Laboratory equipment

High quality flow timer; Suited for various industrial cup sizes and brands (ASTM-, DIN, ISO, AFNOR  (more)& FORD cups) Optical / contact-less fluid detector; Fast response time, accurate, reproducible; Automatic start & stop with drip detection; Dynamic light compensation; 0-199.9s @0.1s resolution; 200-999s @1s resolution; Flow time comparison with previous measurement (press button again when activated); Automatic shut down after 5 minutes of inactivity; Available in multiple colours.

Save precious time and gain efficiency in the lab with the OLA2500 Lab Automation System (LAS), the  (more)high-throughput aliquotting solution with pre- and post-analytical sample-processing capabilities. The Olympus OLA2500 LAS is an advanced modular automation system designed for medium- to high-volume laboratories. As a front-end sample-processor the OLA2500 LAS automates sample aliquotting – saving time, labor, and eliminating sample handling errors. The system also selectively decaps and sorts tubes to any analyzer sample rack. The Olympus OLA2500 LAS is a Olympus Lab Automation solution to increase productivity and efficiency in medium- to high-volume laboratories. It automates labor-intensive tasks such as sample identification, decapping, aliquotting, out sorting, and archive preparation of sample tubes. Typical aliquotting throughput of up to 650 total tubes per hour and sorting throughput of up to 800 tubes per hour to reduce your sample preparation for better test turn-around time Minimize your staff’s biohazard exposure, reduce errors, and reduce repetitive motion injuries associated with manual sample-processing User-defined applications for aliquotting priority, sorting, decapping, and archiving. Identifies sample tube size, cap type and color, and sample volume using an on board digital image analysis system Processes most primary tubes (including conventional, BD Hemoguard or screw top closures in parallel, foil top closures with optional decapping unit) Builds personality racks for Olympus, Hitachi, Beckman-Coulter and others Automatically generate secondary tubes with user defined barcode labels No carryover with disposable, conductive aliquot tips Clot detection to ensure valid sample distribution Prioritized aliquotting when there is insufficient amount of sample in the primary tube Load up to as many as 300 samples in the input area Sort to any number of user defined sorting targets with up to 1,080 tube capacity at the destination area Holds bulk on-board consumable inventory Sort and speed primary and/or secondary samples to workstations in specific analyzer racks Access samples without interrupting the instrument with electronically controlled drawer bays Sorts primary and secondary sample tubes at high speeds to meet peak load demands Archive samples in parallel with sorting or separately in batch User defined sorting areas that accommodates any analyzer sample rack Reduces the number of “problem tubes” at the analytical workstations by sorting out the tubes with bar code label, test order and decapping problems Decap screw cap and conventional rubber closures in parallel with a standard decapper; an optional decapper handles foil top closures

Max RPM 5300 Max. RCF: 2,600 x g Volume 12 x 15 ML Programs: Last entered values are saved Timer swi (more)tch1 – 99 min and continuous use Weight (kg) 10.7 B × D × H: 284 × 375 × 240mm Features and benefits: Bright digital displays and touch-pad keys provide quick and easy speed and run-time adjustment. START key repetitions runs. User-friendly self-diagnosis gives errors on the display. Brushless motor is virtually maintenance-free and ensures clean working conditions. Safety: Includes lid lock, lid interlock and steel armored ring Meets international safety standards Accessories: Centrifuge comes standard with an autoclave Heraeus 3760 rotor made of impact-resistant glass fiber reinforced polyamide, which offers high stability and excellent run characteristics

The Precision Xceed Pro Point of Care system for blood glucose and blood β-ketone control is intende (more)d for in vitro diagnostic quantitative determination of glucose (D-glucose) in fresh capillary, venous, arterial and neonatal whole blood samples and of β-ketones (beta-hydroxybutyrate) ) in fresh capillary and venous whole blood samples. The system is not for use in diagnosing diabetes mellitus, but is intended to help monitor the effectiveness of diabetes regulation. The Precision Xceed Pro system simplifies point-of-care testing for healthcare professionals using functions that increase the reliability of the testing process and ensure that testing policy is adhered to as well as possible. Patient test results: 2500 Control test results: 1000 Operator IDs: 6000 Test strips: 36 (18 glucose, 18 ketones) Skill test results: 20 Glucoselinearity test results: 20 results (1 panel, 5 levels, 4 repetitions per level) Ketone linearity test results: 20 results (1 panel, 5 levels, 4 repetitions per level) Patient IDs: 6000 patient records (name, gender, date of birth) Dimensions (H x W x D): 197 x 75 x 53 mm Weight: 256 grams

Applied Biosystems has developed millions of human, mouse, and rat probe/primer sets. These assays m (more)ay be performed individually or in focused sets on the TaqMan® Low Density Arrays (TLDAs), microfluidic cards that contain up to 384 dried-down TaqMan® Gene Expression Assays and eight ports for fast, efficient loading. Key Features : Simple to use Reliable gene quantition Fast, beautiful results Contact us to get a quote!!

The CryoHolder is a unique tool on the market that helps you move frozen cryovials faster, safer and (more) easier. It's very intuitive, enabling you to precisely move the desired vial without the risk of frostbite or the risk of dropping the vial.

Velp refrigerator-thermostat of 169L net that guarantees excellent connectivity and high performance (more) in temperature control. Auto-Tuning thermoregulation system and transparent internal door that allows visual inspection of the contents with LED shelves for crops and fermentation studies and small growth chamber. - Adjustable temperature: from 3°C to 50°C; stability +/- 0.5°C - 169 liter capacity - Equipped with premium Wi-Fi connectivity to VELP Ermes Cloud Platform - Wireless management via TEMPSoft ™ software (optional) - Accepts up to 4 VELP breathing systems Follow the link for more information: https://jointlab.com/gb/refrigerated-thermostat-and-incubator/324-illuminated-incubator-foc-200il-velp.html

System consists of: 1x Sartorius Stedim BioPAT DCU Control Tower 4x Sartorius Stedim Biostat B-DCU B (more)ioreactor Unit 4x Sartorius Stedim Univessel SU Reactor Holder 8x Sartorius PMA7501 Scale 4x Sartorius BB Reactor Heating Blanket 4x Sartorius Filter Heater The Biostat B-DCU is a fermenter/bioreactor specifically designed to accommodate the requirements of process optimization and characterization in the biotech and biopharmaceutical industry. It provides enhanced functionality and an unrivalled level of options for cell culture and microbial processes making it the ideal scale-down model for your large scale process. Supply Tower Gases – Gas supply pressure 1.5 bar (Gasses must be dry, oil and dust-free), connection of gas hoses with d external 6 mm Water – Water supply pressure: 2 – 4 bar, Flow rate up to 20 l/min, Temperature minimum 4°C, Degree of hardness: 12° dH max. Integrated water pressure reduction down to: 1.5 bar Interfaces – 3+ external signal inputs 0–10 V 3+ external signal inputs 4–20 mA Fieldbus for serial or ethernet devices Digital output 24 V for on/off control of external devices Up to 4 analoge outputs for external pumps Connection for control of external drive motor (0–10 V) Dimensions (WxHxD): 360 x 768 x 432 mm Weight: 45 kg Motor drive Rotation speed: 20 – 400 rpm Process Control Temperature: Pt100 0 – 150°C (temperature control 0 – 80°C) Dissolved oxygen: single-use DO sensor patch 0–100% pH: single-use pH sensor patch 6.5 – 8.5 pH Redox: Combined measurement with pH sensor –1,000 –1,000 mV Balance substrate: 7 kg / 1 g Gravimetric flow controller: Accuracy for 7 kg balance 5 g/h O2 offgas: Zirconium dioxide 0–50 vol% CO2 offgas: Infrared 0–10 vol% Temperature control module for UniVessel SU Single-use Culture Vessel With Heating Blanket Electrical heating blanket Temperature control up to 50°C Heating capacity 2 L : 200 W

Capacity: 410 g Readability: 1 mg Repeatability: 0.9 mg Linearity: ±2 mg Calibration type: Internal  (more)Dimensions (WxDxH): 194 x 366 x 276 mm Usable heigh of draft shield: 175 mm Weighing platform: 127 x 127 mm Weight: 7.6 kg

The RAPIDLab 348EX Blood Gas System is the cost-effective solution for smaller laboratories tasked w (more)ith the challenge of performing fast-turnaround critical care tests. Fully-automated operation supports low-to-medium throughput on an easy-to-use analyzer that’s ready to generate accurate, on-demand results when clinicians need them, with a minimum of operator involvement. Measurable Parameters Blood Gas: pH, pCO2, pO2 Measurable Parameters Electrolytes: Na+, K+, Ca++ or Cl– Measurable Parameters Hematocrit: HCT Calculated Parameters: O2SAT, O2CT, HCO3-act, HCO3-std, ctCO2, BEb, BEecf, pO2(A-a), pO2 (a/A), pO2/FiO2, Ca++(7.4), Anion Gap Sample Size: Syringe; 95 µL, Capillary; 95 µL, Microsample mode; 50 µL Sample Type: Whole blood, Dialysate fluid Analysis time: Approximately 60 seconds to result Calibration: Automatic or on demand Input Temperature: 10.0°C–43.9°C Input Hemoglobin: 2.0–25.0 g/dL Input FIO2: 15.0%–100.0% Input Patient/Operator IDs: Up to 16 characters (alphanumeric) Input Sample location: Radial, brachial, femoral, cord, arterial line (with RAPIDComm Data Management System (not inlcuded)) Dimensions (WxDxH): 385 x 353 x 382 mm Weight: 9.4 kg

Sample capacity: one 384 well PCR plate Temperature control range of the block: 4°C to 99°C Gradient (more) range: 1°C to 20°C Temperature range of the gradient: 30°C to 99°C Temperature control range of the lid: 37°C to 110°C Block hmogeneity (at 35°C): ≤± 0.3°C Block hmogeneity (at 90°C): ≤± 0.4°C Control accuracy: ± 0.2°C Heating rate: 4°C/s Cooling rate: 3°C/s Dimensions (WxDxH): 260 x 415 x 370 mm Weight: 18.5 kg

includes one laser: 785 nm, power range on a sample 5-50 mW

includes one laser with optical isolator: 785 nm, power range on a sample 0.5-5 mW

includes one laser: 785 nm, power range on a sample 15-150 mW

includes two lasers: 785 nm, power range on a sample 15-150 mW; 660 nm, power range on a sample 1-32 (more) mW

The dynamic contact angle measuring devices and tensiometer of the DCAT series are universal measuri (more)ng devices for the force-based measurement of interfacial parameters and phenomena.

ideal for in-vivo skin measurements, direct contact measurements of powders and liquids, f=6.21 mm,  (more)NA=0.38, laser spot size 2.5 µm

Axial Focusing Accessories

Objective Covers Set Accessories

Adapter for Microscopy SM1

The Sysmex XS-1000i is a compact, fully automated haematology analyser, designed to generate complet (more)e blood counts with five-part leucocyte differential. YOM : 2014 Excellent condition. Comes with sampler, PC and monitor.

+ Fluorescence flow cytometry for high quality analysis + Excellent WBC differential + Very low aspi (more)ration volume + Compact + Ready-to-use system with minimum maintenance NEW UNIT !

This is a portable pumping system to be used directly with cell culture inside microfluidic chips or (more) organ-on-a-chip devices. After filling the 4x fresh reservoirs of 15 ml tubes are pumped inside microfluidics. 4x piezo micropumps are used and its flow rate and flow on/off time are arranged by cell phone application via Bluetooth. The kit contains piezo pumps and controllers, metal base, 15 ml tube covers, tubings, android application, and power cable and adaptor.

This is a kit of microencapsulation generators to be used directly droplet and microparticle formati (more)on by water and oil phases. The kit contains a syringe pump, droplet generation microfluidic chips, fitting/holders, tubing, and collector.

This is a kit of tissue chip (or organ-on-a-chip) studies to be used directly for tissue emulating e (more)xperiments. It is a blank platform and needs cells and mediums to be supplied by researchers. The kit contains a peristaltic pump, tissue chips (5 pieces with customer selection option), fitting/holders, and tubings.

includes two lasers: 785 nm, power range on a sample 5-50 mW; 660 nm, power range on a sample 1-32 m (more)W

The Zeta Potential Analyzer ZPA 20 uses the patented bidirectional oscillating streaming potential a (more)nalysis to measure the zeta potential of fibres, powders and plate shaped solid materials.

With the humidity generators and controllers of the HGC series the relative humidity can be controll (more)ed inside of small measuring chambers.

The spinning drop video tensiometers of the SVT series are special-purpose optical instruments for m (more)easuring extremely low interfacial tensions and rheological properties.

With the Langmuir trough module LTMr it is possible to study monolayers at temperatures up to 90 °C.