Radwag HX5.EX-1.4.600.H9/Z 4 Load Cell Platform Scale, Pit Version

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Pathlength: 1 mm

A&D Weighing Galaxy HR-250AZ Analytical Balance, 252 g, 0.1 mg Capacity 252 g Readability 0.1 m (more)g Repeatability 0 to 200 g: 0.1 mg 200 to 252 g: 0.2 mg Features - Compact Super Hybrid Sensor (C-SHS) enables space saving with fast 2 sec stabilization - One-touch Cal allows any user to perform internal calibration in seconds - HR-AZ Series products come equipped with internal calibration, ensuring precision and ease of use to meet diverse application and budgetary needs. - Rugged, shatterproof breeze break with anti-static plastic provide safety for challenging applications where product & user safety is a concern - Rotary-Radius doors take up no extra room in fume hoods/glove box and increase safety by avoiding operation mishaps - The breeze break detaches in an instant, even with heavy gloves, making it easy to clean and safe to top-load - Simple user navigation makes this ideal entry level balance from lab to industrial weighing environments - Front mounted illuminated spirit bubble makes for an easy leveling experience to ensure the best performance - Removable breeze break allows effortless cleaning of SS pan, spill ring, base floor - Breeze break top pivots left or right to allow easy access for tall flasks and beakers The A&D Weighing Galaxy HR-250AZ Analytical Balance, 252 g, 0.1 mg, combines compact design with exceptional precision, suitable for a variety of lab and industrial environments. This model features the innovative Compact Super Hybrid Sensor (C-SHS), which not only saves space but also ensures rapid results with a 2-second stabilization time. Internal calibration is streamlined through a one-touch feature, making it easy for any user to execute, enhancing operational efficiency and ensuring reliable readings. Safety and convenience are at the forefront of the HR-250AZ's design. It includes a rugged, shatterproof breeze break with an anti-static coating to prevent contamination in sensitive work environments, such as pharmaceutical and food industries. The balance's doors are designed to rotate within their radius, requiring no additional space, which makes it ideal for use in tight spaces like glove boxes and fume hoods. Additionally, its breeze break can be quickly detached, even with gloves on, simplifying the cleaning process and ensuring the balance is safe for top-loading operations. The HR-250AZ supports a wide range of measurement units and offers features like statistical calculation, percentage analysis, and piece counting, catering to diverse analytical needs. A front-mounted illuminated spirit level ensures proper setup for optimal accuracy, and the large, backlit display enhances visibility under any lab conditions. All models in this series come equipped with features designed to enhance usability and accuracy, including rotary doors that save space and facilitate easy access. This analytical balance is designed for long-term reliability and simplicity, backed by a 5-year warranty, ensuring trustworthy performance for years to come. INCLUDED: The A&D Weighing Galaxy HR-250AZ Analytical Balance, 252 g, 0.1 mg includes: - Large Breeze Break w/ Antistatic Coating - Weighing Pan - Pan Support - Breeze Break Ring - Dust Plate - AC Adapter Plug - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Transponder card reader is used for quick identification and logging of operators to a weighing syst (more)em or identification of vehicles on a weighbridge. CK-02/3 is designed for scales equipped with terminals PUE C41H and PUE 5 series. It is installed next to the terminal. Communication through RS 232, power supply 5V from scale terminal. Area of Use: Additional equipment of load cell based industrial scales; Identification of weighing instrument operator; Identification of vehicles on weighbridges. Design: Transponder card reader CK-02 is manufactured in plastic housing. Intended Use: Designed for scales equipped with terminals PUE C41H and PUE 5 series. It is installed next to the terminal. Communication through RS 232, power supply 5V from scale terminal.

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 kg to 50kg for F2 class and lower. The comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator 5Y.PM.KB series comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. High measuring accuracy is guaranteed by semi-automatic adjustment system with external mass standard. The weighing pan is made of aluminium and features holders for centering the tested mass standard. The 5Y.PM.KB series features an intuitive menu supporting a user while operating the instrument.

IKA R 3003.1 Spiral stirrer Maximum Speed ≤ 800 rpm Flow Type Axial Material Stainless Steel Feature (more)s - Generates axial flow, efficiently conveying medium from the bottom upwards - Optimized for homogeneous mixing and heat exchange in medium to high viscosity media - Ideal for use at low to medium speeds for precise control - Stirrer diameter: 100 mm for effective mixing in larger volumes - Made of AISI 316L / 1.4571 stainless steel, offering high resistance and durability - Operates within a wide ambient temperature range of 5 - 40 °C, versatile for various lab conditions This stirrer is designed to generate an axial flow, directing medium from the bottom upwards for efficient mixing and heat exchange in medium to high viscosity media. With a 100 mm diameter and a 550 mm shaft length, it's constructed from AISI 316L / 1.4571 stainless steel for exceptional durability and corrosion resistance. Suitable for low to medium speed operations, it provides precise control for a wide range of applications. Its robust design, weighing 0.62 kg and measuring 162.8 mm in height, ensures stability and performance within an ambient temperature range of 5 - 40 °C.INCLUDED: The IKA R 3003.1 Spiral stirrer includes: - IKA R 3003.1 Spiral stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty