Lab Oven SLN 53 POL-EKO

LAUDA ECO Heating thermostat LAUDA ECO stands out for its range of features and ease of use. ECO the (more)rmostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that the regulation of the flow between inside and outside is also possible during operation. - The circulation pump can be adjusted on six levels - The ECO heating thermostats line includes transparent baths up to 100°C and stainless steel baths up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Temperature graphs on display - Convenient operation with softkey cursor - Mini USB interface Performance graph of the pressure pump on the six levels. TECHNICAL VISUALIZATION 1 Light sensor for automatic control of display brightness 2 Monochrome LCD display 3 Control panel (refer to following page) 4 Mains switch 5 Selector switch for dividing up the external and internal pump flow 6 Pump output for internal bath circulation 7 Pump output for bath circulation or connection to the pump connection set 8 Pt100 temperature sensor 9 Heater Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead

HACH LANGE LT 200 DCO heating block Model: LTG082.01.23002 LT200 Temperature: 37 to 150°C per 1°C Ti (more)me: 0-480 mins Heating: from 20°C to 150°C in 10 minutes Stability: +/-1°C Dimensions HxWxD: 145x250x310 mm Power supply: 220 V - 50/60 Hz - 600 VA Safety: maximum insulation, transparent protective cover locks, audible signal at end of program For 30 Ø13mm tubes Equipment tested at 120°C

Hellma 6030-OG macro cell, 20 mm path length 2 packs of 2 Cuvette type: Macro-Cuvette Measuring type (more): Absorption cells Layer thickness: 20 mm Cuvette volume: 7000 µl Product weight: 0.05 kg

LABORATORY OVEN SLN SMART POL-EKO SLN - NATURAL AIR CONVECTION The SLN series laboratory ovens are d (more)esigned to reach high temperatures, up to 300 °C. Available from 15 to 245 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLN SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLN SMART SERIES The seven models of the SLN series cover most of your needs: from mini stoves to the 245 liter internal volume model. For larger volumes, look at the SLW series stoves. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

Thermoregulation and thermal stability at their best The Auto-Tuning thermoregulation system guarant (more)ees excellent thermal homogeneity and stability (±0.5°C). Ecological cooling system and low operating costs. Selectable incubation temperature and working range from 3 to 50°C. Uniform temperature thanks to VELP ventilation technology. 3-digit DIGITAL DISPLAY, resolution 0.1°C. - Transparent internal door for observation of the sample without temperature alterations Reliable and easy to control Volume of 109 liters net. Internal sockets to power devices. Intuitive digital interface, with three buttons for easy setup of the instrument. Constant monitoring according to GLP (Good Laboratory Practice). Adjustable recording time (in case of connection to VELP Ermes and TempSoft™). The optional TempSoft ™ incorporates high / low alarm thresholds. Quick and easy calibration. In the photo: the interior of the FOC 120E model, with the two electrical sockets, forced ventilation and the 6-position system for BOD Sensor Velp analysis; the control panel with the clear digital display to the tenth of a degree; the transparent internal door. Our life is connected, giving us previously unimaginable possibilities, why not connect your laboratory too? Improved productivity and safety; sharing analysis and assistance in a few clicks! Monitor your instrument anytime, anywhere with VELP Ermes Thanks to Velp Ermes you will no longer need cables. Discover the platform that allows you to reduce repetitive manual tasks with real-time control of your FOC Connect wherever you are. Access the data recording of your instrument wherever you are, in total safety, through the VELP Ermes platform and benefit from software updates and immediate ad hoc assistance, without the need for specialized technicians. Immediate notifications and alerts will allow you to always be informed about the status of your analyzes, improving productivity and reproducibility. The Ermes cloud subscription, which allows you to connect up to 10 instruments, is available for 1 or 3 years and must be ordered separately. IN OPTION! Control your FOC Connect via TEMPSoft ™ software Through the optional TEMPSoft ™ software and the relative connection of the FOC Connect to the PC, you can: - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with GLP (Good Laboratory Practice) FOC Connect is supplied with the MODBUS communication protocol.

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

External dimensions (WxDxH): 600 x 595 x 635 mm Internal dimensions (WxDxH): 503 x 463 x 480 mm Max  (more)single load: 10 L Max symmetrical distributed load: 30 kg Weight: 125 kg

Dimensions (H x W x D): 390 x 340 x 600 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW