General laboratory equipment

Specifications of the machine: Manufacturer: SpectruMedix Type 96-capillary Genetic Analysis System  (more)Year: 03-07-2006 There’s even a new capillary cartridge at 3 and UPSs to ensure the power supply. 380Volt

emergency shower

Digital heating block. VWR. Technical details:

Dimensions (HxWxD): 1950 x 710 x 650 mm Internal dimensions (HxWxD): 1730 x 490 x 400 mm Fire class: (more) 120 minutes

Dimensions (HxWxD): 1985 x 750 x 555 mm Internal dimensions (HxWxD): 1770 x 545 x 350 mm Fire class: (more) 120 minutes

Temperature range: 0 – 8°C Dimensions (HxWxD): 845 x 500 x 540 mm Capacity: 112 L Weight: 25.4 kg

Inline User-Fillable Kit and Prep Kit are used to deliver reagents and solutions on the VENTANA Benc (more)hMark Series automated slide stainers (BenchMark, BenchMark GX, BenchMark XT, and BenchMark ULTRA). The dispenser in the kit is intended for single use only. Ventana has not validated the cleaning of these dispensers and re-use with a second reagent. This product is intended for in vitro diagnostic (IVD) use. Set containing a prep kit 1 through 10

Temperature range: 4°C to 15°C Dimensions (HxWxD): 2050 x 710 x 815 mm Internal dimensions (HxWxD):  (more)1510 x 590 x 620 mm

The GE is one of the most reliable and functional upright laboratory cabinets currently available on (more) the market. The GE upright laboratory cabinet boasts an extremely elegant and practical design: in fact, the unit is manufactured with materials of exceptional quality and maximum attention to detail. Furthermore, the internal edges are rounded in order to ensure easy cleaning. Capasity: 620L Temperature Range: +2…+8°C Adjustable support feets Exterior Stainless steel Stainless steel framework Door with lock Environmentally friendly CO2-blown polyurethane insulation Electronic control unit Reversible door Outside dimensions (w x d x h): 720mm x 850mm x 2050mm Inside dimensions (w x d x h): 600mm x 675mm x 1320mm 230V / 50Hz / 500W

Dimensions (ØxH): 520 x 1300 mm Neck (Ø): 40 mm

No matter how quickly you need to produce results or how much pressure you have to control costs, yo (more)u know that no margin of error is acceptable in a blood bank. We designed the ORTHO AutoVue Innova System to comprehensively address safety—from helping to reduce the potential for human error through increased automation and ease of use to increasing accuracy with dozens of additional process checks. So you can be ready to meet your toughest challenges with full confidence in the safety of your results.

The Bio Data Platelet PAP 4-C Aggregation Profiler is a four channel Platelet Aggregation Profiler w (more)ith four test modes are available: Chromogenic Assays- von Willebrand Assay (Ristocetin Co-factor)- Platelet Aggregation and Leukocyte Aggregation. The PAP-4C may also be used for the evaluation and confirmation of Heparin Induced Thrombocytopenia (HIT). Four channels allow four tests to be run simultaneously and independently Chromogenic Assay Von Willebrand Assay (Ristocetin Cofactor) Platelet Aggregation Leukocyte Aggregation Heparin Induced Platelet Aggregation (HIPA) for Heparin-Induced Thrombocytopenia (HIT) Dimensions (h x w x d): 220mm x 515mm x 565mm 220V / 50-60Hz / 300W

AIR, O2, CO2

Vertical elektroforesesystems, kuroGEL Verti 1824K

The MJ Research PTC-100 Thermal Cyler is a robust thermocycler that operates with 96-well microplate (more)s. This thermocycler is reliable and easy-to-use, while also offering various temperature configurations from 0°C to 105°C with temp accuracy of ± 0.3°C. The PTC-100 has a heated lid for oil-free operation, which allows for convenient pressure and height adjustment via a thumbwheel. Crafted to withstand repeated cycling, the PTC-100 thermocycler can follow any temperature sequence up to 10,000 times and can store material indefinitely at any temperature, allowing for highly accurate incubation rates. The MJ Research PTC-100 can store approximately 320 programs and comes with 14 pre-programmed protocols. Due to the PTC’s power-failure protection feature, data is safe after power interruption for up to twelve hours. Thermal Range: 0°C – 105°C Accuracy: ±0.5°C of programmed target at 60°C Thermal Uniformity: ±0.4°C well-to-well within 30 sec of arrival at 60°C Ramping rate: up to 1.2°C/sec Sample Capacity: 96 x 0.2 ml tubes or one 96-well plate

The Profinia protein purification system is an automated chromatography system that provides a simpl (more)e solution for the purification and desalting of milligram amounts of affinity-tagged proteins. Flow rate range: 0.2 – 20 ml/min Maximum backpressure: 3.4 bar UV absorbance wavelength: 280 nm Conductivity monitor range: 0 – 500 ms/cm Pressure: Sensor monitors system pressure Solvent compatibility: All commonly used chromatographic solvents Dimensions (WxDxH): 580 x 330 x 670 mm

Technology: Urine flow cytometry, Two stains with fluorescent dye, Separate bacteria channel for imp (more)roved discrimination

Electrical: Temperature: Weight: 7.9 kg Dimensions (closed position) wxdxh: 20x37x17 cm

The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetti (more)ng system, and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin-column kits.  The QIAcube is preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids, and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded free of charge. In addition, customized protocols tailored to meet your specific application demands can also be requested.  The QIAcube is highly suitable for academic research laboratories as well as pharmaceutical, biotechnology, and biomedical research laboratories performing applications, such as: Sequencing/sequencing analysis Gene expression analysis Genotyping Proteomics Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (noncondensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18 – 28°C Pipetting system: Syringe size 1 ml, pipetting range 5-900 µl Samples per run: 1–12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range of room temperature to 70°C, ramp-up time of <5 min from room temperature to 55°C (± 3°C) Software: QIAGEN protocols are preinstalled on the QIAcube or can be downloaded at www.qiagen.com/MyQIAcube Weight: 70.5 kg

The Model 400 Hybridization oven is a high precision rotating convection oven for Northern blot and  (more)Southern blot hybridizations and other applications.

19′ inch

The G1-LN-800 is a gas generator intended for the continuous production of nitrogen with over 99.999 (more)% purity, that is often required in a variety of life science applications. This model offers a very quiet and user friendly (plug and play) operation and comes equipped with a built-in compressor unit that is completely oil-free. It is also highly economical as it offers very high production up times without the need for any additional supply options and is available with the extensive aftermarket support. This unit is capable of accommodating flows of up to 800 ml/min and can safely operate at temperatures from 5 to 45 °C. Dimensions (h x w x d): 560mm x 400mm x 700mm 230V / 50-60Hz