General laboratory equipment

The STX44-HRSA is designed for integration where the instrument is located on the floor. The STX44-H (more)RSA incubators have their handling and climate controls on the lower part of the instrument. The robotic access Gate is located in the upper part of the housing. The SA configuration does not require table space and an SA configured StoreX can easily be put in position without the need of placing the unit on a table. Application: Humid MultiRange Temperature Range: 4 – 50/70°C (depending on humidity) Temperature Stability: ± 0.3°C Relative Humidity: 90 – 95% Communication: RS232 V24, 9600 Baud, ASCII Dimensions (WxDxH): 485 x 514 x 1230 mm Transfer height: 1000 mm Plate capacity: Microtiter 44, Deep well 18, Nanoliter 84

The ES is an intuitive overhead stirrer ensuring safety with overload, over-current and overheating  (more)protection. Easy to install, resistant and with a small footprint, ES is your best choice for low viscosity samples. Velp ES ensures a smooth start and vigorous agitation even at maximum speed. ES can reach speeds of 1300 rpm and stir up to  15 litres. The device can manage viscosity, with a maximum of  1000 mPas. The easy chuck is easy to close and can accommodate shafts with up to 10 mm diameter and does not require any tool. Stirring speed: 50 – 1300 rpm Maximum stirring volume (H2O): 15 liters Maximum viscosity: 1000 mPas Maximum torque: 15 Ncm Construction material: technopolymer Chuck hole range: 1 – 10 mm Dimensions (WxHxD): 80 x 160 x 200 mm Weight: 1.3 kg

Maximum stirring quantity (H2O): 15 l Speed: 50 – 2000 rpm Setting accuracy speed: ±1 rpm Deviation  (more)of speed measurement (>300rpm): ±1 % Deviation of speed measurement (<300rpm): ±3 rpm Maximum viscosity: 10000 mPas Maximum torque at stirring shaft: 20 Ncm Nominal torque: 0.2 Nm Deviation of torque measurement: ±3 Ncm Torque measurement: trend Time setting range: 0 – 6000 min Connection for external temperature sensor: PT1000 Temperature measuring range: -10°C – 350°C Temperature measurement resolution: 0.1 K Dimensions (WxHxD): 70 x 193 x 154 mm Weight: 1.56 kg Equipped with: R 1342 4-bladed propeller stirrer Standard stirring element. For drawing the material to be mixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds. Stirrer Ø: 50 mm Shaft Ø: 8 mm Shaft length: 350 mm IKA tripod scale A stand with an integrated scale and data interface. The IKA scale provides increased comfort and safety for your laboratory applications. For example, your stirrer can hang on the stable support rod. The quantities of samples to be added are weighed immediately and continuously documented during the stirring process. Sample weight of up to 6 kg The intelligent tripod scale has a weighing range of up to 6 kg with a resolution of 1 g. It is therefore particularly suitable for the direct and controlled addition of sample material while stirring. Weighing range: 5 – 6000 g Weighing accuracy: ±6 g Plate dimension: 200 x 200 mm Dimensions (WxHxD): 213 x 570 x 391 mm Weight: 5.2 kg

Exact temperature setting via digital potentiometer Simultaneous digital display of target and actua (more)l temperatures via LCD display Actual temperature displays in medium with 0.1°C resolution when using PT1000 temperature sensor (included) Stirrer can be controlled with two microcontrollers (not included) Plate material: Glass ceramic Plate dimensions: 180 x 180 mm max. stirring capacity (H₂O): 10 L Speed range: 100 – 1500 rpm Dimensions (WxDxH): 215 x 330 x 105 mm Temperature range: 50°C to 500°C Weight: 5 kg

General purpose shaker with microprocessor control, ideal for basic mixing applications, staining te (more)chniques, staining and bleaching. Variable speed control provides a consistent, uniform shaking action. The speed is adjustable via a knob with 1 to 10 rotary knobs and the ramping function slowly increases the speed to the set point for added safety. Suitable for continuous use To be used at 0 to +40 °C (maximum 80% relative humidity, non-condensing), in an incubator, CO₂ incubator or cold store. Speed: 40 – 300 rpm Shaking motion: Circular motion Amplitude: 15 mm Platform (WxD): 222 x 299 mm Maximum load: 3.6 kg Dimensions (W×D×H): 280 x 430 x 102 mm Weight: 10 kg

Connections: cold water, hot water, demineralized water

Temperature settings: -15°C/-18°C/-21°C/-25°C/-32°C Dimensions (HxWxD): 1840 x 600 x 660 mm Drawer i (more)nternal dimensions (HxWxD): 175 x 430 x 395 mm Capacity: 254 L

Slanted electrical front window Plugged holes in side windows Double socket UV light with magnetic f (more)astening Air flow: 0.45 m/s Recirculation air volume: 965 m3/h Exhaust air volume: 383 m3/h Total air volume: 1348 m3/h Dimensions (WxDxH): 1280 x 840 x 1380 mm Internal dimensions (WxDxH): 1190 x 600 x 665 mm Support frame height: 800 mm Weight: 281 kg

The screen of the display, provide intuitive and practical colour codes which immediately show the c (more)abinet status: • Green screen: Cabinet in safe condition • Red screen: Cabinet out of specification • Yellow screen: Cabinet being decontaminated The main screen provides a visual display of the laminar flow speed and filter clogging. The Ecomode function allows the cabinet to run at low speed in one single click, in order to protect the sample while the operator is doing other tasks. This saves energy, reduces sound level and heat emission. Other features of the display: • Constant information on the air flow status: – Laminar flow speed – Extraction rate – Inflow speed • A timer to program the daily activation of fans and UV light • Two password levels (user and technical service) • Acoustic and visual alarms with an information message: – Excessive or insufficient laminar flow speed – Insufficient exhaust rate – Glass away from the working position – Open front window – UV lamp activated (interlocked with the front closed position) Laminar flow speed: 0.35 m/s Laminar flow rate: 1310 m3/h Front entry air speed: 0.5 m/s Extraction flow rate: 564 m3/h Lighting: > 1000 Lux Sound: < 58 dBA Vibration: < 0.005 mm RMS. Filters: HEPA/ULPA H14 filters. Digital display with PIN password for menu settings box. 2 electrical connections left/right. Dimensions (WxDxH): 1964 x 759 x 1260 mm Internal dimensions (WxDxH): 1869 x 602 x 580 mm Support frame height: 900 mm Weight: 280 kg

HEPA filtered horizontal laminar airflow (crossflow) creates an ISO Class 5 (14644-1) / GMP Class A  (more)(Annex 1) work area and prevents ambient air from entering the work area, ensuring product protection. Horizontal velocity: 0.45 m/s Light intensity: > 1000 Lux Pre-filter (ISO 16890 (former G3: EN779)): Coarsefilter Horizontal HEPA filter (EN 1822-1): H14 Dimensions (WxDxH): 1880 x 893 x 1153 mm Interior dimensions (WxDxH): 1859 x 570 x 736 mm Height support frame: 800 mm Weight: 190 kg

Dimensions (HxWxD): 1380 x 1280 x 790 mm Internal dimensions (HxWxD): 655 x 1190 x 600 mm Height bas (more)e: 800 mm Air volume recirculation: 887 m3/h Air volume exhaust (at 0,45 m/s): 363 m3/h Air volume total: 1250 m3/h Standard lighting: 2 x 36 W Light level up to 2500 Weight including base: 240 kg Including new filters

Thermo Scientific MSC-Advantage Class II Biological Safety Cabinets (BSCs) combine safety and extrao (more)rdinary value with energy efficiency, reliability and usability. With proprietary airflow design and energy-efficient DC motors, the MSC-Advantage BSCs use up to 68% less energy than cabinets with traditional AC motors. The cabinets provide both personal and product protection from biological hazards and contamination while affording users with a comfortable and ergonomic workspace. Cabinets are certified to EN 12469 safety standard. Certifications/Compliance: EN 12469, by TüV Nord, LNE (0.9 and 1.2m). EN 12469, by TüV Nord (1.5 and 1.8m) Noise Level: <59 dBA Exhaust Air Filter: HEPA H 14 EN 1822, 99.995% at 0.3 µm Particle Dimensions (WxDxH): 1900 x 800 x 1520 mm Interior dimensions (WxDxH): 1800 x 780 x 465 mm Including support frame

Dimensions (WxDxH): 1800 x 800 x 750 mm

Temperature range: -9°C to -30°C Defrost system: Automatic Cooling system: Static Capacity: 360 L Di (more)mensions (HxWxD): 1910 x 700 x 780 mm Internal dimensions (HxWxD): 1587 x 420 x 400 mm Weight: 94 kg

Temperature range: -20ºC to 100ºC Internal dimensions (DxHxW): 100 x 100 x 100 mm Dimensions (DxHxW) (more): 500 x 235 x 505 mm

Explosion-proof laboratory freezer with plastic drawers Dimensions (WxDxH): 597 x 615 x 820 mm Capac (more)ity: 129 l Temperature range: -9°C to -26°C

The 2800 Dispensing System brings positive displacement technology to applications that require prec (more)ise metering of assembly fluids that change viscosity or where a specific flow rate is necessary. Unique patented technology within the system uses a flexible drive cable driven by a powerful stepper motor, to apply consistent dots or beads of virtually any assembly fluid. The heavy-duty motor is contained within the benchtop controller, keeping the handheld reservoir system lightweight and easy to use. For setup, the operator can use a menu-driven touch pad to set deposit volume (as small as 0.1 microliter), flow rate and other specific criteria. After initial setup, there is no need to recalibrate or reset the system due to changes in fluid viscosity or reservoir volume. Highly repeatable, precise fluid control No need to recalibrate during operation All electric; does not require shop air Programmable pullback eliminates drooling All digital, multi-function display with readouts of deposit volume, rate, shot count, and more 100 user-defined memory cells that store shot volume, syringe barrel size, pullback, dispense rate, and pause

Eddy Jet 2 reduces costs per test, hands on time, and consumable use during counts while increasing  (more)microbiology lab’s productivity. This cutting-edge spiral plater automates, standardizes and streamlines plate inoculations with its patented cross-contamination-free technology. Microsyringes give the system unique, unmatched advantages that make it a bestseller. The user interface is very intuitive and there are no setup times. Although Eddy Jet 2 is mostly used by food, cosmetic and pharmaceutical labs, any microbiology lab can greatly benefit from its use. This instrument will generate a threefold dilution concentration gradient on a single plate, allowing labs to skip serial dilutions and most platings. Each sample is processed with a brand new sterile microsyringe, making sample handling a cross-contamination-free process. Other than bacterial counts, antimicrobial susceptibility testing (AST) and mutagenicity test applications are also available. Reproduceerbaarheid: > 99% Tijd voor een volledige cyclus: 30 s (wegwerpspuiten maken desinfectie overbodig) Opgeslagen strooimodi: 25 strooimodi (37 inclusief die voor petriplaten van 150 mm) Bewegingsbesturing: 3 microcontroller-geregelde stappenmotoren Petriplaatdiameters: 90 en 150 mm Minimaal stapvolume: < 10 nl Maximaal gepipetteerd volume: 100 μl Materiaal spuit: polypropyleen Materiaal plunjer: polyethyleen H.D. Automatische controle: geprogrammeerd voor 6 regio’s Externe balansaansluiting: Serieel RS232 DB9 Printeraansluiting: Serieel RS232 DB9 Barcodescanneraansluiting: Specifieke aansluiting voor IUL-barcodescanner Aansluiting voor updates: Ethernet/USB-stick Extra aansluitingen voor randapparatuur: 4 x USB Host-poorten Afmetingen (BxHxD): 515 x 420 x 500 mm Gewicht: 20 kg

