General laboratory equipment

This revolutionary training arm provides complete venous access for IV therapy and phlebotomy, plus  (more)sites for intramuscular and intradermal injections. An extensive 8-line vascular system allows students to practice venipuncture at all primary and secondary locations, including starting IVs and introducing Over the Needle IV Catheters. The venous system simplifies setup with only one external fluid bag supplying artificial blood to all veins simultaneously. The dorsal surface of the hand includes injectable metacarpal, digital, and thumb veins. The antecubital fossa includes the median cephalic, median basilic, and median cubital veins. Venipuncture can also be performed along the basilic, cephalic, accessory cephalic, and median antebrachial veins. Intramuscular injections may be performed in the deltoid muscle and intradermal injection sites are located in the upper arm. Intramuscular injections into the deltoid muscle are enhanced by the soft, lifelike skin and by the natural bony landmarks in the region. Intradermal injections using distilled water will create characteristic skin welts at designated sites on the upper arm. The realism of the Life/form® Advanced Venipuncture and Injection Arm is truly amazing. The soft, flexible fingers are molded separately with extreme attention paid to every detail – right down to the fingerprints! Flexion of the wrist helps students develop manipulation skills. The replaceable skin rolls as the veins are palpated, and a discernible pop is felt when entering the veins. The Life/form® molding process reproduces the fine details of the skin to make the arm look and feel alive. Valves in the veins can be seen and palpated on the skin surface. Simulated veins and skin are completely replaceable to keep this training arm looking and working like new. Under normal use, hundreds of injections may be performed before the veins or skin need to be replaced. Complete replacement kits are available and easy to use. To extend the life of the veins, an aerosol sealant is available to seal punctures and prevent leakage.Includes 2 uarts of simulated blood, 3 cc syringe, 12 cc syringe, needle, two fluid bags, instruction manual, and soft carry case.

0

For fluid group: 1 Capacity: 50Ltr Weight: 14.6kg Max. Operating pressure: 4bar Operating temperatur (more)e: -20 to 80°C Central opening diameter: 97mm Side openings diamter: 23mm

0

Work area: 205 x 205 mm Max 36V/4A

1×200 liter 4x SD 4000 5x SD 2000

Sold separately or in combination with article no. 5741.

Open humidity chamber. Sold separately or in combination with article no. 5729.

The Qualipak 700 is a highly-sensitive, non-destructive seal integrity and leak testing instrument w (more)ith the capability to test a wide selection of flexible packs in the food, medical and pharmaceutical industries. Using the principle of measuring changes of force generated by a pack under vacuum, the Qualipak 700’s reliable and easy to use instruments offer unique and dependable solutions to flexible package testing.

Will fit the VWR Standard/Advanced 5000 shakers 4 adjustable cushioned rollers to hold glassware sec (more)urely Dimensions (WxDxH): 764×459×353 mm

Principle: Airborne microorganisms are collected on microbiological agar by impaction which is achie (more)ved by aspiration. Nominal air flow rate: 100 litres of air per minute Impact speed: <20m/sec Air sample volumes: 10, 20, 30, 50, 100, 200, 500, 1000 litres are preset (standard mode), up to eight other volumes can be selected and stored in the instrument (user mode). The maximum volume of air per cycle is 1000 litre. Suitable plate diameter: 90 mm Size: 105 x 100 x 290 mm Weight: 1750 g

Print resolution: 203 dots/inch, 8 dots/mm or 300 dots/inch, 12 dots/mm Dot size (WxL): 203 dpi – 0. (more)110 x 0.132 mm, 300 dpi – 0.110 x 0.132 mm Maximum print width: 203 dpi – 108 mm, 300 dpi – 105.7 mm Bar code modulus: 203 dpi – 5 mil to 50 mil, 300 dpi – 3.3 mil to 33 mil Programmable constant print speeds: 51, 76, 102, 127 and 152 mm/s Media label length: Minimum (tear off) – 17.8 mm, Minimum (peel off) – 12.7 mm, Maximum – 991 mm Media label width: Minimum – 19 mm, Maximum – 114 mm Media total thickness (including liner, if any): Minimum – 0.076 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm, 25 mm core – 152 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3.18 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 110 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m Ribbon core inside diameter: 25 mm Dimensions (HxWxD): 277 x 242 x 432 mm Weight: 9.1 kg

Print resolution: 203 dots/inch, 8 dots/mm – 300 dots/inch, 12 dots/mm or 600 dots/inch, 24 dots/mm  (more)Dot size (WxL): 203 dpi – 0.125 x 0.125 mm, 300 dpi – 0.084 x 0.099 mm, 600 dpi – 0.042 x 0.042 mm Maximum print width: 203 dpi – 104 mm Bar code modulus: 203 dpi – 4.9 mil to 49 mil, 300 dpi – 3.3 mil to 33 mil, 600 dpi – 1.6 mil to 16 mil Programmable constant print speeds: 203 dpi – 61, 76 through 254 mm/s in 25 mm increments, 300 dpi – 61, 76 through 203 mm/s in 25 mm increments, 600 dpi – 38, 51 through 102 mm/s in 25 mm increments Media label length: Minimum – 13 mm, Maximum 203/300 dpi – 991 mm, Maximum 600 dpi- 508 mm Media label width: Minimum – 25.4 mm, Maximum tear/cutter – 114 mm, Maximum peel/rewind – 108 mm Media total thickness (including liner, if any): Minimum – 0.058 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 110 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m, 3:1 media to ribbon roll ratio – 450 m Ribbon core inside diameter: 25.4 mm Dimensions (HxWxD): 338 x 278 x 475 mm Weight: 15 kg

