Thermo Sorvall SLA-600TC Super Lite Fixed Angle Rotor Festwinkelrotor 13.000 rpm

The autoclave is suited as a universal autoclave for demanding sterilization tasks. The autoclave is (more) intended for use in  the medical field, e.g. in general physician and dental practices. The autoclave is not approved for the sterilization of liquids. Programs Universal Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 5:30 min, Operating time: 30 min, Drying: 20 min Quick program B: Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 5:30 min, Operating time: 30 min, Drying: 10 min Quick program S: Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 3:30 min, Operating time: 30 min, Drying: 5 min Gentle program: Sterilization temperature: 121°C, Sterilization pressure: 1.1 bar, Sterilization time: 20:30 min, Operating time: 45 min, Drying: 20 min Prion program: Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 20:30 min, Operating time: 45 min, Drying: 20 min Chamber dimensions (⌀xD): 250 x 350 mm Capacity: 17 L Dimensions (HxWxD): 490 x 425 x 620 mm Weight: 55 kg

This Tuttnauer Autoclave 5050ELV-D Steriliser was removed from a university lab where it was surplus (more) to requirements. The system has been stripped for parts and is sold for spares/repairs.

Integra Biosciences Agarclav AG-L Autoclave This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

DW Scientific AES Chemunex Masterclave 09 Benchtop Autoclave This was removed from a university lab (more) where it was surplus to requirements. The unit powers up but has not been tested further at our facility. It is sin good cosmetic condition with minor marks.

Tuttnauer 2540M Autoclave The Tuttnauer 2540M Autoclave is designed to compliment any healthcare fa (more)cility. The bright new easy-to-use panel was designed with the operator in mind. The 2540M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. Standard unwrapped cycle Hot start: 14 min, Cold Start 30 min. Cycle times are approximate and may vary depending on instrument loads. INCLUDED: The Tuttnauer 2540M Autoclave includes: - 3 Stainless Steel Trays - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Designed to maximize turnaround time, RAPIDLab 1200 Systems have the capacity to enhance blood gas t (more)esting efficiency in the clinical laboratory by combining testing speed and reliability with low maintenance. RAPIDLab 1200 systems are our proven solution for high-volume critical care testing sites. Leverage the benefits of RAPIDLab 1200 Systems: Comprehensive test menu addresses a variety of critical care testing needs Intuitive operation and minimal maintenance help increase productivity without increasing staff. Industry-proven accuracy and reliability through long-life Ready Sensor electrode technology Biosafe automatic sampling system with clot detection and clearance Effortless onboard Automatic Quality Control (AQC) for enhanced quality assurance and regulatory compliance Assays Blood gas: pH, pCO2, pO2 Electrolytes: Na+, K+, Ca++, CI- Metabolites: Glucose, Lactate CO-oximetry: tHb, HHb, O2Hb, sO2, COHb, MetHb, Neonatal Total Bilirubin Dimensions (WxHxD): 584 x 572 x 559 mm Weight: 29.5 kg

LABORATORY OVEN SLW SMART POL-EKO SLW - FORCED AIR CONVECTION The SLW series laboratory ovens are de (more)signed to reach high temperatures, up to 300 °C. Available from 15 to 1000 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use, just like your smartphone. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - 4,3", clear, full colour touch screen - USB and LAN ports for data transfer - multi-segment time and temperature programs - loop function up to 255 times or endless - adjustable start delay feature - adjustable ramps - recording of min, average and max temperature value for each segment - overview of set and current parameters while operating - operating in temperature or time priority mode - fan speed control in the range of 0 … 100% or 10% … 100% (depending on the chamber capacity) - temperature sensor fail alarm - possibility of temperature calibration by the User - power failure control system (program continued after restoring power) - visual and sound alarm - internal memory for programs and data storage - operating with gloves on - event registry - user manual for direct download QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLW SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLW SMART SERIES The 10 models of the SLW series cover most of your needs: from mini oven to the 1000 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for incubator models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

This Agilent E8403A VXI Mainframe with N4872A, N4873A, E4809A, E84918 Modules was removed from a uni (more)versity lab where it was surplus to requirements.  The unit powers up and is in reasonably good cosmetic condition. It is missing one of its feet.

Selecta Agimatic N hot plate stirrer of 10 L capacity. 60-1600 rpm. Temperature range: from 50ºC to  (more)350ºC. 14.5 cm diameter stainless steel plate. Analog speed and heat control from 0 to 100%. Indicators with light. Selecta Agimatic N hot plate stirrer is a compact and efficient device that can be easily placed on a laboratory table. With its 10 liter capacity, it is ideal for heating liquids in a uniform and controlled manner in research and experimental environments. 50Hz 220 V 3A 306 W

XA 52.5Y.F Analytical Balances for Filters XA 5Y.F Analytical Balances are used to determine absorpt (more)ion in the process of differential filter mass measurement with the highest readability [d] of 0.01 mg. For this reason, in addition to the regular weighing pan, XA 5Y.F balances have a weighing pan for filters. The devices are also equipped with a manually opened weighing chamber and use a semi-automatic levelling system. Semi-automatic Leveling System Semi-automatic levelling, the so-called LevelSENSING System, has a great advantage over the manual levelling, in the case of the former one the user is prompted in which direction to level the balance. This shortens the very process. 5Y PLUS Balances (Smart Min Weight, Integrated Ionizer, Two-Point Adjustment and Much More) – You Have It Already. With ELLIPSIS Balances, You Have the Same and More: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Large-size additional display is an accessory of load-cell scales. stainless steel housing 6 digits  (more)of 4,5 inches in height (11,2cm) white diode backlight Features Robust and Resistant Stainless Steel Housing The WWG-2 LCD display is housed in a stainless steel housing, which enables its operation in harsh industry conditions. The display can be installed on the table top or mounted on the wall. The WWG-2 LCD features white diode backlight and clear display indicating digits of 4.5" (11.2cm) height. Communication Communication with indicators (weighing instruments) is carried out via RS22 or RS485 connectors. Depending on the installation option, the display is powered by 230VAC or 7-24VAC.