General laboratory equipment

Simultaneously perform dewaxing and antigen retrieval on slides prior to immunohistochemical stainin (more)g. Module offers consistent antigen retrieval for high quality immunohistochemistry. Using gentle heat, the retrieval device quickly produces outstanding results while maintaining the integrity of delicate tissue. In addition, most users can streamline testing practices by consolidating various antigen retrieval methods into only one or two PT Module antigen retrieval device procedures that can be run simultaneously. Precise temperature control without the damaging effects of temperature variations, microwaves or pressure delivers a level of consistency unmatched by any other instrument available. Easy to use, one-touch operation via built-in touchscreen Operator defined, preprogrammed time and temperature settings Dual reaction baths, each with 24-slide capacity, for simultaneous operation of two independent procedures Proprietary epitope recovery solutions for safe, nontoxic, solvent-free and environmentally improved dewaxing Provides for rapid, gentle heating, eliminating microwave and pressure cooker variability Maintains excellent tissue/cellular morphology Efficient, time-saving transfer of fully compatible slide racks directly to any Autostainer after treatment to avoid slide manipulation Fully programmable for overnight operation or delayed-start, early-morning pre-heating Can be connected to a remote computer to monitor and log antigen retrieval reports for regulatory compliance. The PT Module is fully automated and includes PT Monitor software for printing/maintenance of regulatory compliant procedural reports. Slide Capacity: 48 Glass slides (2 tanks of 24 slides) Reagent Capacity: 1.5 L Including PC

2 Drawer cabinet, low/ Special drawers/ Grey/ 600x480x800

Office Table/ Electric Adjustable/ L. Grey/ 1200×1030

About LabForRent Find the lab that suits you best On this website of LabForRent you will find all th (more)e available Life Sciences laboratories and R&D properties in the Netherlands. Use the selection criteria to indicate what is essential for you. That way you can easily find the lab that best meets your needs and situation, regardless whether it concerns long-term rental or temporary use. LabForRent is an enterprise that draws attention to laboratories located in companies, incubators and science parks which could be of use to start-ups and developing companies – just to name a few. We display the technical specifications, the supporting facilities and services in the available laboratories. This information is freely available to everyone. Do your own searching LabForRent offers you a wide selection with no strings attached. You select the suitable lab from our selection and then contact LabForRent. You can also enter a search query. For a one-time fee of € 295,- ex VAT, we will actively search (including in our database and within our connections) for suitable space and keep you closely informed of the progress. You will be notified as soon as a new space that matches your desired profile appears. The costs for renting a specific space depend entirely on the hiring of the party and the facilities/surface that is rented. Visits to the facilities (if desired) are guided. You can send us a search.

Dimensions (WxD): 2890 x 730 mm

Dimensions (H x W x D): 940 x 1500 x 600 mm Internal dimensions central cabinet(H x W x D): 470 x 57 (more)5 x 565 mm Internal dimensions side cabinets (H x W x D): 665 x 565 x 390 mm

Dimensions drawer cabinet (WxDxH): 1200 x 480 x 1350 mm Dimensions wall cabinet (WxDxH): 1200 x 480  (more)x 900 mm

Dimensions (WxDxH): 1200 x 480 x 900 mm

Dimensions (HxWxD): 620 x 575 x 520 mm Internal dimensions (HxWxD): 580 x 535 x 455 mm

Dimensions (HxWxD): 600 x 600 x 350 mm Internal dimensions (HxWxD): 550 x 560 x 290 mm Turning right

Dimensions (HxWxD): 650 x 565 x 486 mm

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg

Capacity: 34 L Daily evaporation: 0.17 L/day Dynamic endurance: 125 days Neck diameter: 91 mm Canist (more)ers: 6 Vial Capacity: 684 Weight (empty/full): 16.1/43.5 kg

Stirring speed: up to 1100 rpm Suitable for volumes up to 5 liters (H2O) Plate diameter: 125 mm Idea (more)lly suited for titrations Dimensions (WxHxD): 150 x 115 x 235 mm Weight: 1.5kg

Compact, universal small shaker suitable for shaking tasks with all small vessels and microtiter pla (more)tes . Two operating modes: Mode A (safe mode with attachment detection) the maximum speed of 3.000 rpm is only reached with the standard attachment in touch mode. When using other attachments the speed is limited to 1.300 rpm. Mode B (without attachment detection) a speed of 3.000 rpm is possible with all attachments. Orbital shaking movement amplitude 4.5 mm Speed 0 – 3000 rpm Suitable for tubes and microtiter plates Dimensions (lxwxh) 148 x 205 x 63 mm Weight 2.9 kg

Temperature settings: -18°C/-20°C/-22°C/-24°C/-26°C Dimensions (HxWxD): 1850 x 600 x 650 mm Internal (more) dimensions (HxWxD): 1580 x 450 x 360 mm Capacity: 282 L

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg

Internal dimensions (H x W x D): 340 x 560 x x430 mm

Dimensions (H x W x D): 600 x 600 x 480 mm Internal dimensions drawer (H x W x D): 70 x 505 x 395 mm