Patented lighting system guarantees homogeneous light distribution Variably positionable light casse (more)tte with 5 fluorescent tubes

This printer provides both thermal transfer and direct thermal printing at user selectable speed of: (more) 50, 63, 76 mm/s. It accepts roll feed, die-cut, and fan-fold labels for both thermal transfer and direct thermal printing. All common bar codes formats are available. Fonts and bar codes can be printed in 4 directions, 8 different alphanumeric bitmap fonts and a build-in true type font capability. Print resolution/quality: 200 DPI/300 DPI Max. print width: 104 mm Color options: 1 color Connections: USB, Serial, Parallel & Ethernet

Factory settings: 2 – 3°C Suitable for: 2x 10L box or 2x 18L bag Dimensions (HxWxD): 800 x 635 x 435 (more) mm

Scanner type: Flatbed, Color Photoelectric Device: Color CCD Line Sensor Effective pixels: 27,200 x  (more)37,440 pixels at 3200 dpi Document size: 216 x 297 mm (8.5 x 11.7 in.) A4 or US letter (You can set the scanning area with your software.) Scan resolution: 3200 dpi (normal scanning), 6400 dpi with micro step (interpolated scanning) Output resolution: 25 dpi to 12800 dpi, (50 to 6400 dpi in 1 dpi steps, 12800 dpi. 12800 dpi with zoom) Scan speed: 14.3 msec/line at 3200 dpi, 3.5 msec/line at 600 dpi Color Separation:RGB Color Filters on CCD Image data: 16 bits per pixel per internal color, 16 bits per pixel per external color Brightness: 7 levels (In EPSON Scan, Brightness is controlled with gamma correction) Line Art: Fixed Threshold, Text Enhancement Technology (selectable on and off) Halftoning: AAS (Auto Area Segmentation), Selectable on and off, 3 halftone modes (A, B and C) and 4 dither patterns (A, B, C and D) for bi-level and quad-level data Gamma Correction: 2 types for CRT screen, 3 types for printer, 1 user-defined setting Color correction: 1 type for CRT display, 3 types for output to printer, 1 type for user-defined setting (only user-defined color correction is available in EPSON Scan) Interface: USB 2.0 (Type B connector) and IEEE 1394 Serial Bus Interface Light source: White fluorescent lamp with cold cathode Flawless operation: 30,000 carriage cycles (failure-free interval) Dimensions (WxDxH): 304 x 476 x 122 mm Weight: 6.0kg

Capacity: 25 L With drain valve and steel inlet filter.

Transport case for diagnostic samples in accordance with packaging regulation P 650, with two additi (more)onal loops for sealing, plastic bag with closure clip as secondary packaging. Dimensions (h x w x d): 300mm x 395mm x 395mm Weight: 3.3kg

Dimensions outside DxHxW 34,9×22,2×40 cm. Dimensions interior DxHxW 30,5×12,7×25,4 cm. Dual set func (more)tions give more flexibility: to operate the Crosslinker, you preset the energy required in microjoules (µJ), or the total time in minutes from 0.1 to 999.9.

Plinth cabinet Silver Gray 1100×720

With this washer-disinfector you can treat water-based laboratory glasses and laboratory objects int (more)ended for reuse. Laboratory glassware and laboratory objects suitable for treatment are understood to mean everything from evaporation dishes to centrifuge tubes. The treatment includes cleaning and rinsing, as well as any disinfection and drying. Given the variety of glassware, objects, applications, contaminants and disinfection parameters, it is necessary in specific situations to check whether treatment in the machine is possible. Programs: Special 93°C -10′ Standard Universal Intensive Inorganic Injector Plus Organic Pipettes Plastic Mini Oil program Dimensions (HxWxD): 835 x 600 x 600 mm Weight: 74 kg

Dimensions (HxWxD): 1920 x 900 x 560 mm

The new ETHOS X for the Microwave Green Extraction of Natural Products is available in two different (more) and interchangeable configurations, for fragrances and flavors. The ETHOS X takes advantage of a unique microwave selective heating mechanism to produce effective and consistent results time and time again. The fragrances configuration is based on the solvent-free microwave extraction (SFME) technology for the rapid extraction of essential oils from aromatic herbs, spices and dry seeds. The method involves placing a sample in the microwave reactor. A cooling system outside the microwave continuously condenses the vapors which are collected in a fragrances glassware. The excess of water is refluxed back to the extraction vessel to restore the in-situ water of the sample. The flavors configuration is based on the microwave hydro-diffusion and gravity technology (MHG), a new and green method of essential oils extraction from various aromatic plants. The microwave hydro-diffusion and gravity technology (MHG) combines microwave heating and earth gravity at atmospheric pressure to allow flavors to diffuse outside the plant material. Outside of the microwave oven a cooling system continuously condenses the extract. With both methods, after the essential oils are extracted they can be analyzed directly by GC-MS without any preliminary clean-up or solvent exchange steps. Including IKA RC 2 Control recirculating chiller

AVPS: for supplying products not being compatible among each other. 2 seperate storage shelves. Door (more) lock Height adjusable shelves Electronic warning system when fan fails Sampling valve for filter sutaration test Air flow: 90m3 / h Air recciculation: 3x / min Volume collecting tank: 3L )with absorbing layer) Outer dimensions (w x d x h): 800 mm x 505 mm x 2150 mm Inner dimensions (w x d x h): 700 mm x 425 mm x 1730 mm 230V / 50Hz / 47W