuum, low power and low vibration. - Optimised rotor designs - deliver high speeds and high compression. - Range of variants suitable for many applications - D = standard nEXT pump variant, H = optimised rotor design for high light gas compression and T = additional regenerative stage for increased compression and higher backing pressure capability - Integrated controller / electronics - offers direct I/O or serial control or can be connected to one of our TAG or TIC controllers for easy systemisation. - Fully user serviceable - oil cartridge and bearings can be changed in the field with minimal tooling. - Inlet screen - supplied as standard INCLUDED: The Edwards nEXT400D - ISO160 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards nEXT400D - CF160 160W Turbomolecular Pump Ultimate Vacuum <1x10-10 mbar Inlet Connection  (more)DN160CF Pumping Speed Nominal 24,000.00 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.Features and Benefits - Upper magnetic bearing - ensures clean vacuum, low power and low vibration. - Optimised rotor designs - deliver high speeds and high compression. - Range of variants suitable for many applications - D = standard nEXT pump variant, H = optimised rotor design for high light gas compression and T = additional regenerative stage for increased compression and higher backing pressure capability - Integrated controller / electronics - offers direct I/O or serial control or can be connected to one of our TAG or TIC controllers for easy systemisation. - Fully user serviceable - oil cartridge and bearings can be changed in the field with minimal tooling. - Inlet screen - supplied as standard INCLUDED: The Edwards nEXT400D - CF160 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards nEXT300T HC - CF100 160W Turbomolecular Pump Ultimate Vacuum <5x10-10 mbar Inlet Connecti (more)on DN100CF Pumping Speed Nominal 1799.99 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. INCLUDED: The Edwards nEXT300T HC - CF100 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards nEXT300D - ISO100 160W Turbomolecular Pump Ultimate Vacuum <6x10-8 mbar Inlet Connection  (more)DN100ISO-K Pumping Speed Nominal 18,000.00 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. INCLUDED: The Edwards nEXT300D - ISO100 160W Turbomolecular Pump includes: - One Year Manufacturer's Warranty

Edwards nEXT300D - CF100 160W Turbomolecular Pump Ultimate Vacuum <5x10-10 mbar Inlet Connection  (more)DN100CF Pumping Speed Nominal 18,000.00 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. INCLUDED: The Edwards nEXT300D - CF100 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards nEXT240T HC - ISO100 160W Turbomolecular Pump Ultimate Vacuum <6x10-8 mbar Inlet Connecti (more)on DN100CF Pumping Speed Nominal 0.240 m³/s Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for improved performance - Offers direct I/O or serial control; compatible with TAG and TIC controllers for system integration - Oil cartridge and bearings can be replaced in the field with minimal tools - Features multiple drag stages for enhanced compression ratios and increased backing pressure tolerance - Suitable for a variety of demanding applications including high-energy physics, electron microscopy and industrial development - Features a patented bearing suspension system to reduce noise and vibration transmission to the vacuum system - Includes a purge port for safe operation with specialized gases - The permanent magnet upper bearing ensures a hydrocarbon-free environment, reducing contamination The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.INCLUDED: The Edwards nEXT240T HC - ISO100 160W Turbomolecular Pump includes: - One Year Manufacturer's Warranty

Edwards nEXT240T HC - CF100 160W Turbomolecular Pump Ultimate Vacuum <5x10-10 mbar Inlet Connecti (more)on DNISO100-K Pumping Speed Nominal 1439.99 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for improved performance - Offers direct I/O or serial control; compatible with TAG and TIC controllers for system integration - Oil cartridge and bearings can be replaced in the field with minimal tools - Features multiple drag stages for enhanced compression ratios and increased backing pressure tolerance - Suitable for a variety of demanding applications including high-energy physics, electron microscopy and industrial development - Features a patented bearing suspension system to reduce noise and vibration transmission to the vacuum system - Includes a purge port for safe operation with specialized gases - The permanent magnet upper bearing ensures a hydrocarbon-free environment, reducing contamination The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.INCLUDED: The Edwards nEXT240T HC - CF100 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards nEXT240D - ISO100 160W Turbomolecular Pump Ultimate Vacuum <6×10⁻⁸ mbar Inlet Connection  (more)DN100ISO-K Peak Pumping Speed (H2) 165 l/s Features - Reaches an ultimate pressure of 6.000 × 10⁻⁸ mbar for precise vacuum applications - Features built-in electronics compatible with TAG and TIC controllers for easy system integration - Allows for in-field servicing with minimal tooling, reducing maintenance time and cost - Upper magnetic bearing ensures clean vacuum conditions, low power consumption, and reduced vibration - Incorporates a molecular drag stage for improved pumping speed and compression ratios - Designed for long-lasting performance and low cost of ownership, enhancing value - Comes with a standard inlet screen to protect the pump and ensure optimal functionality - Offers a high level of modularity for maximum flexibility and customization nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.INCLUDED: The Edwards nEXT240D - ISO100 160W Turbomolecular Pump includes: - One Year Manufacturer's Warranty

Edwards nEXT240D - CF100 160W Turbomolecular Pump Ultimate Vacuum <5x10-10 mbar Inlet Connection  (more)DN100CF Pumping Speed Nominal 14,400.00 l/min Features - Reaches an ultimate pressure of 6×10⁻⁸ mbar for precise vacuum applications - Features built-in electronics compatible with TAG and TIC controllers for easy system integration - Allows for in-field servicing with minimal tooling, reducing maintenance time and cost - Upper magnetic bearing ensures clean vacuum conditions, low power consumption, and reduced vibration - Incorporates a molecular drag stage for improved pumping speed and compression ratios - Designed for long-lasting performance and low cost of ownership, enhancing value - Comes with a standard inlet screen to protect the pump and ensure optimal functionality - Offers a high level of modularity for maximum flexibility and customization nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.INCLUDED: The Edwards nEXT240D - CF100 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards NEXT 300T HC ISO100 160W Turbomolecular Pump Ultimate Vacuum <6x10-8 Inlet Connection DN1 (more)00ISO-K Displacement 25.0 m3h-1 / 14.7 ft3min-1 Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. INCLUDED: The Edwards NEXT 300T HC ISO100 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards mXDS3s Dry Scroll Pump Ultimate Pressure 0.1 mbar (0.075 Torr) Pumping Speed 2.06 CFM (3.5  (more)m^3/h^-1) Inlet Connection DN 16 ISO-KF (NW16) Features - Weighs in at just 17.2 lb. (7.8 kg) and comes with a purpose-made carry handle making it highly portable - Can typically be mounted horizontally or vertically and for convenient connection - Inlet can be orientated vertically or horizontally with a push-fit alternative available as an accessory - Delivers 2.06 CFM (3.5 m^3/h^-1) peak speed at 60Hz and 0.1 mbar ultimate pressure - Gas ballast facility incorporated in the design as standard for water vapour handling and an exhaust valve - Oil-free pump with no oil to top up, replace or dispose of - Optimized fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment - Low maintenance, with tip seal changes required over typically 2 years The Edwards Vacuum range of small dry scroll pumps is expanding with the introduction of the compact mXDS3 and mXDS3s Dry Scroll Pumps. The new mXDS3 dry scroll pump delivers 1.77 CFM (3 m^3/h^-1) pumping speed at 50Hz or 2.06 CFM (3.5 m^3/h^-1) together with an ultimate pressure of 0.1 mbar making it well suited for backing turbomolecular pumps. The mXDS3 is the standard option supplied with no inlet valve fitted, while the mXDS3s comes factory fitted with an inlet valve featuring delay opening. The mXDS3s is also supplied with an exhaust silencer. Both offer the same vacuum performance and feature an IEC connector for main supply and an on/off switch for easy control. This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements. This standard variant of the mXDS3 comes with a single phase 115V, 50/60Hz motor. Click Here to View Product Video INCLUDED: The Edwards mXDS3s Dry Scroll Pump includes: - Inlet Isolation Valve - Exhaust Silencer - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards mXDS3 Dry Scroll Pump Ultimate Pressure 0.1 mbar (0.075 Torr) Pumping Speed 2.06 CFM (3.5 m (more)^3/h^-1) Inlet Connection DN 16 ISO-KF (NW16) Features - Weighs in at just 17.2 lb. (7.8 kg) and comes with a purpose-made carry handle making it highly portable - Can typically be mounted horizontally or vertically and for convenient connection - Inlet can be orientated vertically or horizontally with a push-fit alternative available as an accessory - Delivers 2.06 CFM (3.5 m^3/h^-1) peak speed at 60Hz and 0.1 mbar ultimate pressure - Gas ballast facility incorporated in the design as standard for water vapour handling and an exhaust valve - Oil-free pump with no oil to top up, replace or dispose of - Optimized fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment - Low maintenance, with tip seal changes required over typically 2 years The Edwards Vacuum range of small dry scroll pumps is expanding with the introduction of the compact mXDS3 and mXDS3s Dry Scroll Pumps. The new mXDS3 dry scroll pump delivers 1.77 CFM (3 m^3/h^-1) pumping speed at 50Hz or 2.06 CFM (3.5 m^3/h^-1) together with an ultimate pressure of 0.1 mbar making it well suited for backing turbomolecular pumps. The mXDS3 is the standard option supplied with no inlet valve fitted, while the mXDS3s comes factory fitted with an inlet valve featuring delay opening. The mXDS3s is also supplied with an exhaust silencer. Both offer the same vacuum performance and feature an IEC connector for main supply and an on/off switch for easy control. This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements. This standard variant of the mXDS3 comes with a single phase 115V, 50/60Hz motor. Click Here to View Product Video INCLUDED: The Edwards mXDS3 Dry Scroll Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

ELD500 Max. Measurement <5x10-12 mbar ls-1 Inlet Connection NW25 Helium Pumping Speed 3.1 ls-1 Fe (more)atures - Color touch screen control with local graphical display and audible leak detection - Wireless models allow simultaneous control of up to 10 leak detectors - Low weight and integrated carry handles which allow it to be bench top or trolley mounted - Allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface - Ensured by class leading 180° mass spectrometer The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 WETThe ELD500 WET version uses a small rotary vane backing pump. This is the preferred choice when the unit is operated in an industrial environment and when fast pump down times of large chambers are required.INCLUDED: The Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

ELD500 Max. Measurement < 5x10-12 Cooling Method Forced Fan Max. Inlet Pressure 15 mbar Features  (more)- Color touch screen control with local graphical display and audible leak detection. Wireless models allow simultaneous control of up to 10 leak detectors. - MOBILE SOLUTION - Low weight and integrated carry handles which allow it to be bench top or trolley mounted. - Measurement of leaks for Helium of < 5x10-12 mbar ls-1 in vacuum mode and < 7x10-9 mbar ls-1 in sniffer mode. - ELD500 version with an integrated oil sealed rotary vane pump - ELD500 DRY version with an integrated helium optimised diaphragm pump - ELD500 FLEX version without a primary pump - Partial flow kit allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants. - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface. - Ensured by class leading 180° mass spectrometer. The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 DRYThe ELD500 DRY version uses a small diaphragm backing pump. This is the preferred choice when the ELD500 is operated in very clean processes where contamination needs to be avoided.INCLUDED: The Edwards ELD500 DRY, 100-120V, 60Hz Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

ELD500 Max. Measurement < 5x10-12 Cooling Method Forced Fan Max. Inlet Pressure 15 mbar Features  (more)- Color touch screen control with local graphical display and audible leak detection. Wireless models allow simultaneous control of up to 10 leak detectors. - Low weight and integrated carry handles which allow it to be bench top or trolley mounted. - Measurement of leaks for Helium of < 5x10-12 mbar ls-1 in vacuum mode and < 7x10-9 mbar ls-1 in sniffer mode. - ELD500 version with an integrated oil sealed rotary vane pump - ELD500 DRY version with an integrated helium optimised diaphragm pump - ELD500 FLEX version without a primary pump - Partial flow kit allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants. - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface. - Ensured by class leading 180° mass spectrometer. The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 DRYThe ELD500 DRY version uses a small diaphragm backing pump. This is the preferred choice when the ELD500 is operated in very clean processes where contamination needs to be avoided.INCLUDED: The Edwards ELD500 DRY - 200-240V 50/60Hz Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

ELD500 Max. Measurement < 5x10-12 Cooling Method Forced Fan Max. Inlet Pressure 15 mbar Features  (more)- Color touch screen control with local graphical display and audible leak detection. Wireless models allow simultaneous control of up to 10 leak detectors. - MOBILE SOLUTION - Low weight and integrated carry handles which allow it to be bench top or trolley mounted. - Measurement of leaks for Helium of < 5x10-12 mbar ls-1 in vacuum mode and < 7x10-9 mbar ls-1 in sniffer mode. - ELD500 version with an integrated oil sealed rotary vane pump - ELD500 DRY version with an integrated helium optimised diaphragm pump - ELD500 FLEX version without a primary pump - Partial flow kit allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants. - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface. - Ensured by class leading 180° mass spectrometer. The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 WETThe ELD500 WET version uses a small rotary vane backing pump. This is the preferred choice when the unit is operated in an industrial environment and when fast pump down times of large chambers are required.INCLUDED: The Edwards ELD500 - 200-240V 50/60Hz EU Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector Max. Measurement <5x10-12 mbar ls-1 Inlet  (more)Connection NW25 Helium Pumping Speed 3.1 ls-1 Features - Color touch screen control with local graphical display and audible leak detection - Wireless models allow simultaneous control of up to 10 leak detectors - Low weight and integrated carry handles which allow it to be bench top or trolley mounted - Allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface - Ensured by class leading 180° mass spectrometer The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.The ELD500 WET version uses a small rotary vane backing pump. This is the preferred choice when the unit is operated in an industrial environment and when fast pump down times of large chambers are required.INCLUDED: The Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

Edwards E2M28 Vacuum Pump Ultimate Vacuum 1 x 10-3 mbar / 7.5 x 10-4 Torr Inlet Connection NW25 Fl (more)ange Displacement 38.9 m3h-1 / 22.3 ft 3min-1 Features - Quiet operation ensures a more comfortable working environment, ideal for spaces where noise reduction is crucial. - Features a compact, freestanding design for flexible use across various settings without requiring additional support. - Proven reliable performance in a wide range of laboratory and industrial applications, showcasing its versatility and dependability. - Incorporates a gas ballast valve, essential for effectively pumping vapor without condensation inside the vacuum pump. - Built-in motor protection systems include cooling by an external fan and thermal overload protection that automatically resets. - Maintenance is simplified with an O-ring sealed sight glass for easy monitoring of oil levels and conditions at a glance. - Designed for effortless oil changes, featuring an oil drain port at the end of the oil box for convenient oil removal. - Facilitates easy oil top-ups through a large filling port and a recessed top, minimizing spills and maintenance time. The EM range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor.Click Here to View Product Video INCLUDED: The Edwards E2M28 Rotary Vane Vacuum Pump includes: - Edwards Ultragrade 19 Oil - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ultimate Vacuum 1x10-3 mbar Inlet Connection NW25 Displacement 25.0 m 3h-1 / 14.7 ft 3min-1 Features (more) - High ultimate vacuum and rapid pumping speed make it the industry standard for laboratory and light industrial applications - Quiet operation ensures a comfortable working environment, reducing noise in sensitive areas - Freestanding design with a flexible coupling driven by either a single-phase or three-phase (four pole) air-cooled motor for versatile use - Supplied with essential accessories, including 2 x 1 liter of Ultragrade 19 oil, O-ring and centering ring, two Allen keys, and spare seals for oil drain and filter plugs - Features a pressurized oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces for reliable performance - Includes an oil distribution valve to prevent oil discharge to the pump interior after stopping, enhancing safety - Airtight pumping chambers prevent suckback unless the gas ballast valve is open, maintaining system integrity - Facilitates easy oil changes with an oil drain-plug for gravity or pressure oil drainage Edwards E2M18FX Vacuum Pump 115/230V The EM range of oil sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single phase or three phase (four pole) air cooled motor. Each EM pump is supplied with 2 x 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately. This is a single stage oil sealed rotary vane pump which has a pressurised oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior after the pump stops. The pumping chambers are air-tight, so this arrangement also prevents suckback unless the gas ballast valve is open. You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain. Click Here to View Product Video INCLUDED: The Edwards E2M18FX Vacuum Pump 115/230V includes: - O ring and centering ring - Two Allen keys and spares seal for oil drain and filter plugs - Operator's Manual - 1 Year Manufacturer's Warranty

Edwards E2M18 Vacuum Pump, Cat. #: A36324904 The EM range of oil‑sealed rotary pumps – renowned for  (more)their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor. Please Note: THIS PUMP WILL NOT OPERATE AT 120V or 230V AND IS USUALLY HARDWIRED TO A MASS SPECTROMETER SYSTEM. This pump operates at 100-110V/200-220V and 50/60Hz.Click Here to View Product Video INCLUDED: The Edwards E2M18 Vacuum Pump, Cat. #: A36324904 includes: - 1 Liter of Edwards Ultragrade 19 Oil - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Ultimate Vacuum 1x10-3 mbar Inlet Connection NW25 Displacement 25.0 m3h-1 / 14.7 ft3min-1 Features - (more) High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Freestanding design driven by a flexible coupling with either a single-phase or three-phase (four pole) motor - Achieves excellent vacuum levels, including 1 x 10⁻³ mbar without gas purge and 1.5 x 10⁻¹ mbar with gas purge - Equipped with NW25 inlet connection and a removable 15 mm nozzle outlet, allowing flexible integration into existing systems - Operates efficiently within a temperature range of 13-40°C, accommodating different environmental conditions - Facilitates easy oil changes with a maximum oil capacity of 1.05 liters and a minimum capacity of 0.75 liters - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility Edwards E2M18 Vacuum Pump The EM range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor.Click Here to View Product Video INCLUDED: The Edwards E2M18 Vacuum Pump includes: - 1 Liter of Edwards Ultragrade 19 Oil - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Edwards E2M1.5 Vacuum Pump, 230V Ultimate Vacuum 2.5 x 10-2 mbar Inlet Connection NW10 Displacement  (more)1.8 m3h-1 / 1 ft3min-1 Features - High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Features a pressurized oil system that lubricates pump shaft bearings and rotor sealing faces for reliable performance - Maintenance is simplified with an oil sight-glass for easy monitoring of oil levels and conditions at a glance - Facilitates easy oil changes with an oil drain plug that allows either gravity or pressure oil drainage for convenience - Compact, freestanding design allows flexible use without the need for additional support structures - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility The EM range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor. Click Here to View Product Video INCLUDED: The Edwards E2M1.5 Vacuum Pump, 230V includes: - Edwards Ultragrade Performance 15 Oil - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Edwards E2M1.5 Vacuum Pump Ultimate Vacuum 3 x 10-3 mbar Inlet Connection NW10 Displacement 2.2 m3h- (more)1 / 1.3 ft3min-1 Features - High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Features a pressurized oil system that lubricates pump shaft bearings and rotor sealing faces for reliable performance - Maintenance is simplified with an oil sight-glass for easy monitoring of oil levels and conditions at a glance - Facilitates easy oil changes with an oil drain plug that allows either gravity or pressure oil drainage for convenience - Compact, freestanding design allows flexible use without the need for additional support structures - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility The EM range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor. Click Here to View Product Video INCLUDED: The Edwards E2M1.5 Vacuum Pump includes: - Edwards Ultragrade Performance 15 Oil - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Edwards E2M0.7 Vacuum Pump Ultimate Vacuum 3.0 x 10-3 mbar Inlet Connection NW25 Displacement 38.9 m (more)3h-1 / 22.3 ft 3min-1 Features - High ultimate vacuum and rapid pumping speed make it the industry standard for laboratory and light industrial applications - Quiet operation ensures a comfortable working environment, with noise levels as low as 36 dB(A) with an acoustic enclosure - Freestanding design with a flexible coupling driven by either a single-phase or three-phase (four pole) motor for versatile use - Equipped with an NW10 flange inlet connection and a removable 11 mm nozzle outlet for flexible system integration - Capable of a maximum water vapor pumping rate of 8 g/h, ensuring efficient vapor handling - Nominal rotation speeds of 1400 rpm (50 Hz) and 1700 rpm (60 Hz) offer high performance - Operates within a temperature range of 12 - 40 °C, accommodating various environments The EM range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor. Click Here to View Product Video INCLUDED: The Edwards E2M0.7 Vacuum Pump includes: - Edwards Ultragrade Performance 15 Oil - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Edwards E1M18 Vacuum Pump Ultimate Vacuum < 3x10-2mbar Inlet Connection NW25 Displacement 25.0 m3 (more)h-1 / 14.7 ft3min-1 Features - High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Features a pressurized oil system that lubricates pump shaft bearings and rotor sealing faces for reliable performance - Maintenance is simplified with an oil sight-glass for easy monitoring of oil levels and conditions at a glance - Facilitates easy oil changes with an oil drain plug that allows either gravity or pressure oil drainage for convenience - Compact, freestanding design allows flexible use without the need for additional support structures - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility Edwards E1M18 Vacuum Pump The EM range of oil sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single phase or three phase (four pole) air cooled motor. Each EM pump is supplied with 2 x 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately. This is a single stage oil sealed rotary vane pump which has a pressurised oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior after the pump stops. The pumping chambers are air-tight, so this arrangement also prevents suckback unless the gas ballast valve is open.You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain.Click Here to View Product Video INCLUDED: The Edwards E1M18 Vacuum Pump includes: - 2 Liters of Ultragrade 19 Oil - O ring and centering ring - Two Allen keys and spares seal for oil drain and filter plugs - Operator's Manual - 1 Year Manufacturer's Warranty