General laboratory equipment

Temperature: -90°C Dimensions (WxDxH): 500 x 800 x 400 mm Weight: 35kg Including a Thermo VLP200 vac (more)uum pump

rotor 4294 with buckets 4 inserts with 26 positions each 220-240 V 50-60Hz 7,500 rpm

Fridge temperature range: 2°C to 11°C Freezer temperature range: -9°C to -30°C Dimensions (HxWxD): 2 (more)003 x 601 x 618mm Fridge capacity: 240 L Freezer capacity: 105 L Weight: 84 kg

Dimensions (WxDxH): 1200 x 940 x 2400 mm Internal dimensions (WxDxH): 1100 x 700 x 900 mm Base cabin (more)et with extraction Taps: Compressed air, Gas, Water Extraction diameter: 195 mm

S+B Plinth cabinet 3 Drawer L.Grey 600

Interfurn Storage cupboard Double door Creme Dimensions (HxWxD): 2010 x 1200 x 490 mm

S+B Plinth cabinet door LT White 420

S+B Plinth cabinet door LT White 600

S+B Plinth Cabinet high RT White 600

Temperature: Ambient to 4°C, digitally adjustable and digitally readable per 0.1°C Stainless steel i (more)nterior Dimensions (WxDxH): 760 x 820 x 2030 mm Internal dimensions (WxDxH): 530 x 650 x 1450 mm Includes 4 height-adjustable grids.

RFM 340 refractometer Scale Refractive Index (RI): 1.33 – 1.54 Scale Sugar °Brix: 0 – 95 Resolution  (more)RI: 0.0001/0.00001 Resolution Sugar °Brix: 0.1/0.01 Accuracy RI: ±0.00003 Accuracy Sugar °Brix: 0.02 Lab circulating refrigerated water bath Temperature range: -20 to 200°C Temperature stability: ±0.03°C Pump capacity: 16 L/min Capacity: 7 litres

The Stuart sample concentrator, when used in conjunction with a Stuart block heater, uses the princi (more)ple of solvent evaporation to concentrate samples. When heat, applied to the samples by the block heater, is combined with a stream of inert (usually nitrogen) directoed onto the surface of the solution, vapour is rapidily driven off and the sample is quickly concentrated. A large number of samples can be processed in a matter of minutes. Temperature Range: Ambient +8°C to 200°C Temperature Stability at 37°C: ± 0.1°C Uniformity Within Block at 37°C: ± 0.1°C Uniformity Within Block at 130°C: ± 1°C Display Resolution: 0.1°C Dimensions (w x d x h): 310mm x 280mm x 115mm Net Weight (no blocks): 3.2 kg Equipped with 3 SHT1/16 blocks Capacity 12 holes with 16 mm tube diameter

max. temperature: 300°C max. power: 825W Speed: 100 -1400 rpm Plate diameter: 145 mm (Kera-Disk heat (more)ing plate) Stirring capacity: 20 L (based on H20)

The supply voltage converts AC line voltage to 20kHz electrical energy. This high-frequency electric (more)al energy is fed to a converter where it is converted into mechanical vibrations. The heart of the transducer is a lead zirconate titanate electrostrictive element which, when subjected to an alternating current, expands and contracts. The transducer vibrates in a longitudinal direction and transmits the motion to the horn tip which is immersed in the solution, causing cavitation. The implosion of microscopic bubbles or voids in the solution results, intensively stirring the molecules in the medium. The Sonifier operates in two modes: Pulsed and Continuous. In Pulsed Mode, ultrasonic vibrations are transferred to a solution at a rate of one pulse per second. This pulse duration can be adjusted from 0.1 to 0.9 per second, allowing the solution to be processed at full ultrasonic intensity as the temperature builds up – particularly valuable when processing hot volatile solutions and temperature sensitive material. In continuous mode, the Sonifier can be set for continuous duty. Used for: sample preparation, cell disruption, nanoparticle dispersion, mixing, homogenization, DNA, cell lysis, protein extraction

Excluding connection gas kit (see pictures for kit)

The Ettan IPGphor Isoelectric Focusing System performs first dimension isoelectric focusing (IEF) in (more) 2-dimensional (2-D) electrophoresis. The system comprises Immobiline DryStrip gel strips, which contain an immobilized pH gradient (IPG); strip holders, which serve as both rehydration and IEF chambers for the IPG strips; and the Ettan IPGphor unit, which includes a high-voltage DC power supply, solid state temperature control, and can be programmed with up to ten user-defined IEF protocols. Programmable functions include: • rehydration time • platform temperature • maximum current limit • voltage change pattern • voltage for each step in the isoelectric focusing program, and  step duration. Working surface Electrode areas: Gold-plated copper Strip holder capacity: Up to 12 fixed-length, up to 9 cup loading Platform temperature: 18°C – 25°C, ±1°C Strip holders Material: Aluminum oxide ceramic base, acrylic cover, polycarbonate, platinum on titanium Holders for IPG strip lengths: 70, 110, 130, 180, and 240 mm User interface Control panel: 7-key membrane keypad. Liquid crystal display (LCD): 2 lines, 16 characters per line Programmable parameters: Rehydration time, platform temperature, maximum current limit per strip, step voltage, step voltage change pattern, and step duration. Protocol capacity: 10, with up to 9 steps each Power outputs Voltage: 0 – 8000 V, resolution 10 V Current 0 – 1.5 mA, resolution 0.01 mA Power:  12 W max Physical parameters Dimensions (HxWxD): 140 x 250 x 460 mm Weight: 6.8 kg

