Memmert VO29 Vacuum Oven 29L, 230V

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Yamato FP-103 High Performance Muffle Furnace 1.5L, 115V Operating Temperature Range 100°C to 1150° (more)C Max. Temperature Reaching Time ~90 min. Internal Capacity 1.5L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 1.5L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-103 High Performance Muffle Furnace 1.5L, 115V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato ADP-300C Benchtop Vacuum Oven 27L, 115V Operating Temperature Range 40~240°C Operating Pres (more)sure Range 101 - 0.1kPa (760 - 1 Torr) Internal Capacity 27L Features - Easy input of parameters and settings - Digital PID controller supports fixed temperature, quick auto-stop, auto stop, auto start and program operations. - Self-diagnostic and overheating prevention functions - Silicon rubber door seal prevents air from leaking - Independent over heating prevention device for each circuit - Customizable with N₂ gas inlet and communication ports - Calibration off-set function - Easy maintenance Introducing the Yamato ADP Series - a range of versatile laboratory ovens designed to elevate your scientific endeavors. Whether you choose the ADP200C, ADP210C, ADP300C, or ADP310C, you're guaranteed exceptional performance and a host of valuable features. With easy parameter input and settings, our digital PID controller ensures precise temperature control, supporting fixed temperature, quick auto-stop, auto-start, and program operations. Safety is paramount, with self-diagnostic and overheating prevention functions, a silicon rubber door seal to maintain an airtight chamber, and independent overheating prevention devices for each circuit. Customize your oven with N₂ gas inlet and communication ports, and fine-tune settings with the calibration offset function. Maintenance is a breeze, and our safety features include sensor trouble detection, SSR, short circuit detection, heater disconnecting detection, memory error prevention, overheating safeguards, and measurement temperature error detection. Make the right choice for your lab with the Yamato ADP Series.INCLUDED: The Yamato ADP-300C Benchtop Vacuum Oven 27L, 115V includes: - Shelf Plate (3 pcs.) - Power Cord - One Year Manufacturer's Warranty

Memmert UF260 Forced Circulation Oven 256L, 115V Working Temperature Range Min. 10°C above ambient  (more)up to +300°C Oven Type Forced Air Circulation Chamber Volume 256 L (9.04 cu.ft.) Features - Volume of 256 L (9.04 cu.ft.) - Working temperature range from Min 10°C above ambient up to +300°C with a resolution of 0.1°C up to 99.9°C, and 0.5°C from 100°C - Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps, with pre-heated fresh air admixture - Adjustable electronic overtemperature monitor and mechanical temperature limiter for safety - Easy-to-clean stainless steel interior, reinforced with deep drawn ribbing and integrated heating on four sides - AtmoCONTROL software for managing and transferring data via USB or Ethernet interface - Three freely selectable calibration values and digital timer adjustable from 1 minute to 99 days - Fully insulated stainless steel doors with 2-point locking and inner glass doors The Memmert UF260 Forced Circulation Oven 256L, 115V stands as a pinnacle of precision and durability in laboratory ovens. Engineered to maintain a broad setting temperature range from +20 to +300°C and a working temperature range that starts from just 10°C above ambient up to the maximum, this oven meets diverse heating requirements with flawless efficiency. Its high-definition TFT-color display coupled with the ControlCOCKPIT, an adaptive multifunctional digital PID-microprocessor controller, offers unparalleled user control and monitoring, ensuring optimal performance in any lab setting. Safety and usability are at the core of the Memmert UF260 design. It features a robust stainless steel interior that is easy to clean and designed to withstand rigorous use, complete with deep-drawn ribbing and integrated heating on all four sides for uniform temperature distribution. The oven includes a sophisticated air circulation system controlled by a quiet air turbine that can be adjusted in 10% steps, along with a pre-heated fresh air admixture feature. Additionally, comprehensive safety mechanisms, such as an adjustable electronic overtemperature monitor and a mechanical temperature limiter, protect against overheating. The UF260 is not only a testament to Memmert's commitment to quality but also an essential asset for any laboratory requiring reliable and precise thermal processing. INCLUDED: TheMemmert UF260 Forced Circulation Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Thermo Scientific Heraeus CO2 Incubator This item was removed from a university laboratory where it  (more)was surplus to requirements. It powers on, but the display screen does not activate, and an alarm sounds until the unit is turned off. Therefore, it is listed as Spares/Repair. The incubator is in excellent cosmetic condition. Includes:- 3 shelves (47 x 43 cm) - Manuals - Sample holders Model: BB15Serial No.: 40998054Internal dimensions: D51 W47 H60 cm

Flat polygonal sheets - set (1 mg - 500 mg) F2-class mass standards represent an impressive level of (more) precision in mass measurement. Classified as metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 Class Mass Standards – Key Features Exceptional Measurement Precision - F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions - An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level - The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties - F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. The set includes: plastic box 12 mass standards 1 pair of tweezers 1 brush Material: nickel silver *The 1 mg, 2 mg and 5 mg mass standards are made of aluminum. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. Under-Pan Weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Scilogex SCI20-S, Overhead LED Digital Stirrer Bundle, 110-220V Stirring Capacity 20L Viscosity Maxi (more)mum 10,000mPas Speed Range 50 to 2,200 RPM Features - A wide range of speed from 50 to 2200rpm - Brushless DC motor for long life and maintenance free - Analog speed controls displayed on the LED display for monitoring actual speed - High torque for viscous medium stirring - Over torque protection automatically stops the motor - Safety circuits allow for safe stop function in anti-stall or overload condition - A through-shaft design allows for easy adjustment of the impeller position - In the event of power loss, the stirrer will resume stirring at the preset speed when the power returns - Pass through stirrer rods accepted - cTUVus approved for UL and CSA Scilogex overheard stirrers can accomplish the most demanding tasks and provide high safety and increase performance. They are widely used in chemical synthesis, pharmaceutical synthesis, and physical and chemical analysis, as well as petrochemical industries. These products have a high degree of reliability and performance, and are protected by a two year manufacturer’s warranty. INCLUDED: The Scilogex SCI20-S, Overhead LED Digital Stirrer Bundle, 110-220V includes: - 18900071 Stainless Steel Cross Stirrer - 18900131 Stand - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty