General laboratory equipment

Interfurn Door Cabinet, RT Creme 600x600x490

Interfurn Door Cabinet (Sink) Creme

Dimensions (WxDxH): 600 x 490 x 600 mm

Potteau Electric Bridge 3 Meter

S+B Pass-Through Glass Sliding Door White 1200x340x450

S+B Hanging cabinet D. Gray 1200x330x600

External dimensions (WxDxH): 1196 x 616 x 1968 mm Internal dimensions (WxDxH): 1050 x 524 x 1742 mm  (more)Weight: 483 kg Min. quantity of exhaust air 10 times: 10 m³/h Pressure difference at 10 times: 5 Pa Differential pressure at 10-fold EK5/AK4: 5 Pa Floor load: 528 kg/m² Maximum load: 600 kg Max. load tray: 60.00 kg Collecting capacity bottom sump tray: 29 litres

15 stirring positions, 100% maintenance-free and wear-free by inductive 2mag-Magnetic-Drive concept  (more)for powerful mixing of solutions, power reserves up to 3,000 ml per stirring point, 100% synchronized speeds, jerk-free stirring even at low speeds. Fully encapsulated and hermetically sealed stainless steel housing, IP68, water-, dust-, and germproof, extremely robust construction and performance, easy to clean and maximum resistance, submersible in water- resp. oil baths, suitable for the use in CO2-incubators and ovens. Stirring points: 15 Stirring point distance: 65 mm Stirring volume/stirring point: 1 – 3000 ml Speed range: 100 – 1,600 rpm Stirring power (max.): 40 W Material housing: Stainless steel Permitted operation conditions HT-version:  up to +200°C in air, up to +95°C in water submerged Dimensions (WxDxH): 245 x 375 x 38 mm Weight: 9.5 kg

Principle: Any positive and untouched isolation can be performed to separate target cells from PBMCs (more), cultured cells, and dissociated tissue. In addition, cells can be directly isolated from whole blood or bone marrow using StraightFrom Whole Blood MicroBeads. Overall more than 400 different MicroBeads and Isolation Kits are available. Upon automated separation, labeled cells as well as non-labeled cells are obtained and can be used for a variety of downstream applications such as functional and molecular assays, chimerism analysis, and flow cytometry. To ensure cell viability and integrity, cells are kept cooled in Chill Racks. Monitoring: Pre-set programs for all MACS MicroBeads and Isolation Kits ensure accurate sample handling. Sensors constantly monitor the status of the autoMACS Pro, buffer levels, and column status. This ensures optimal instrument performance and safety of samples and operators. Footprint: With MiniSampler: 605×455 mm (W x D) Height: 392.5-454 mm (adjustable touchscreen) It is a benchtop-sized instrument that will easily fit under a common laminar flow hood. Included Chill Racks: The Chill Racks are pre-cooled in the refrigerator (2–8°C). The special coolant contained in the racks switches from fluid to solid at 8°C and maintains a low temperature until the coolant is completely melted. The phase switch is visible. Do not cool racks below 0°C as cell samples may freeze! 1x Reagents rack 1x Chill 5 Rack: contains 24 slots for 5 mL tubes and can be used for cell separations of up to 6 samples. 4x Chill 15 Rack: contains 15 slots for 15 mL tubes and 5 slots for 5 mL tubes. It can be used for cell separations of up to 5 samples. 1x Chill 50 Rack: contains 6 slots for 50 mL tubes, 3 slots for 15 mL tubes, and 3 slots for 5 mL tubes. Up to 3 cell samples can be handled with a Chill 50 Rack.

The Siemens KT16RVW30 is a table-top refrigerator with a surprisingly large capacity of 152 liters.  (more)Dimensions (HxWxD): 850 x 600 x 610 mm Net capacity: 152 l

Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program:  (more)60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Adjustment range O₂: 1 to 20% Setting accuracy O₂: 0.1% Max. number of internals: 10 (3 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

The appliance is intended for the creation and maintenance of constant environmental conditions for  (more)application in the field of in vitro fertilisation (IVF), especially for the incubation of oocytes, spermatozoa and zygotes in special culture dishes for IVF application as well as for gene expression and the biosynthesis of RNA and proteins. Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program: 60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Max. number of internals: 10 (2 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

Max. pumping speed at 50 Hz: 1 m³/h Ultimate pressure: < 100 mbar Sound level: < 45 dB Dimensions (W (more)xDxH): 144 x 198 x 244 mm Weight: 2.7 kg

Modes DOS: Dosing with the ability to calculate a result from dosed volume DIS R: Repetitive dispens (more)ing DIS C: Cumulative dispensing PIP: Pipetting DIL: Diluting CNT D: Preparation of solutions with preselected content Volume of buret cylinder: 10 ml Resolution: 10 000 steps per buret cylinder Dispensing time for 100% burette volume: Analogue – 20 s to 17 min, Digital – 20 s to 17 h Dimensions (WxHxD): 240 x 450 x 275 mm Weight: 5.2 kg

Temperature range: Ambient +5°C to +70°C Capacity: 57 liters Dimensions (WxDxH): 750 x 610 x 550 mm  (more)Internal dimensions (WxDxH): 405 x 370 x 380 mm

testo 110 Thermometer 0560 1108 with Waterproof probe (NTC) 0613 1212 0560 1108 Highly accurate even (more) at very low ambient temperatures, such as in cooling rooms Optional: connectable sensor and wireless sensor for various applications Audible alarm, adjustable limit values HACCP certified according to EN 13485 for use in the food sector Dimensions: 182 x 64 x 40 mm Operating temperature: -20 … +50 ° C Housing: ABS Number of Channels: 1 channel Battery Type: 9V battery Storage temperature: -40 … +70 ° C Weight: 171 g 0613 1212 – Waterproof immersion/penetration probe (NTC) with fixed cable 1.2m NTC temperature sensor Waterproof Measuring accuracy of up to ±0.2 °C Measuring range: -50 to +150 °C This unit is in excellent working condition and very clean cosmetically. Feel free to contact with any questions.

Motion: reciprocating (horizontal) Shaking platform: 400 x 300 mm Max. load: 15 kg Shaking speed: 30 (more) – 420 rpm, in steps of 5 Stroke: 17 mm Runtime: programmable / continuous Dimensions (WxDxH): 510 x 490 x 150 mm Weight: 19 kg

High-performance ultrasonic cleaner with heating for use in the practice, laboratory and workshop. T (more)he proven and particularly robust SONOREX ultrasonic baths clean thoroughly and gently by means of intensive cavitation bubbles, even in the hard-to-reach places of the cleaning objects. A user-friendly rotary handle control is used for easy setting of the cleaning time and bath temperature. The fully automatic SweepTec function prevents standing waves in the ultrasonic field and achieves particularly even cleaning. Ultrasound frequency: 35 kHz Temperature setting: 30°C – 80°C Time setting: 1-15 min, continuous operation Capacity: 45 L Work content: 30 L Level marking: yes Tub material: Stainless steel V2A (1 4301) Tub thickness: 2 mm Inner dimension (LxWxH): 500 x 300 x 300 mm Dimension (LxWxH): 540 x 340 x 500 mm Included Cover: A suitable stainless steel lid for an ultrasonic bath protects the bath fluid from external contamination and prevents odour nuisance caused by the added cleaning or disinfecting preparations. In addition, the noise emission that may be perceived as annoying during operation of the ultrasonic cleaner is reduced. The lids are designed in such a way that any condensation water that arises is led back into the tank. Hanging basket: For holding sound reinforcement material; made of stainless steel. During ultrasonic operation, nothing may be placed on the bottom of the tank, as abrasion may occur between the material to be sonicated and the ultrasonic oscillating tank. It is therefore recommended to use a suitable basket to hold the sonication material. The BANDELIN baskets are designed in such a way that the material to be sonicated is always in the optimum area of the cavitation field (1-2 cm from the floor) in the oscillating tank. With the help of a basket, the sonication material can also be conveniently placed in the unit and removed after operation, e.g. for rinsing, without the user coming into contact with the sonication fluid in the oscillating tank. Sieve holder: For cleaning test sieves in an ultrasonic bath; stainless steel. During ultrasonic operation, nothing may be placed on the bottom of the tank, as abrasion may occur between the material to be sonicated and the ultrasonic oscillating tank. It is therefore recommended to use a suitable basket to hold the sonication material. The BANDELIN baskets are designed in such a way that the material to be sonicated is always in the optimum area of the cavitation field (1-2 cm from the floor) in the oscillating tank. With the help of a basket, the sonication material can also be conveniently placed in the unit and removed after operation, e.g. for rinsing, without the user coming into contact with the sonication fluid in the oscillating tank. Insert strip: The insert strip is used to hold the insert vessels. When using chemically aggressive liquids (e.g. TICKOPUR J 80 U), removing chemically aggressive or abrasive contaminants or sonicating sample liquids, insert cups are used (indirect sonication). Because nothing may be placed on the bottom of the ultrasonic bath. Another advantage: When using an insert strip, several insert beakers can be sonicated with different liquids at the same time (e.g. removal of dental cements with STAMMOPUR Z in one and cleaning with simultaneous chemical disinfection of dental instruments with STAMMOPUR DR 8 in a second insert beaker). Please note that the surface tension of the water must be reduced in order to transfer the ultrasound to the insert vessel and therefore a cleaning solution (e.g. TICKOPUR R 33 – 3%) must be used as a coupling liquid / contact liquid.

Dimensions (WxDxH): 1500 x 800 x 710 mm

Leica 2035 BioCut Microtome its the perfect manual microtome if your applications involve routine se (more)ctioning of paraffin or plastic-embedded specimens. You can be assured stability when operating the Leica BioCut 2035 Microtome thanks to the vertical guide-way, the rigidity of the feed-system as well as the a built-in specimen retraction feature. The combination of these features along with a mechanical trimming device should make the Leica 2035 the ideal microtome for manual sectioning. Section range: 1 – 60 µm Trimming at 15 an 30 µm Smooth hand-wheel rotation Easy Specimen cassette orientation Low/High profile disposable blades holder

Digital block heater for two aluminum blocks provides precise temperature control in small vessels.  (more)Included PT-1000 temperature sensor allows temperature control directly in the sample vessel. The block heater is ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood-urea-nitrogen determinations and in situ hybridizations. Stepless adjustable temperature up to 120°C Timer: Countdown, adjustable from 1 min to 99h 59min Counter: Display of heating time Highly versatile with a large number of blocks Error code display Fixed safety circuit Acoustic signal at end of test Number of blocks: 2 Heat output: 250 W Heating temperature range: Ambient +5°C to 120°C Temperature display: yes Adjustment and display resolution: 1 K Connection for ext. temperature sensor: CT (DIN12878) PT 1000 variation;DIN EN 60751 Kl. A: ≤ ± (0.15 +0.002xITI) K Temperature stability within the blocks at 37°C: ±0.2°C Temperature stability within the blocks at 60°C: ±0.4°C Temperature Homogenity at 37°C: 0.2 K Temperature Homogenity at 60°C: 0.4 K Heatingrate / Heat up time with external sensor: 4.5 K/min Set-up plate material: Aluminium alloy Set-up plate dimensions: 96 x 152 mm Fixed safety circuit: 150°C Timer: yes Time setting range: 1 – 5999 min Dimensions (WxHxD): 151 x 73 x 304 mm Weight: 1.724 kg Blocks included: 1x DB 1.2: Used for Eppendorf microtubes (1.5 ml) Pore size: Ø 11.5 mm No. of holes: 20 Hole depth: 36.9 mm Dimensions (WxDxH): 95 x 76 x 51 mm 2x DB 5.1: Used for 12 mm vials Pore size: Ø 12.7 mm No. of holes: 20 Hole depth: 30.0 mm Dimensions (WxDxH): 95 x 76 x 51 mm 1x 13.9: Used for round bottom tubes (12/13 mm) Pore size: Ø 13.7 mm No. of holes: 16 Hole depth: 48.4 mm Dimensions (WxDxH): 95 x 74 x 51 mm

Dimensions (HxWxD): 2060 x 1400 x 620 mm

The ClonePix FL builds on the success of the Genetix white light ClonePix adding fluorescent imaging (more) capabilities for more intelligent selection. The unique proprietary technology behind ClonePix FL represents a major advance in cell line selection and development, significantly reducing the time and costs associated with new biopharmaceutical product development especially when compared to standard techniques such as limited dilution or cell sorting. Specification: White light imaging- Trans-illumination for imaging low contrast colonies such as adherent monolayers or small colonies in suspension. Epi-illumination for imaging colonies as they are collected Fluorescence imaging- Software-controlled switching between up to 5 excitation /emission filter pairs (we recommend no more than 3 filters be multiplexed for optimal performance) Data tracking- Internal barcode reader for source and destination plates enables data tracking for each run Camera- Integrated 16-bit cooled CCD camera Imaging speed- 6-well microplate: 5 min for 2 wavelengths (standard conditions) Resolution- Standard: 28 micron; Maximum: 1.5 micron Containment- Fully enclosed working environment with Class 100-type, HEPA filtration Source plate type- PetriWell-6 plate, PetriWell-1 plate, Greiner 6 well plate, Nunc 6 well plate, Nunc OmniTray Destination plate type- PetriWell-96 plate, Costar 96 well plate, Greiner 96 well plate, Nunc 96 well plate, Falcon 96 well plate Source plate capacity- 10 plates Destination plate capacity- 10 plates Picking head- 8 x picking pins – each pin independently controlled Picking pin size- Diameter of picking pins is application specific – F1: suspension cells, F2: adherent cells Picking speed > 200 clones per hour Wash bath- Ethanol wash bath, automatically refilled Picking system fluids- 5 L sterile water supply, 5L waste bottle Pin drying- Proprietary halogen pin drying station

Diagenode’s Bioruptor Pico uses a gentle method of sonication to retain the integrity of DNA and/or  (more)biological complexes, including chromatin, protein-protein binding, proteinDNA complexes and other biochemical and biological assay systems. The Bioruptor Pico sonication system uses a sonication bath to generate indirect sonication waves, which emanate from an ultrasound element below the water tank. Because the system is gentler than other sonicators, the Bioruptor Pico produces better and more consistent results than with harsher sonication methods. Up to 16 closed tubes can be sonicated in parallel and the continuous rotation of tubes allows even distribution of the energy for efficient sonication. The Bioruptor Pico enables automation of sonication, guaranteeing higher reproducibility of results. Ultrasonic wave frequency: 20 – 60 kHz Ultrasonic wave output power: 25 – 210 W Sonication unit dimensions (WxDH): 350 x 245 x 280 mm Sonication bath volume: 750 ml Timer: Digital Possibility to control water flow via connector kit for Bioruptor Cooler: Yes (included) Tube holder: Available for 0.1, 0.65, 1.5 or 15 ml tubes Total weight: 7,90 kg Number of samples to be processed simultaneously: 0.1 ml tubes – 12 samples 0.2 ml tubes – 16 samples 0.65 ml tubes – 12 samples 1.5 ml tubes – 6 samples 15 ml tubes – 6 samples

Compact design Rotisserie and rocker in one unit Up and over door for accessibility Accurate tempera (more)ture control Advanced safety features Variable speed control The incubator has a stainless steel interior, whilst the door is constructed from a double glazed panel of smoked acrylic and polycarbonate to provide radiation protection. The `up and over’ door mechanism gives excellent access to the incubator.

Series 3 digital force gauges are designed for tension and compression force testing in numerous app (more)lications from 0.5 N to 500 N. The gauges feature a sampling rate of 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges’ features and configurable parameters. USB output is provided for data collection purposes. Set point indicators are provided for pass-fail testing. The gauges are overload protected to 200% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. An ergonomic, reversible aluminum housing allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 3 digital force gauges are directly compatible with Mark-10 test stands, grips, and software.