Capacity: 500 L Minimum temperature: -10°C Maximum temperature: 50°C Maximum pressure 16 bar

Capacity: 100 L Max pressure: 11 bar Permissible temperature range: -10°C to 100°C

The EASYSOFT SXT2 consists of a plastic softener tank with internal water distributors. In the integ (more)rated salt storage vessel, brine is automatically prepared for the resin regenerations. Furthermore, the EASYSOFT SXT2 is equipped with an integrated double 3-way bypass valve for decommissioning the water softener while preserving the water supply. On the SXT2 version of this model, a fully automatic control valve (with built-in microprocessor) is mounted on the tank. This ensures the regeneration of the resin. The EASYSOFT SXT2 is also equipped with a mixing device integrated in the control valve to set a residual hardness. The regeneration of this microprocessor controlled water softener can be done in three ways: volume, time and a combination of the two. Capacity: 450 l/h Period capacity (at 10 °dH) min/max: 2.0/3.4 m3 Salt consumption per complete regeneration min/max: 0.7/2.2 kg Resin content per tank: 9 l Salt container content: 25 kg Required water pressure min/max: 2.0/7.0 bar Dimensions (WxDxH): 262 x 463 x 640 mm

Edwards acoustic enclosures provide soundproofing for your pump operations in laboratories or sensit (more)ive industrial work environments. High noise absorption materials reduce pump noise by up to 9 dB (A), without adversely affecting your vacuum pump efficiency. A integrated air-cooling fan provides ventilation to maintain your optimum pump running temperature.

Temperature range: -5ºC to 100ºC Storage for 4 temperature programs Forced convection Internal dimen (more)sions (H x W x D): 480 x 600 x 390 mm Dimensions (H x W x D): 925 x 850 x 620 mm

Recovery time after 30 seconds door open at 37°C: 5 min Temperature fluctuation at 37°C: ±0.1K Tempe (more)rature range: 7°C above ambient temperature to 60°C Temperature variation at 37 °C: ±0.4 K Auto-sterilization with hot air at 180°C Humidity range: 90 to 95% RH Double-pan humidification system with condensation protection CO₂ measurement: IR CO₂ range: 0 to 20 Vol.-% CO₂ CO₂ Recovery time after 30 seconds door open at 5 Vol.-% CO₂: 5 min Dimensions (H x W x D): 1070 x 740 x 715 mm Internal dimensions (H x W x D): 750 x 560 x 500 mm Capacity: 210 litre Weight: 129 kg

Temperature range: Ambient +4°C to 50°C Temperature control increment: 0.1°C Temperature accuracy (a (more)t 37°C): ±0.4°C Temperature stability (at 37°C): ±0.1°C Temperature uniformity (at 37°C): ±0.3°C CO2 range: 0.1 -  20% CO2 control increment: 0.1% CO2 accuracy (at 5% CO2): ±0.3% CO2 stability (at 5% CO2): ±0.1% CO2 uniformity (at 5% CO2): ±0.1% Inner door with 4 segments (for minimal CO2 loss) Humidity 95% at 37°C via 2.5 L water tray Number of shelves: 4 Maximum shelf load: 10 kg Maximum load: 40 kg Capacity: 167 L Dimensions (BxHxD): 718 x 900 x 715 mm Internal dimensions (BxHxD): 539 x 692 x 445 mm Weight: 113 kg

The Synergy Water Purification System is fed with pretreated water (Elix, RO, distilled or DI water) (more) coming from a tank or a loop. When Product Water is being dispensed, the Inlet Solenoid Valve opens and the Booster Pump turns on. The pretreated water is then pumped into the UV Lamp (UV System). The UV Lamp emits light at 185 nm and 254 nm. It is used to reduce levels of organic molecules in the water. The UV Lamp is a consumable device that needs to be periodically replaced during the maintenance of the system. The water is then sent to the SynergyPak cartridge to deionize the water. There are three types of SynergyPak. SynergyPak 1 is used for RO, distilled or Elix feedwater. SynergyPak 2 is used for pretreated water from clean DI (particulate-free). SynergyPak 3 is used for pretreated water from dirty DI (non particulate-free). The SynergyPak is a consumable device that needs to be periodically replaced during the maintenance of the system. The Final Filter is a membrane based filter that  removes all particles and bacteria with a size greater than the filter pore size. The Final Filter is a consumable device.