Teledyne Isco equipment
We personally find you the right used, refurbished & new Teledyne Isco instruments & equipment from verified suppliers
Teledyne ISCO is an American laboratory and environmental instrument manufacturer specializing in chromatography, syringe pumps, water and wastewater samplers, and flow meters. The company began in 1958 as ISCO, Inc., founded by Dr. Robert Allington in a Lincoln, Nebraska garage, and became Teledyne ISCO in 2004 when Teledyne Technologies acquired it. Its product families include CombiFlash and RediSep flash chromatography, ACCQPrep preparative HPLC, Foxy fraction collectors, and D-Series syringe pumps. On Questpair, used Teledyne ISCO instruments are listed by verified suppliers and distributors across several European countries.
Updated:
Teledyne Isco product list
Not the exact instrument you need?
Tell our scientists what you are after. We track it down, including off-market supply.
About Teledyne Isco
Teledyne ISCO is an American laboratory and environmental instrument manufacturer specializing in chromatography, syringe pumps, water and wastewater samplers, and flow meters. The company was founded in 1958 as ISCO, Inc. by Dr. Robert Allington, who grew it from his garage in Lincoln, Nebraska into a major instrument maker. In June 2004 it was acquired by Teledyne Technologies Incorporated and became Teledyne ISCO, retaining its Lincoln base. Its primary categories span flash chromatography systems, preparative HPLC, syringe pumps, reciprocating pumps, water and wastewater samplers, open-channel flow meters, and fraction collectors. The best-known product families are CombiFlash, RediSep, ACCQPrep, Foxy, ReaXus, and the D-Series. The brand is unusual in serving both the analytical bench and the environmental field from a single catalogue. On Questpair, its instruments are listed exclusively as used units by verified suppliers and distributors.
Teledyne ISCO product lines
The chromatography side of the range begins with CombiFlash, the automated flash chromatography platform, used with RediSep disposable cartridges that set the stationary phase for a given separation. Flash chromatography is the routine purification step in synthetic chemistry, where a crude reaction mixture is resolved into its components, and the automated form removes the manual fraction-watching that the technique once demanded. The ACCQPrep line carries the same logic into preparative HPLC, the higher-resolution chromatography used to isolate milligram-to-gram quantities of a single compound. Foxy fraction collectors sit at the end of either workflow, directing the eluent into individual vessels as each peak comes off the column. Together these support small-molecule purification, natural-product isolation, and the compound libraries that feed medicinal chemistry and proteomics sample preparation.
The pumping lines serve a different need. D-Series syringe pumps deliver a continuous, pulse-free flow at high pressure, which makes them suited to supercritical fluid chromatography and extraction, to pump calibration, and to any molecular biology or formulation protocol that cannot tolerate a pressure ripple. ReaXus reactant feed pumps are built for metering reagents into continuous-flow and automated reaction systems, a pattern now common in flow chemistry and in bioprocessing feed control. Reciprocating pumps round out the delivery range for higher-throughput, lower-pressure duties.
The environmental lines stand apart from the laboratory instruments. Water and wastewater samplers collect timed or flow-proportional samples autonomously in the field, feeding molecular diagnostics and microbiology workflows that test for contaminants and pathogens, and the open-channel flow meters measure discharge in sewers, culverts, and natural watercourses. These instruments are the backbone of regulatory water monitoring and are also used for wastewater-based epidemiology, where sampled effluent is screened for genetic markers of disease across a population.
What Teledyne ISCO equipment is listed on Questpair?
The Questpair catalogue holds 74 listings for this maker, offered by 6 verified suppliers and distributors across 4 countries. 100 percent of the listings are used. Prices run from EUR 65 to EUR 26.754, with an average near EUR 10.273. That range mirrors the breadth of the product families: the low end covers cartridges, fraction-collector racks, and accessories, while the high end reflects complete preparative HPLC and automated flash systems. A buyer comparing two listings of the same model can weigh condition, configuration, and included accessories across more than one source.
Where a unit needs replacement parts, these can be sourced via Questpair. Documentation and manuals can be requested through Questpair, with specialists responding within the hour. Warranty is often possible and is arranged in consultation for the individual listing, so the terms attach to the specific instrument rather than to the brand as a whole. Because every listing here is a used unit, the comparison a buyer makes is between configurations and conditions rather than between new and used, and the individual listing page carries the detail each decision turns on.
Questpair review of Teledyne Isco
Our take based on listings data and supplier feedback
Teledyne ISCO occupies an unusual position among instrument makers, bridging the analytical laboratory and the environmental field with a catalogue that runs from benchtop purification systems to open-channel flow meters sited in sewers and streams. For a buyer scanning the Questpair listings, three characteristics shape what is worth knowing.
The first is the depth of the chromatography and purification range. The CombiFlash and RediSep names are well established in automated flash chromatography, the technique that separates reaction mixtures into their components on disposable silica cartridges, and the ACCQPrep line extends the same approach into preparative HPLC for larger-scale isolation. Foxy fraction collectors round out the workflow by capturing eluted peaks into individual tubes. A laboratory moving from manual column work to automated purification tends to buy these as a set rather than in isolation, so a used CombiFlash paired with a RediSep cartridge format and a Foxy collector reconstructs a complete purification bench at a fraction of new cost. The Questpair catalogue reflects that pattern, with purification instruments forming a visible share of what is offered.
The second characteristic is the syringe pump engineering. The D-Series syringe pumps and the ReaXus reactant feed pumps deliver continuous, pulseless flow at pressures that reciprocating pumps struggle to hold steady. That matters in supercritical fluid work, in high-pressure reaction feeding, and in any application where a pressure ripple would disturb a measurement or a reaction. These pumps have a long service life, which is part of why used units reach the secondary market in working condition and why a buyer can reasonably consider one. Where warranty is a concern, it is arranged in consultation for the specific listing rather than offered uniformly, so the individual listing is the place to check.
The third characteristic is the environmental monitoring heritage, which sets Teledyne ISCO apart from makers that stay inside the laboratory. The water and wastewater samplers and open-channel flow meters are field instruments, built for autonomous operation in treatment plants and watercourses. They appear less often on a laboratory procurement list but are central for environmental consultancies and municipal utilities, and their presence in the catalogue signals that this brand serves a wider audience than a chromatography specialist alone.
Across the catalogue, every one of the current listings is a used instrument, which concentrates the decision on condition and configuration rather than on the new-versus-used trade-off. Prices range widely, from EUR 65 at the accessory and consumable end to EUR 26.754 for complete high-end systems, with an average around EUR 10.273. That spread reflects the range of the product families themselves, from a bare fraction collector to a fully configured preparative HPLC. The listings come from 6 verified suppliers and distributors across 4 countries, giving a buyer more than one source to compare on a given model. Parts, where a unit needs them, can be sourced via Questpair, and documentation requests reach specialists who respond within the hour.

**Chromatography and purification depth**
The CombiFlash and RediSep flash chromatography lines appear across the Questpair listings, covering automated purification workflows that laboratories run daily.
**Syringe pump range for high-pressure work**
D-Series syringe pumps and ReaXus reactant feed pumps give precise, pulseless flow for supercritical fluid and reaction-feed applications where pressure stability matters.
**Used instruments at accessible prices**
All 74 current listings are used units, priced from EUR 65 to EUR 26.754 across 6 verified suppliers and distributors.
Frequently asked questions
Where can I find manuals and documentation for Teledyne ISCO instruments?
Documentation requests go through Questpair, where specialists respond within an hour. Since configurations vary between listings, it helps to reference the specific model or listing you are asking about.
How much does Teledyne ISCO equipment cost?
Listings on Questpair range from EUR 65 to EUR 26.754, with an average of EUR 10.273. The lower figures cover accessories, consumables, and individual components, while the higher figures reflect complete configured systems such as a CombiFlash flash chromatography setup or an ACCQPrep preparative HPLC system.
What's the difference between refurbished and used Teledyne ISCO units?
Both are priced below new units on Questpair. The practical difference is in the condition described in each listing, so read the individual listing for details on configuration, wear, and included consumables.
Is there a warranty on Teledyne ISCO equipment?
A warranty is often possible and is arranged in consultation for the specific listing. Terms are not set centrally, so they depend on the individual unit and supplier.
Is Teledyne ISCO equipment suitable for clinical or research work?
The laboratory side of the range supports molecular biology, medicinal chemistry, and bioprocessing, with flash chromatography and preparative HPLC used for compound purification and syringe pumps used for protein purification feed lines and high-pressure delivery. Whether a specific listing fits a given clinical or research protocol depends on its configuration, which each listing describes.
How long do Teledyne ISCO instruments last?
These are modular laboratory and environmental instruments built for extended use, and the presence of used and discontinued configurations on the market reflects long service lives. Actual lifespan depends on maintenance history and the condition noted in each listing.
Can I get parts for Teledyne ISCO systems?
Parts can be sourced via Questpair. Because systems like CombiFlash are modular, it helps to specify the detector, column format, or pump head you need when enquiring.
What are the alternatives to Teledyne ISCO equipment?
The alternative depends on the category. For flash chromatography and preparative HPLC the comparison is with other purification platforms, for syringe and reciprocating pumps it is with other fluid-delivery pumps, and for water and wastewater samplers and open-channel flow meters it is with other environmental monitoring hardware. The Questpair catalogue lets you compare listings by type and condition rather than by brand alone.
What is the lead time for Teledyne ISCO equipment?
Lead time depends on the individual supplier and whether the unit is in stock as a standalone item or part of a larger assembly. Questpair specialists can confirm availability for a specific listing within an hour of contact.
What is the difference between parts and spares for these instruments?
In practice the terms are used interchangeably for the replacement components of a system, such as a pump head, detector module, or RediSep column or cartridge. All of these can be sourced via Questpair.
Do suppliers ship Teledyne ISCO equipment internationally?
The equipment is listed by verified suppliers and distributors across 4 countries, so cross-border shipping is common. Shipping arrangements are confirmed per listing with the supplier involved.
What product lines does Teledyne ISCO make and how do they differ?
The chromatography lines are CombiFlash for flash purification, RediSep columns and cartridges as its consumable format, and ACCQPrep for preparative HPLC. The pump lines are the D-Series syringe pumps for pulse-free high-pressure and supercritical fluid work and the ReaXus reciprocating pumps for reactant feed, while Foxy handles fraction collection and the environmental side covers open-channel flow meters and water and wastewater samplers.
Which Teledyne ISCO instrument types are actually listed on Questpair and in what condition?
The types appearing most often are flash chromatography systems, preparative flash chromatography systems, UV-Vis detectors, automated fraction collectors, fraction collectors, and preparative HPLC systems. Across the whole brand catalogue, 100 percent of the 74 listings are used, with the remainder being new or refurbished units.
What separates the cheapest Teledyne ISCO listings from the most expensive?
The lower prices are accessories, consumables, and individual components such as columns or a standalone pump head. The higher prices are complete configured systems with detectors, column formats, and collection hardware assembled together, which is why the average listing at EUR 10.273 sits toward whole instruments rather than small parts.
About Questpair
Questpair is the European marketplace for lab equipment, where AI-prepared cases and personal specialists guide every purchase. We work with 247 verified suppliers across 38 countries to find buyers the right used, refurbished or new instruments, with response within 1 hour and significant savings vs buying new.
Personal · Fast · Reliable · Affordable






















