General laboratory equipment

Square Wave Pulse Ranges Voltage Range: LV Mode 5 to 500/1 V res, HV Mode 505 to 3000/5 V res Voltag (more)e Accuracy: LV Mode 5%, HV Mode 5% Pulse Length Range: LV Mode 10 µs to 999 µs/ 1 µs res, 1 ms to 999 ms/1 ms res, HV Mode 10 µs to 600 µs/1 µs Multiple Pulsing: LV Mode 1 to 120 (10 per sample), HV Mode 1 to 36 (3 per sample), Pulse Interval 0.1 s to 10 sec Capacitance in µF: LV Mode 3775 µF, HV Mode 85 µF, Voltage Droop 20% Load < 1 K Ω, 10% Load > 1 K Ω Exponential Decay Pulse Ranges Voltage Range: LV Mode 5 to 500/1 V res, HV Mode 505 to 3000/5 V res Voltage Accuracy: LV Mode 5%, HV Mode 5% Time Constant Range: LV Mode 1 ms to 5.158 S, HV Mode 0.5 ms to 133.875 ms Multiple Pulsing: Multiple Pulsing 1 to 12 (Rint <100 ohm), 1 to 24 (Rint >100 ohm), Pulse Interval 5 to 30 sec Capacitance in µF: LV Mode 25 to 3275 µF/25 µF res, HV Mode 10, 25, 35, 50, 60, 75, 85 µF Internal Resistance (in parallel with load): LV 25 to 1575 Ω / 25 Ω res, HV 50 to1575 Ω / 25 Ω res Sample Resistance (Load) Exponential Decay or Square: LV Mode PL ≤ 100ms, load ≥ 8-9 Ω, PL >100ms, load ≥100 Ω, HV Mode Load ≥ 40 Ω Charging Time: LV < 7 sec, HV < 4 sec Monitoring: Pulse Voltage, Width, Droop % and Sample Resistance Programmability: Storage over 1000 Protocols Arc Control: Yes Interlock Switches: Yes Pre-Pulse Sample Resistance Check: Yes Pulse Over Current Protection: Yes PC Control: Yes PC Communications: Yes Log Report: Yes Remote Operation: Yes Foot Switch Control: Yes Dimensions (HxWxD): 324 x 286 x 216 mm Weight: 7.3 kg

The Qubit fluorometer uses the very latest in illumination and detection technology for the highest  (more)sensitivity, you can use as little as 1 µL of sample and still get great results, even with very dilute samples. Dynamic range: 5 orders of magnitude Light sources: Blue LED (max ~460 nm), Red LED (max ~635 nm) Excitation filters: Blue 400 – 490 nm, Red 570 – 645 nm Emission filters: Green 510 – 580 nm, Red 655 – 725 nm Photodiode detectors: 300 – 1000 nm Calibration: 2 or 3 point standard Tube type: 500 µL clear tubes Warm up time: 2 sec Dimensions: 114 x 166 x 46 mm Weight: 219 g

Syncore is easy to use, allowing you to perform parallel evaporation with minimal supervision, freei (more)ng your time for other tasks. Process automation ensures the highest analytical precision and safety standards of our synchronized sample solutions. Rotation speed range: 60 – 400 rpm Temperature range: 20 – 100°C Temperature accuracy at 100°C: ±1°C Block capacity: 24 x 60 ml Dimensions (WxDxH): 500 x 520 x 325 mm Weight: 30 kg

The Luminex 100 System is a flexible analyzer based on the principles of flow cytometry that enables (more) you to multiplex (simultaneously measure) up to 100 analytes in a single microplate well, using very small samples. The system delivers fast and cost-effective bioassay results on many assay formats including nucleic acid assays, receptor-ligand assays, immunoassays, and enzymatic assays. The Luminex 100 System is the combination of three core xMAP Technologies. The first is xMAP microspheres, a family of fluorescently dyed micron-sized polystyrene microspheres that act as both the identifier and the solid surface to build the assay. The second is a flow cytometry-based instrument, the Luminex 100 analyzer, which integrates key xMAP detection components, such as lasers, optics, fluidics, and high-speed digital signal processors. The third component is the xPONENT Software, which is designed for protocol-based data acquisition with robust data regression analysis. Multiplexing: Up to 100 analytes per sample (80 on MagPlex microspheres) Dynamic Range (Typical): ≥3.5 logs Read Time: 96-well plate in ≤45 min (up to 12,800 tests/hour) Daily Start-Up/Shut-Down: ≤30 min

The 874 Oven Sample Processor is used for automatic thermal sample preparation in Karl Fischer titra (more)tion. The oven method is particularly suitable for samples that do not release their water until higher temperatures have been reached, for sparingly soluble samples, or those that react with the KF reagent.

Old Interscience FID Trace GC without software

Old Interscience FID Trace GC without software

Old Interscience FID Trace GC without software

Three independently controlled stirring positions Powerful magnets for strong magnetic coupling Stai (more)nless steel top plate A space saving and economical unit with three independent stirring positions in a footprint only 600 x 270 mm. Easily accommodates 3 x 2 litre beakers. The stainless steel top plate is robust and, unlike aluminium, does not produce eddy currents and so ensures a very powerful coupling and stirring action. Powerful magnets and motor give stirring speed up to 1500rpm and volumes up to 15 litres Plate material: Stainless steel Plate dimensions: 550 x 210 mm Speed range: 100 to 1500 rpm Dimensions (WxDxH): 600 x 270 x 110 mm Weight: 7 kg

System consists of:  Spark Conditioned Stacker Model 931 Spark Autosampler Model 930 Spark LC-Pump M (more)odel 750 (x2) Spark High Pressure Dispensor Model 730 (x2) Spark ACE Model 725 Spark Mistral Model 885

Digital temperture control and selectable display of set and actual temperature PT100 sensor Timer 1 (more) to 99 min with audible alarm Overheating protection (even when bath is empty) Capacity: 16L Outer dimensions(w x d x h): 331mm x 396mm x 265mm Bath dimensions(w x d x h): 290mm × 300mm × 190mm Weight: 10kg Including rack with 36 spaces

Capacity: 243 L Dimensions: H 168 x W 60cm Content: 243 liters Colour White Voltage: 220

Specifications of the machine: Manufacturer: SpectruMedix Type 96-capillary Genetic Analysis System  (more)Year: 03-07-2006 There’s even a new capillary cartridge at 3 and UPSs to ensure the power supply. 380Volt

emergency shower

Digital heating block. VWR. Technical details:

Dimensions (HxWxD): 1950 x 710 x 650 mm Internal dimensions (HxWxD): 1730 x 490 x 400 mm Fire class: (more) 120 minutes

Dimensions (HxWxD): 1985 x 750 x 555 mm Internal dimensions (HxWxD): 1770 x 545 x 350 mm Fire class: (more) 120 minutes

Temperature range: 0 – 8°C Dimensions (HxWxD): 845 x 500 x 540 mm Capacity: 112 L Weight: 25.4 kg

Inline User-Fillable Kit and Prep Kit are used to deliver reagents and solutions on the VENTANA Benc (more)hMark Series automated slide stainers (BenchMark, BenchMark GX, BenchMark XT, and BenchMark ULTRA). The dispenser in the kit is intended for single use only. Ventana has not validated the cleaning of these dispensers and re-use with a second reagent. This product is intended for in vitro diagnostic (IVD) use. Set containing a prep kit 1 through 10

Temperature range: 4°C to 15°C Dimensions (HxWxD): 2050 x 710 x 815 mm Internal dimensions (HxWxD):  (more)1510 x 590 x 620 mm

The GE is one of the most reliable and functional upright laboratory cabinets currently available on (more) the market. The GE upright laboratory cabinet boasts an extremely elegant and practical design: in fact, the unit is manufactured with materials of exceptional quality and maximum attention to detail. Furthermore, the internal edges are rounded in order to ensure easy cleaning. Capasity: 620L Temperature Range: +2…+8°C Adjustable support feets Exterior Stainless steel Stainless steel framework Door with lock Environmentally friendly CO2-blown polyurethane insulation Electronic control unit Reversible door Outside dimensions (w x d x h): 720mm x 850mm x 2050mm Inside dimensions (w x d x h): 600mm x 675mm x 1320mm 230V / 50Hz / 500W

Dimensions (ØxH): 520 x 1300 mm Neck (Ø): 40 mm

No matter how quickly you need to produce results or how much pressure you have to control costs, yo (more)u know that no margin of error is acceptable in a blood bank. We designed the ORTHO AutoVue Innova System to comprehensively address safety—from helping to reduce the potential for human error through increased automation and ease of use to increasing accuracy with dozens of additional process checks. So you can be ready to meet your toughest challenges with full confidence in the safety of your results.