DNA/RNA UV-cleaner box UVC/T-M-AR is designed for clean operations with DNA samples. UV-cleaner box  (more)provide protection against contamination. Model is a bench-top type, made of metal framework, glass walls, working surface made of stainless steel. UV-cleaner boxes are equipped with an open UV lamp installed in the upper hood. UV-radiation from the open lamps disinfects the working area inactivating DNA/RNA fragments during 15–30 min of exposure. A digital timer controls duration of the direct UV irradiation. A daylight lamp provides proper illumination of the working surface. UV-cleaner boxes are equipped with a flow-type bactericidal UV cleaner–recirculator AR, which provides constant decontamination inside the box during operation. They are recommended for operations with DNA/RNA amplicons. UV cleaner–recirculator AR consists of a UV lamp, a fan and dust filters organized in a special body so that a user working with a UV-cleaner box is protected against UV light. Recirculator increases the maximum density of UV light making it  sufficiently effective for DNA/RNA inactivation. The UV–recirculator processes 100 UV-cleaner box volumes per hour, creating permanent aseptic conditions of operation inside the UV-cleaner box. Advantages of Biosan UV-cleaner boxes: Ozone free high density UV decontamination Long living UV lamps (9,000 hours average) Automatic switch off of UV-lamps when the protective screen is opened Bactericidal flow-type recirculator providing permanent decontamination inside UV –cleaner box during operation Shockproof glass walls Low noise, low energy consumption Walls material: Rear: stainless steel Sides and front: glass (EUROGLASS, Germany) Working surface material: Stainless steel Open UV-lamp: 1 x 25W built‑in bactericidal UV-C, TUV 25W 1SL/25 UV radiation level: 18 mW / cm2 / sec Radiation type: UV (λ = 253.7 nm), ozone-free Digital time setting of direct UV exposure: 1 min–24 hrs / non–stop (increment 1 min) UV-recirculator: 1x25W (efficiency >99% per 1 hour) Daylight lamp (for working area illumination): 1 x TLD-15W Thickness of side panels: 4 mm Thickness of upper front panel: 8 mm Thickness of screen: 4 mm Optical transmission: 95% UV protection: >96%, UV-protection film Working area: 645 × 490 mm Opening dimensions (fully raised protective screen): 645 × 190 mm Safety features: Automatic open UV-lamp switch off when screen is open Power outlets inside the unit: Inlet for power cords and 1x Built-in socket, max. 1000 W Overall dimensions (WxDxH): 700 x 580 x 555 mm Weight: 28.8 kg

Speed range: 100 – 1400 rpm Max. stirring capacity (H₂O): 20 L Plate dimensions: Ø 145 mm Dimensions (more) (WxDxH): 173 x 277 x 94 mm Weight: 2.6kg

The FP403 + FP404 model is an analyzer specially designed for in-line oxygen and CO2 measurements on (more) both horizontal and vertical flow packaging machines. Very easy to use and adapt to any mounting configuration.

Temperature range: -5°C to -25°C Control unit: Gram Control Unit with voltage free contact, alarms a (more)nd offset function Alarms: Acoustic and visual, High/Low temperature alarms and door alarm Access port: 1 pcs. Ø 24.5 mm Defrost system: Automatic smart defrost with re-evaporation of the defrost water Dimensions (WxDxH): 600 x 731 x 2000 mm Net volume: 303 litres Net weight: 112 kg

Temperature range: 2°C to 15°C Dimensions (HxWxD): 2115 x 700 x 830 mm Internal dimensions (HxWxD):  (more)1570 x 530 x 650 mm

Dimensions (WxDxH): 900 x 600 x 830 mm

Wall cabinet consisting of 4x sliding door and 1x double door cabinets Dimensions (WxDxH): 5560 x 73 (more)0 x 1280 mm

Meet your lab’s specific needs with outstanding flexibility and performance with the easy-to-use The (more)rmo Scientific MultiDrop Combi Reagent Dispenser, designed to support the varied requirements of pharmaceutical and biotechnology laboratories. It combines the most versatile features for reagent dispensing with excellent performance for drug discovery or genomic and proteomic assays. Dispensing volume: 0.5 to 2500µl Dimensions (WxDxH): 360 x 330 x 220 mm Weight: 9 kg

Dimensions (WxDxH): 600 x 470 x 600 mm

Air capacity: 800 m³/h Evaporation capacity: 60 L/24h Recommended room size: 900 m³, 360 m² Water re (more)servoir: 29 L Dimensions LxWxH): 316 x 625 x 720 mm Weight: 19 kg

Meet your lab’s specific needs with outstanding flexibility and performance with the easy-to-use The (more)rmo Scientific MultiDrop Combi Reagent Dispenser, designed to support the varied requirements of pharmaceutical and biotechnology laboratories. It combines the most versatile features for reagent dispensing with excellent performance for drug discovery or genomic and proteomic assays. Dispensing volume: 0.5 to 2500µl Dimensions (WxDxH): 360 x 330 x 220 mm Weight: 9 kg