Medline Scientific Incubated Shaker Model - IS-971RF Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Ohaus heavy-duty orbital shakers These models are designed to handle a wide range of applications, e (more)nsuring constant orbital shaking. Digital models offer accurate speed control for applications that require repeatable results. - Includes a tray and a rubber mat; over 70 accessories as an option - Maintenance free motor - Protect your champions. The increase function allows a gradual increase of the speed up to the set point, to avoid splashing. If so, a sensor detects the unbalance of the load and slows down the speed reaching a safer one Applications Cell cultures, solubility studies, extractions, suspensions and bacterial and yeast cultures, dyes / bleaches, immunoassays, protein studies, absorption techniques Display Easy-to-read independent LED displays with speed and time information, allowing the operator to view both settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) Construction features Integrated tray (910 x 610mm) with non-slip rubber mat included.

ELMI Sky Line Digital Orbital Rocking Shaker Rocker S-4 Lab This item was removed from a university  (more)where it was surplus to requirement. It is in good cosmetic condition and in good working order. The power supply is not included.

New Brunswick Scientific G-25 Foor Standing Incubator Shaker This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in full working order. It is in reasonable cosmetic condition but has seen some heavy use and has lots of marks and scuffs. Shaker platform - 76 x 46cm

Ohaus SHHD6850DG Heavy Duty Shaker The Ohaus SHHD6850DG Digital 68 kg Capacity Orbital Shaker is the (more) largest capacity shaker designed for the heaviest of loads. They have the most powerful drive mechanism of all the shakers and large orbits for optimal shaking of larger vessels with an orbit of 2 inches. With load capacities from 150 lbs and over 70 accessory options, and with microprocessor control to provide variable speed and consistent shaking, while ramping to the set speed. Microprocessor displays the last set-point and will restart if power is interrupted. Built-in tray and non-slip rubber mat included with the SHHD6850DG. The exclusive Accu-Drive shaking system on digital models utilizes dual-speed sensors to continuously monitor and maintain shaking speed - delivering exceptional speed control, accuracy & durability. Touchpad controls with independent LEDs for speed/time allow operator to view all settings at once. Timer displays elapsed time or when programmed to a set time, will turn off when time reaches zero. Speed ramping feature slowly increases the speed to desired setpoint to avoid splashing. The load sensor detects unbalanced conditions and automatically reduces rpm to a safe speed to protect samples.Click Here to View Product Video INCLUDED: The Ohaus SHHD6850DG Heavy Duty Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Roller 6 Digital Shaker Type of Movement Rolling Speed Range 5 to 80 RPM Number of Rolls 6 Roll (more)s Features - Timer: Countdown, adjustable from 1 s to 99h 59min - Counter: Display of shaking time - Error Code Display - Usable at 4 to 50 °C in incubators - Suitable for continuous operation - Removable rolls enable shaking of larger tubes - Easy operation with keypad - Shaking diameter: 24,5 mm (height) - Speed range: 5 - 80 rpm The IKA Roller 6 Digital Shaker with 6 rolls provides smooth rocking and rolling action at infinitely adjustable speeds. Used for mixing blood samples, solid and liquid suspensions, and viscous samples, the unit can be used with all conventional tubes and cylindrical bottles. Easily removable attachments provide for quick cleaning in case of sample spills. The shaker features a countdown timer adjustable from 1 second to 99 hours and 59 minutes, and a counter display for shaking time. It operates effectively at 4 to 50 °C in incubators and is suitable for continuous operation. Removable rolls enable the shaking of larger tubes, and easy operation is ensured with a keypad. The speed range is 5 - 80 rpm with a 7-segment LED display, adjustable in 1 RPM steps.

IKA Matrix Orbital Delta F2.0 Thermoshaker Speed Range 0 - 1500 rpm Time Setting Max. 6000 min Hea (more)t Output 100 Watts Features - Large and clear display with a convenient menu structure allows for intuitive operation - Speeds of up to 1,500 rpm and shaker diameter of 3 mm ensure the liquid mixes quickly and effectively - Two different speed modes for gentle heating of the samples - Programmable ramps allow for automatic execution of mixing and heating tasks - Smart speed adjustment according to insert, attachment and filling volume - Aluminum die cast housing ensures secure positioning, excellent stability and everyday robustness The IKA Matrix Orbital Δ F2.0 is part of a new and powerful product family of thermoshakers available. IKA Matrix Orbital Δ F2.0 mixes and heats with a fixed insert for 24 x 2.0 ml tubes. Whether its blood samples, pharmaceutical agents, DNA/RNA samples or ELISA assays – samples with even the smallest volumes mix reliably and completely in all laboratory applications. No cross-contamination and an optimal mixing result.In addition, IKA Matrix Orbital Δ F2.0 comes with numerous user-friendly features: Click Here to View Product Video INCLUDED: The IKA Matrix Orbital Delta F2.0 Thermoshaker includes: - MATRIX Orbital Delta F2.0 - IKA Pette vario 100-1000 µl - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Matrix Orbital Delta F2.0 Thermoshaker Specifications Type of movementorbitalShaking stroke3 mmMaximun load0.3 kgPermissible ON time100 %Speed min (adjustable)300 rpmSpeed range0 - 1500 rpmSpeed displayTFTSpeed deviation30 ±rpmSpeed control10 RPM StepsTimeryesTimer displayTFTTime setting min.1 sTime setting max. 6000 min Operating mode timer, continuous and program operationHeating temperature rangeroom temp. +4° - 100 °CHeat output100 WHeat controlTFTSet temperature resolution1 ±°CTemperature control accuracy0.5 ±°CTemperature stability0.5 °CTemperature homogenity0.5 (@ 20°C ... 45°C); 1.5 ±°CHeating rate13 °C/minTemperature displayyesNumber of reaction vessels24x 2.0 mlDimensions (W x H x D)216 x 158 x 351 mmWeight9.2 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21RS 232 interfaceyesUSB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input240 WPower input max.240 WFuse2x T4A 250VComparison of ModelsSpecificationsMatrix Delta PlusMatrix Orbital Delta F0.5Matrix Orbital Delta F1.5Matrix Orbital Delta F2.0Matrix Orbital Delta FPMatrix OrbitalMatrix Orbital PlusShaking Stroke3 mm3 mm3 mm3 mm3 mm3 mm3 mmMaximum Load0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kgSpeed Range0 - 3000 rpm300 - 2000 rpm300 - 1500 rpm300 - 1500 rpm300 - 2000 rpm300 - 3000 rpm300 - 3000 rpmSpeed Control10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM StepsTime Setting Min.1 s1 s1 s1 s1 s1 s1 sTime Setting Max.6000 min6000 min6000 min6000 min6000 min6000 min6000 minHeating Temperature Range-10 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C--Heating Rate5.5 °C/min15 °C/min11 °C/min13 °C/min18 °C/min--Dimensions (W x H x D)216x127x351 mm216x149x351 mm216x158x351 mm216x158x351 mm216x147x351 mm200x120x320 mm216x127x351 mmVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Automatic checkweigher DWT/RC/HYF series is dedicated to work on technological lines of food industr (more)y, where high humidity and frequent high pressure cleaning are the major issues. The construction has been designed to enable fast and easy cleaning. Special emphasis has been put on elimination of gaps, spaces and flat surfaces susceptible to condensates and waterstains. The structure of the conveyor belt allows washing it inside and outside without dissembling. The electronics has been placed high above the weighing platform for minimizing the possibility of inundation of the control panel. The checkweigher DWT/RC/HYF series is created in accordance with vertical space division. “Clean zone” ranges from the floor to the level of the conveyor belt (the area where food and production waste accumulates). “Technological zone” is placed above the production line. The control mechanism is based on a terminal HY series, facilitating easy communication between the operator and the machine and providing additional features. Standard functions: - Database of operators and products - RS 232/485 and Ethernet interfaces - I/O control - Current weighing statistics - Automatic printouts - Reports - Cooperation with computer software Additional functions: - Faulty goods discriminator - Barcode scanner - The checkweigher can be equipped with standard ink printers and labelling printers allowing to print the tags of the weighed products - Sounder and/or Warning tower lights - Cooperation with feeders, mounted to the front side, in a feedback system.

Precision suction, error-free measurements The product is supplied with two internal pumps and two b (more)uilt-in buttons used to operate separate pumps. Backlit buttons inform you about operation of a specific pump. The set has two tips for sucking water out of a single beaker (one-channel tip) or four pipettes at a time (four-channel tip). Water is carried from both channels to the beaker through one tube. The power is provided to the pump through a USB A in the weighing terminal. You can supply power from the phone charger, for instance.

Ohaus 30400131 Thermal Block for 24 x 2.0 mL Tubes The Ohaus 30400131 Thermal Block for 24 x 2.0 mL  (more)Tubes is crafted from Valox 357 Plastic for durability. This block is compatible with all Ohaus ISTH Series Thermal Shakers, and has a well depth of 1.39 in. INCLUDED: The Ohaus 30400131 Thermal Block for 24 x 2.0 mL Tubes includes: - Clear Rack and Cover - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Thermo 75003614 Buckets for TX-750 Rotor The Thermo 75003614 Buckets are rectangular-shaped buckets  (more)designed to be used with the TX-750 Swing Bucket Rotor. They can hold up to 4 x 250ml tubes and are capable of a maximum speed of 4,500 RPM and a maximum RCF of 4,415 x g. These buckets are made from durable materials that are capable of withstanding high-speed centrifugation, making them suitable for high-throughput applications. Whether you're working in a research or clinical laboratory, these buckets are a reliable choice for your centrifugation needs. INCLUDED: The Thermo 75003614 Buckets for TX-750 Rotor includes: - Set of 4 Buckets - Full 6 Month Parts and Labor Warranty Thermo 75003614 Buckets for TX-750 Rotor SpecificationsMaximum Speed4,500 RPMMaximum RCF4,415 x gMaximum Capacity4 x 250mlMaximum Radius19.5 cmRotor CompatibilityTX-750 Swing Bucket RotorDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }