General laboratory equipment

Memmert IN110 Natural Convection Incubator 108L, 115V Temperature Range At least 5°C above ambient  (more)to +80°C Convection Type Natural Convection Chamber Volume 108 L Features - 108 L (3.8 cu.ft.) capacity for ample sample accommodation - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - High-resolution display with 0.1°C accuracy for both set point and actual temperature values - Adjustable parameters including temperature (Celsius/Fahrenheit), air flap position, program time, and daylight savings - SetpointWAIT function ensures process time begins only once the set temperature is reached - AtmoCONTROL software allows for data management and program organization via Ethernet - Inner glass door allows for easy sample monitoring without disrupting the internal environment - Autodiagnostic system and adjustable overtemperature monitor for enhanced safety The Memmert IN110 Natural Convection Incubator 108L, 115V is designed for precise and reliable sample incubation in low-temperature applications. With a spacious 108 L (3.8 cu.ft.) capacity, this unit accommodates a wide range of samples and ensures consistent temperature control from at least 5°C above ambient up to +80°C. The high-resolution display provides 0.1°C accuracy for both set points and actual values, allowing precise adjustments. Its adjustable parameters include temperature in Celsius or Fahrenheit, air flap position, and program timing, with a SetpointWAIT function that begins processing only once the set temperature is reached. Enhanced with AtmoCONTROL software for data management, a durable stainless steel interior, and an autodiagnostic system with overtemperature monitoring, this incubator combines efficiency, safety, and ease of use. INCLUDED: The Memmert IN110 Natural Convection Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert ICP750 Refrigerated Forced Circulation Incubator 749L, 115V Setting Temperature Range -12°C (more) to +60°C Setting Accuracy Temperature 0.1 °C Chamber Volume 749 L (26.4 cu. ft.) Features - Temperature range from -12°C to +60°C with optimal performance between +16°C and +34°C - Large capacity of 749 L (26.4 cu. ft.) to accommodate high-volume storage - Equipped with an inner glass door for clear visibility while maintaining chamber integrity - Precise temperature control with 0.1°C setting accuracy and dual Pt100 sensors for mutual monitoring - Energy-saving CFC-free cooling and heating system (R134a refrigerant) with efficient automatic defrosting - TwinDISPLAY control system with dual high-definition TFT displays and multilingual settings - AutoSAFETY system with integrated over- and undertemperature protection to ensure safe operation - Constructed with a durable, corrosion-resistant stainless steel interior and zinc-plated steel housing The Memmert ICP750 Refrigerated Forced Circulation Incubator 749L, 115V offers advanced temperature control within a spacious 749-liter chamber, making it ideal for applications requiring precise cooling and heating cycles. With a temperature range of -12°C to +60°C and optimal performance at ambient temperatures between +16°C and +34°C, this unit accommodates a variety of temperature-sensitive materials. The incubator features an inner glass door, allowing clear visibility while ensuring the integrity of the chamber’s environment. Designed with dual Pt100 temperature sensors in a 4-wire circuit, it provides reliable monitoring and backup functions to maintain accuracy within 0.1°C. Equipped with Memmert’s TwinDISPLAY technology, the ICP750 offers easy adjustments through dual high-definition TFT displays and supports multiple languages. Its energy-efficient, CFC-free cooling and heating system with R134a refrigerant, coupled with an automatic defrost function, ensures optimal temperature management. Safety is prioritized with the integrated AutoSAFETY system, which offers over- and undertemperature protection and visual and acoustic alarms for maximum operational security. Constructed from durable stainless steel with a zinc-plated rear housing, the ICP750 embodies both functionality and resilience, making it a reliable choice for high-demand laboratory environments. INCLUDED: The Memmert ICP750 Refrigerated Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V Setting Temperature Range -12°C (more) to +60°C Setting Accuracy Temperature 0.1 °C Chamber Volume 449 L (15.8 cu. ft.) Features - Setting temperature range from -12°C to +60°C - 449 L capacity for various laboratory applications - Equipped with inner glass door for visibility without compromising insulation - Precision temperature control with 2 Pt100 sensors, accuracy to 0.1°C - ControlCOCKPIT with TwinDISPLAY for easy programming and monitoring - Air jacket heating system ensures gentle and uniform all-around heating - Integrated AutoSAFETY with over- and undertemperature protection - Energy-efficient CFC-free cooling system with automatic defrosting The Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V is designed to deliver precise and reliable temperature control, with a setting range from -12°C to +60°C, making it ideal for sensitive applications that require exact environmental conditions. This 449 L capacity incubator features an inner glass door, allowing for clear visibility while maintaining insulation. TwinDISPLAY technology on the ControlCOCKPIT provides adaptive digital PID-microprocessor control with high-definition TFT-color displays, enabling seamless adjustments of temperature, fan speed, and program settings. With advanced safety features such as AutoSAFETY over- and undertemperature protection, visual and acoustic alarms, and dual Pt100 temperature sensors for accuracy to 0.1°C, the ICP450 offers optimal reliability. Its energy-efficient CFC-free cooling system includes an air jacket heating concept, ensuring gentle and uniform heating throughout the chamber. The incubator is equipped with AtmoCONTROL software for easy programming and data management, making it an exceptional choice for labs requiring consistent and versatile temperature management. INCLUDED: The Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V includes: - 2 Stainless Steel Grids - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert ICP260 Refrigerated Forced Circulation Incubator 256L, 115V Setting Temperature Range -12°C (more) to +60°C Setting Accuracy Temperature 0.1 °C Chamber Volume 256 L (9 cu. ft.) Features - Working temperature range from -12°C to +60°C with optimum performance between +16°C and +34°C - Large 256 L (9 cu. ft.) capacity - Inner glass door provides visibility while maintaining internal conditions - TwinDISPLAY with digital PID-microprocessor controller and high-definition TFT-color displays - Energy-efficient, CFC-free cooling system with automatic defrosting - Precise temperature control with a setting accuracy of 0.1°C - Durable construction with rear zinc-plated steel and stainless steel interior - Comprehensive safety features including AutoSAFETY over- and undertemperature protection The Memmert ICP260 Refrigerated Forced Circulation Incubator 256L, 115V offers precision temperature control within a -12°C to +60°C range, making it ideal for sensitive applications in laboratory settings. This model features a generous 256 L (9 cu. ft.) capacity, with a robust stainless steel interior and an inner glass door, ensuring easy observation without disturbing internal conditions. Equipped with TwinDISPLAY, an adaptive PID-microprocessor controller with high-definition TFT-color screens, the ICP260 provides reliable, intuitive control of temperature, fan speed, program time, and more, with settings in both Celsius and Fahrenheit. The incubator’s air jacket heating system delivers uniform heat distribution while the energy-efficient, CFC-free cooling system with automatic defrosting keeps operations smooth and sustainable. Safety is a priority with built-in AutoSAFETY over- and undertemperature protection, visual and acoustic alarms, and a mechanical temperature limiter that activates if the heating exceeds nominal limits. From its durable zinc-plated housing to its AtmoCONTROL software support for efficient programming and data management, this Memmert incubator combines advanced functionality with user-friendly design, meeting high standards for laboratory applications. INCLUDED: The Memmert ICP260 Refrigerated Forced Circulation Incubator 256L, 115V includes: - 2 Stainless Steel Grids - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert ICP110 Refrigerated Forced Circulation Incubator 108L, 115V Setting Temperature Range -12°C (more) to +60°C Setting Accuracy Temperature 0.1 °C Chamber Volume 108 L (3.8 cu. ft.) Features - Temperature range from -12°C to +60°C, ideal for versatile lab applications - Large 108 L (3.8 cu. ft.) capacity - TwinDISPLAY ControlCOCKPIT with high-definition TFT-color displays for precise control - Equipped with an inner glass door for easy viewing and temperature retention - Air jacket heating system for gentle, all-around heating without drying the load - Energy-saving, CFC-free cooling/heating system with efficient automatic defrosting - Dual Pt100 sensors for mutual monitoring, ensuring stable temperature performance - Adjustable safety features including over- and undertemperature protection The Memmert ICP110 Refrigerated Forced Circulation Incubator 108L, 115V is designed for precise temperature management across a wide range from -12°C to +60°C, making it ideal for sensitive applications in research and industrial labs. With a 108 L (3.8 cu. ft.) capacity, this incubator offers ample space for various sample sizes, and its inner glass door ensures clear visibility without compromising chamber temperature. The advanced TwinDISPLAY ControlCOCKPIT provides easy control through high-definition TFT-color displays, allowing precise adjustments in temperature, fan speed, and program settings. Dual Pt100 sensors monitor and maintain stable temperature performance, even in demanding conditions, by taking over functions in case of a sensor error. Equipped with an air jacket heating system, the ICP110 distributes gentle, even heat, preserving sample integrity without drying out. This unit's CFC-free cooling and heating systems, complemented by automatic defrosting, ensure energy-efficient operation and stable conditions over extended use. Safety is a priority with its AutoSAFETY system, which includes over- and undertemperature protection and audible and visual alarms, providing essential safeguards in temperature-sensitive environments. This robust incubator is mounted on lockable castors for flexible placement and features a textured stainless steel interior and exterior, making it exceptionally durable and easy to clean. INCLUDED: The Memmert ICP110 Refrigerated Forced Circulation Incubator 108L, 115V includes: - 2 Stainless Steel Grids - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert ICO50 CO2 Incubator 56L, 115V Temperature Range Ambient +5°C to 50°C Temperature Uniformity (more) ± 0.3°C at 37°C Chamber Volume 56L (2 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO50 CO2 Incubator 56L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180 °C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO50 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. Further enhancing its functionality, the ICO50 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO50 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO50 CO2 Incubator 56L, 115V includes: - 1 x Stainless Steel Perforarated Shelf - 1 x Stainless Steel Water Tray - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert ICO240 K7 CO2 Incubator w/ Active Humidity Control 241L, 115V Temperature Range Ambient +5° (more)C to 50°C Humidity Control 40 to 97% RH, or no RH Chamber Volume 241L (8.5 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - Allows for direct humidity control from 40 to 97% RH, or no RH - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO240 K7 CO2 Incubator w/ Active Humidity Control 241L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180°C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO240 K7 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. With the K7 active humidity option installed, this CO2 Incubator allows for direct humidity control from 40 to 97% RH, or no RH. Further enhancing its functionality, the ICO240 K7 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO240 K7 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO240 K7 CO2 Incubator w/ Active Humidity Control 241L, 115V includes: - 2 x Stainless Steel Perforarated Shelf - Water Tank - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert ICO240 CO2 Incubator 241L, 115V Temperature Range Ambient +5°C to 50°C Temperature Uniformi (more)ty ± 0.3°C at 37°C Chamber Volume 241L (8.5 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO240 CO2 Incubator 241L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180°C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO240 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. Further enhancing its functionality, the ICO240 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO240 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO240 CO2 Incubator 241L, 115V includes: - 2 x Stainless Steel Perforarated Shelf - 1 x Stainless Steel Water Tray - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V Temperature Range Ambient +5° (more)C to 50°C Humidity Control 40 to 97% RH, or no RH Chamber Volume 156L (5.5 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - Allows for direct humidity control from 40 to 97% RH, or no RH - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180°C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO150 K7 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. Further enhancing its functionality, the ICO150 K7 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO150 K7 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V includes: - 2 x Stainless Steel Perforarated Shelf - Water Tank - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert ICO150 CO2 Incubator 156L, 115V Temperature Range Ambient +5°C to 50°C Temperature Uniformi (more)ty ± 0.3°C at 37°C Chamber Volume 156L (5.5 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO150 CO2 Incubator 156L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180°C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO150 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. Further enhancing its functionality, the ICO150 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO150 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO150 CO2 Incubator 156L, 115V includes: - 2 x Stainless Steel Perforarated Shelf - 1 x Stainless Steel Water Tray - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert ICO105 CO2 Incubator 107L, 115V Temperature Range Ambient +5°C to 50°C Temperature Uniformi (more)ty ± 0.3°C at 37°C Chamber Volume 107L (3.8 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO105 CO2 Incubator 107L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180°C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO105 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. Further enhancing its functionality, the ICO105 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO105 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO105 CO2 Incubator 107L, 115V includes: - 2 x Stainless Steel Perforarated Shelf - 1 x Stainless Steel Water Tray - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Memmert UN30 Natural Convection Oven 32L, 115V Temperature Range Ambient +5°C to 300°C Convection T (more)ype Natural Convection Chamber Volume 32L Features - 32L chamber volume accommodates various sample sizes, enhancing lab versatility - Precise temperature control from +5°C above ambient to 300°C for sensitive applications - Ergonomic PID controller with high-definition TFT display for intuitive adjustments - Durable stainless steel interior and exterior, corrosion-resistant for rigorous use - Natural convection ensures uniform heat distribution for delicate samples - Pre-heated fresh air admixture with adjustable air flap for temperature uniformity - Adaptive settings include programmable temperature, timer, and setpoint wait for workflow optimization - AtmoCONTROL software for data logging and remote monitoring via Ethernet - Easy-to-clean stainless steel interior with reinforced ribbing, ideal for frequent use The Memmert UN30 Natural Convection Oven 32L, 115V delivers precise temperature control from Ambient +5°C to 300°C, making it ideal for a variety of sensitive applications. Featuring an ergonomic digital PID controller with a high-definition TFT display, this oven offers intuitive settings and rapid access to temperature adjustments. Built for rigorous lab environments, its durable stainless steel construction resists corrosion, while the natural convection system ensures even, consistent heating distribution across all samples. Fully adjustable safety controls, including a built-in overtemperature monitor, provide added protection and peace of mind. With an easy-to-clean interior and robust stainless-steel shelving, the UN55 maximizes efficiency in daily operations, delivering reliable performance for years to come. INCLUDED: The Memmert UN30 Natural Convection Oven 32L, 115V includes: - 1 x Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.