Autoclaves / sterilizers

Scilogex SuperPette Autoclavable Pipettor, 20-200ulThe new SCILOGEX SuperPette fully autoclavable di (more)gital pipettors have an excellent ergonomic and ultralight design providing effortless, ergonomic, accurate and precise pipetting experience. In addition, the volume lock helps protect from accidental volume change. The clear digital display is centrally located, for the left- and right-handed users. UV and chemical resistant.Product Features - One handed volume adjustment and volume lock - Autoclavable, digital, ergonomic, ultralight, and accurate - UV and chemical resistant - Display is centrally located, for ambidextrous use. - Compatible with universal pipette tips of up to 1000 mL - Built with a calibration tool, so your lab can save time and cost by maintaining the pipettor in-house - Suitable for forward or reverse pipetting Click Here to View Product Video INCLUDED: The Scilogex SuperPette Autoclavable Pipettor, 20-200ul includes: - Two Year Manufacturer's Warranty

Tuttnauer 2340M AutoclaveFeatures - Automatic shut off at the end of both the sterilization and dry (more) cycles. - A long life electro polished Stainless Steel chamber and door. - Double safety locking device prevents door from opening while chamber is pressurized. - Drain valve is located on the front, allowing for quick and easy draining of water reservoir. - Dual safety thermostat to protect against overheating. - International certifications. - 1 year parts and labor warranty. 10 year chamber warranty With the operator in mind, the colorful control panel is both intuitive and easy to use. Control panel includes a pressure gauge, timer, thermostat, and function selector. Tuttnauer manual autoclaves will compliment any healthcare facility and satisfy all of your sterilization needs. With a small foot print of only 545 x 510 x 365mm this autoclave is both efficient and compact. The internal chamber has a volume of 5 gallons (19 liters) and can fit three stainless steel trays. The long-life elecro polished chamber and door are made to last. The Tuttnauer 2340M Autoclave is designed to compliment any healthcare facility. The bright new easy-to-use panel was designed with the operator in mind. The 2340M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. Standard unwrapped cycle Hot start: 13 min., Cold Start 27 min. Cycle times are approximate and may vary depending on instrument loads. INCLUDED: The Tuttnauer 2340M Autoclave includes: - 3 Stainless Steel Trays - Tray Holder - Base Plate - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Tuttnauer 2540M Autoclave The Tuttnauer 2540M Autoclave is designed to compliment any healthcare fa (more)cility. The bright new easy-to-use panel was designed with the operator in mind. The 2540M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. Standard unwrapped cycle Hot start: 14 min, Cold Start 30 min. Cycle times are approximate and may vary depending on instrument loads. INCLUDED: The Tuttnauer 2540M Autoclave includes: - 3 Stainless Steel Trays - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Tuttnauer 3870EAP Digital Autoclave, 230V Chamber Volume 85L Sterilization Temperature Range 105°C  (more)to 137°C Chamber Dimensions 15 x 27 in. (38.1 x 68.58 cm) Features - Designed to autoclave wrapped, unwrapped, glass and tools. - Not suitable for liquids - Sterilization time up to 99 minutes - Temperature selection from 105°C to 137°C - Includes trays - EAP Models allow closed door drying - In-line particle filter to protect valves - Electronic pressure and temperature sensors - Low Water Alarm - sounds when reservoir needs to be refilled - Standby Heating - keeps chamber warm for quicker cycles - Built-In Printer - Provides a printed summary at the end of each cycle, documenting temperature, elapsed sterilization and drying time, selected cycle number, real time and date, as well as any errors or interruptions that may occur during the cycle - Chamber Volume – 85L - Power – 230V, 1 Phase (60Hz) NEMA 6-15 The Tuttnauer 3870EAP Digital Autoclave, 230V is designed with superior productivity in mind, offering monitoring, recovery, standard printing and a wide range of programmable and customizable options for large capacity operation. An easy-to-use, single touch control system increases productivity and rapid cycles optimize availability of ready-to-use sterile instruments. A closed door active drying system is featured to maintain sterility and ensure efficient drying of packs and pouches. The long-life electro polished chamber and door are also made to last. Click Here to View Product Video INCLUDED: The Tuttnauer 3870EAP Digital Autoclave, 230V includes: - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

This listing is for a refurbished Laboklav 55M Autoclave Incl. commissioning in UK. (outside the UK (more) is possible also, please request and we will try and accomodate) Vertical device, 55l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 740 x 765 x 600 chamber dimensions (Ø x d in mm) 410 x 460 Steam generator 3,3kW Fast re-cooling with double jacket 1N 230V, 50Hz, 16A Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status.  Test runs to ensure and check functionality

MARSHALL Select MS-PA1000UL Autoclavable Pipette, 100-1,000ul Volume Range 100 to 1,000ul Adjustabl (more)e or Fixed Volume Adjustable Pipette Type Manual Air Displacement Features - Ergonomic design with a light touch plunger and relaxed finger rest reduces user fatigue - Fully autoclavable, allowing for easy sterilization - Constructed from high-quality, heat-resistant materials for durability - UV and chemical resistant to withstand harsh laboratory conditions - Centrally located digital display facilitates ambidextrous use - Quick-release pipette tip ejector simplifies tip changes - Volume lock prevents accidental volume adjustments - Compatible with universal pipette tips for versatility - Suitable for both forward and reverse pipetting techniques - Ideal for handling both low and high-viscosity liquids, enhancing versatility in laboratory procedures The MARSHALL Select MS-PA1000UL Autoclavable Pipette is a high-performance, manual air displacement pipette designed for precision and comfort in laboratory applications. This pipette offers an adjustable volume range from 100 to 1,000ul with precise 5ul increments, ensuring accurate measurements. It features an ergonomic design with a light touch plunger and relaxed finger rest, which minimizes user fatigue and enhances comfort during extended use. Constructed from high-quality, heat-resistant materials, the MS-PA1000UL is fully autoclavable, providing excellent protection against UV light and chemicals, ensuring durability and reliability in harsh laboratory environments. The design includes a centrally located digital display for easy viewing by both left- and right-handed users, enhancing its ambidextrous usability. Additional features include a rotating counter knob for quick volume setting, a quick-release pipette tip ejector for convenient tip changes, and a volume lock to prevent accidental adjustments. This pipette is compatible with universal pipette tips and is suitable for both forward and reverse pipetting techniques, making it versatile for handling low-viscosity liquids as well as more challenging higher-viscosity or foamy samples. The MS-PA1000UL is the ideal choice for laboratories seeking a reliable, easy-to-use pipette that meets rigorous standards, including ISO 9001:2008 and ISO 13485:2003 certifications, along with CE marking. INCLUDED: The MARSHALL Select MS-PA1000UL Autoclavable Pipette, 100-1,000ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

MARSHALL Select MS-PA20UL Autoclavable Pipette, 2-20ul Volume Range 2 to 20ul Increment 0.5ul Pipett (more)e Type Manual Air Displacement Features - Adjustable from 2 to 20 µl for versatile small to medium sample processing - Offers 0.5 µl increments for precise volume adjustments in detailed experiments - Ensures accurate measurements with an accuracy of ±0.9/1.20/3.00% for critical applications - Provides consistent results with a precision of ±0.4/1.00/2.00% to enhance experiment reproducibility - Serializable at 121°C without special preparation, maintaining sterility and performance - Low-force design reduces fatigue and minimizes risk of repetitive strain injuries - Easy to maintain for long-term reliable performance in the lab The MARSHALL Select MS-PA20UL Autoclavable Pipette is a highly precise and ergonomic tool designed for various laboratory applications requiring accurate liquid handling. With a volume range of 2 to 20 µl and a fine 0.5 µl increment, this pipette offers exceptional accuracy of ±0.9/1.20/3.00% and precision of ±0.4/1.00/2.00%, making it ideal for delicate and small-volume tasks. Its lightweight design and low-force mechanism reduce the risk of repetitive strain injuries, ensuring user comfort during prolonged use. The centrally located digital display enhances ambidextrous usability, making it easy for both left- and right-handed users to view volume settings. A rotating counter knob allows for quick volume adjustments, while a quick-release pipette tip ejector facilitates convenient tip changes. Constructed from innovative materials, the MS-PA20UL is easy to calibrate and maintain, ensuring reliable performance over time. This pipette is fully autoclavable at 121°C, allowing for thorough sterilization without the need for special preparation. After autoclaving, it can be cooled and dried over 12 hours, ready for immediate use. The design helps avoid repetitive strain injuries and includes a volume lock to prevent accidental adjustments. It is compatible with universal pipette tips and suitable for both forward and reverse pipetting techniques, offering versatility for handling low-viscosity liquids and more challenging higher-viscosity or foamy samples. As part of a comprehensive range covering volumes from 0.1 µl to 10 ml, the MS-PA20UL provides flexibility across different applications. With robust construction and user-friendly features, this pipette is an indispensable tool for laboratories seeking precision and reliability in liquid handling, meeting rigorous standards including ISO 9001:2008 and ISO 13485:2003 certifications, along with CE marking. INCLUDED: The MARSHALL Select MS-PA20UL Autoclavable Pipette, 2-20ul includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

LTE Touch-Clave K150e Autoclave Lab This system comes from an operational lab, where it is now surpl (more)us to requirements. The client has confirmed it was in full working order when last used. Includes full service history with the most recent visit in 2022. Further information regarding the item is available on request. This system is available for collection from Falkirk, Scotland. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

DW Scientific AES Chemunex Masterclave 09 Benchtop Autoclave This was removed from a university lab (more) where it was surplus to requirements. The unit powers up but has not been tested further at our facility. It is sin good cosmetic condition with minor marks.

This Astell Scientific Top Loading Autoclave AACO52 was removed from a university lab where it was s (more)urplus to requirements. The unit has been professionally serviced and has been confirmed to be in full working order. It has passed all safety checks. Full report available on request. It is in good cosmetic condition with minor marks from use.

Tuttnauer Benchtop Autoclave Steam Sterilizer 3850EL-D This was removed from a university lab where  (more)it was surplus to requirements. This Autoclave was inspected by an engineer (St Andrews) The engineer confirmed that the unit was working but required calibration during set-up. The unit has been professionally serviced and re-certified. It is in full working order and has passed all safety checks. It is in excellent cosmetic condition with only minor marks from use.

Priorclave Autoclave Type - PS/MUA/C60 Lab This item was removed from a university where it was surp (more)lus to requirement. It is in good cosmetic condition and powers on, however it is not in working condition and is listed as Spares/Repair. It has a board/display fault.

This Tuttnauer Autoclave 5050ELV-D Steriliser was removed from a university lab where it was surplus (more) to requirements. The system has been stripped for parts and is sold for spares/repairs.

This Priorclave PS/QCS/EH150 Laboratory Autoclave was removed from a university lab where it was sur (more)plus to requirements. The unit has been stripped for parts. Useful parts remaining are 2 x output boards, power supply and heaters. It is sold for spares/repairs.

Hirayama ATA-HVTRD Digital Printer for HV & HVII Series AutoclavesThe Hirayama ATA-HVTRD Digital (more) Printer is specifically designed for use with the Hirayama HV and HVII Series Autoclaves. This printer provides convenient and reliable documentation of sterilization cycles, ensuring accurate record-keeping for compliance and quality control in laboratory and clinical settings.INCLUDED: The Hirayama ATA-HVTRD Digital Printer for HV & HVII Series Autoclaves includes: - Manufacturer's Documentaiton - 3 Month Manufacturer's Warranty

Boxer 300/150LR Autoclave This item was removed from a university lab where it was surplus to requir (more)ements.The unit has one missing wheel and another damaged, so it is currently placed on a pallet with blocks. It also requires a plug to be fitted. Working Condition: The previous client has stated that it was in working order prior to removal. We have not tested it at our facility due to the absence of the plug. Specifications: - Model: 300/150LR - Serial No.: M2436/87772 - Chamber Dimensions: Approximately 540mm diameter x 610mm long - Capacity: Approximately 150 liters - Internal Pressure: 38.7 psi @ 140°C - Power Supply: 415V, 3 phase, 50Hz

This item has just arrived in our stock. Please enquire for further details.

Benchmark BioClave 18 Research Autoclave, 18 liter 115V Despite the space-saving exterior dimensions (more) of the Bioclaves, the stainless steel chambers are surprisingly large, accommodating a variety of liquids, media, instruments, glassware, plasticware, and other common research laboratory items. Available in 8L, 18L, and 28L chamber volumes, these benchtop models include a mechanical and electrical safety interlock that prevents the door from being opened until the pressure has reached zero PSI.With a large digital LCD display and fully automatic operation, all segments of the cycle (fill, sterilize, exhaust, and dry) commence and run to completion by simply pressing the start button. An optional thermal mini-printer is also available for providing a record of sterilization parameters and a USB drive can be used to record settings and transfer them to a PC.The 8-liter BioClave Mini is preprogrammed to meet basic sterilization needs. Temperature can be selected at either 121°C or 134°C, and the sterilization time is fully adjustable. The economical BioClave Mini is the ideal choice wherever benchtop sterilization is required and space is limited. BioClave 18L and 28L Models offer preset cycle options (standard programs), for use with liquids, wrapped research instruments, or unwrapped instruments/plasticware. An additional option “Dry Only” is also available for additional drying time to be added to the end of a cycle. For special applications, requiring variations in cycle parameters, all settings are fully adjustable.The Bioclave 28L features an increased chamber size with a diameter of 32cm. With this larger internal chamber, the BioClave 28 is our only model capable of sterilizing 1 and 2 liters flasks (and bottles). Despite the increased chamber size, the unit is still relatively compact, suitable for benchtop use.INCLUDED: The Benchmark BioClave 18 Research Autoclave, 18 liter, 115V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark BioClave 28 Research Autoclave, 28 liter, 120V Despite the space-saving exterior dimensio (more)ns of the Bioclaves, the stainless steel chambers are surprisingly large, accommodating a variety of liquids, media, instruments, glassware, plasticware and other common research laboratory items. Available in 8L, 18L and 28L chamber volumes, these benchtop models include a mechanical and electrical safety interlock that prevents the door from being opened until the pressure has reached zero PSI.With a large digital LCD display and fully automatic operation, all segments of the cycle (fill, sterilize, exhaust and dry) commence and run to completion by simply pressing the start button. An optional thermal mini-printer is also available for providing a record of sterilization parameters and a USB drive can be used to record settings and transfer them to a PC.The 8 liter BioClave Mini is preprogrammed to meet basic sterilization needs. Temperature can be selected at either 121°C or 134°C, and the sterilization time is fully adjustable. The economical BioClave Mini is the ideal choice wherever benchtop sterilization is required and space is limited. BioClave 18L and 28L Models offer preset cycle options (standard programs), for use with liquids, wrapped research instruments or unwrapped instruments/plasticware. An additional option “Dry Only” is also available for additional drying time to be added to the end of a cycle. For special applications, requiring variations in cycle parameters, all settings are fully adjustable. The Bioclave 28L features an increased chamber size with a diameter of 32cm. With this larger internal chamber, the BioClave 28 is our only model capable of sterilizing 1 and 2 liters flasks (and bottles). Despite the increased chamber size, the unit is still relatively compact, suitable for benchtop use.INCLUDED: The Benchmark BioClave 28 Research Autoclave, 28 liter, 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HVA-85 Economical Floor-Standing Autoclave with Cooling Fan, 85L, 208/220/240V Cham (more)ber Volume 85L Sterilization Temperature Range 105C to 135C Chamber Dimensions 16.5" x 24.2" (42.0 cm x 61.5 cm) Features - Space-saving design with lid opening upward. - Standard built-in cooling fan for faster post- sterilization cooling. - Dual lid safety interlock prevents lid opening when a cycle is in progress, the chamber is pressurized, or the temperature exceeds 97°C. - Agar sterilization mode sterilizes agar, and then automatically keeps it warm to prevent it from solidifying. - One-touch lever to easily open and close chamber lid. - Agar melting mode for rapidly melting agar and then automatically maintaining it at liquid temperature, or for a hot and faster start-up. - Door-closure sensor prevents a cycle from starting unless the door is closed properly. - In-process display shows the status and the progress of sterilization cycle. The HVA-85 and HVA-110 models incorporate a 85-liter and a 110-liter chamber, respectively. They are self-contained, portable floor models mounted on caster wheels. Equipped with a chamber 16.5” in diameter, they can accommodate significantly larger loads than 50-liter models. They are ideal for the sterilization of fermenters, media, wastes, and laboratory glassware.INCLUDED: The Hirayama HICLAVE HVA-85 Economical Floor-Standing Autoclave with Cooling Fan, 85L, 208/220/240V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Scilogex MicroPette Plus 8-Channel Autoclavable Pipettor, 5-50μlThe MicroPette Plus pipettes are ful (more)ly autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Plus 8-Channel Autoclavable Pipettor, 5-50μl includes: - Two Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 0.5-10ul Volume Range 0.5-10uL Adjustable or Fixed V (more)olume Adjustable Volume Accuracy (±%) 1.00/1.50/2.50 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 0.5-10ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul Volume Range 20-200ul Adjustable or Fixed V (more)olume Adjustable Volume Accuracy (±%) 0.60/0.80/1.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 20-200ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty