Tuttnauer 2540M Autoclave

This listing is for a refurbished Laboklav 135MSLV Touch Autoclave Incl. commissioning in UK. (outs (more)ide the UK is possible also, please request and we will try and accomodate) Vertical device, 135l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 840 x 965 x 700 Chamber dimensions (Ø x d in mm) 500 x 660 Steam generator 10kW Vacuum incl. pre- and postvacuum, heating during post vacuum Fast re-cooling with double jacket, counter pressure + internal fan Network connection (LAN), USB 3N 400V, 50 HZ, 16A, CEE plug Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status.  Test runs to ensure and check functionality

This Tuttnauer Autoclave 5050ELV-D Steriliser was removed from a university lab where it was surplus (more) to requirements. The system has been stripped for parts and is sold for spares/repairs.

This item has just arrived in our stock. Please enquire for further details.

Hirayama HICLAVE HG-80 Floor-Standing Autoclave with Automatic Lid, 85L, 208/220/240V Chamber Volume (more) 76L Sterilization Temperature Range 105ºC to 135ºC Chamber Dimensions 14.3 x 28.7 in(36.4 x 73.0 cm) Features - Automatic Lid Opening and Closing Button replaces a foot pedal. - Safety Interlock senses pressure and temperature and prevents lid from opening during a cycle, when the chamber is pressurized, and when the high temperature can cause boil over. - Programmable Auto-Start for running a cycle from 1 to 99 hours later and time for air removal before sterilization. - Large (15 liters) / Efficient Steam Condenser ensures no steam exhausts into the lab. The HG-113 and HG-133 incorporate a radiator for this. - Over-Flow Lamp indicates that the drain bottle is full and ready to be emptied. - Built-in Cooling Fan for faster post-sterilization cooling and shorter completion time. - Selectable Rate of steam venting after sterilization. - Twelve Programs Cycles can be stored. - Large Control and Display Panel improves functionality and shows the progress of the sterilization cycle. The Hirayama HICLAVE HG-80 is an advanced 85L floor-standing autoclave designed for efficient and safe sterilization. It features an automatic lid opening button to replace the conventional foot pedal and an automatic lid closing button for convenience. Its safety interlock prevents the lid from opening during cycles, ensuring safety when the chamber is pressurized or at high temperatures. The programmable auto-start can delay the start of a cycle by 1 to 99 hours. A large and efficient 15-liter steam condenser prevents steam from exhausting into the lab, complemented by a built-in cooling fan for rapid post-sterilization cooling. Users can select the rate of steam venting post-sterilization and program the air removal time before sterilization begins. Up to twelve program cycles can be stored for easy recall.The HG-80 boasts a large control and display panel, enhancing functionality and cycle progress visibility. Specifications include a chamber size of 76 liters (14.3" x 28.7"), a temperature range of 105°C to 135°C, a sterilization timer from 1 to 300 minutes, and an agar warming range maintainable from 45°C to 60°C for up to 24 hours to prevent coagulation. Additional features include a programmable air removal timer, selectable steam venting rates, and customizable temperature settings for lid interlock release for increased safety and flexibility. The unit is equipped with comprehensive safety features, including a circuit breaker with GFCI, low-water power cut-off, over-temp power cut-off, over-pressure power cut-off, safety valve, and a sensor for improper lid closing. The autoclave comes with a 15-liter water tank for the steam condenser and a 2-liter drain water bottle. It operates on 208/220/240V, 50/60 Hz, single-phase power, with a consumption of 3.8 kW, and ships at a weight of 255 lb (116 kg).INCLUDED: The Hirayama HICLAVE HG-80 Floor-Standing Autoclave with Automatic Lid, 85L, 208/220/240V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Scilogex SuperPette Autoclavable Pipettor, 100-1000ulThe new SCILOGEX SuperPette fully autoclavable  (more)digital pipettors have an excellent ergonomic and ultralight design providing effortless, ergonomic, accurate and precise pipetting experience. In addition, the volume lock helps protect from accidental volume change. The clear digital display is centrally located, for the left- and right-handed users. UV and chemical resistant.Product Features - One handed volume adjustment and volume lock - Autoclavable, digital, ergonomic, ultralight, and accurate - UV and chemical resistant - Display is centrally located, for ambidextrous use. - Compatible with universal pipette tips of up to 1000 mL - Built with a calibration tool, so your lab can save time and cost by maintaining the pipettor in-house - Suitable for forward or reverse pipetting Click Here to View Product Video INCLUDED: The Scilogex SuperPette Autoclavable Pipettor, 100-1000ul includes: - Two Year Manufacturer's Warranty

Tuttnauer 5075ELP Lab Line Benchtop AutoclaveFeatures - Designed to autoclave everything in your lab (more), including liquids - Take advantage of Tuttnauer’s state-of-the-art control system with multi-color display - Automatic pressure locking system, door will not open when the chamber is over pressured - Integrated printer documents date, time, temperature and pressure - No water utility connections needed, just plug in and add water - Two integrated temperature probes for complete sterilization of liquids - Four validated cycles (glass, plastic, liquid A and liquid B-waste) - Stores up to 200 past cycles you can open on your PC - Create up to 16 custom cycles - Comes with 8 factory set cycle programs that cover the processing needs of most laboratories and research centers - Optional biohazard filter (BH) prevents contaminated air from exhausting into the lab Advanced multi-color control panel features intuitive method readouts in a multitude of languages. 316 Ti grade high quality stainless steel chamber and door with electro-polish finish allows for long product life and ease of periodic cleaning Designed to save space on your laboratory workbench, the 5075ELP is a front-loading benchtop autoclave that provides high quality, repeatable performance and accountability for a wide range of applications used in modern laboratories. The 5075ELP has an advanced multi-color control panel and a chamber made of 316 Ti stainless steel. Each model has several optional added-value features which can be configured for fast cooling, efficient drying, biohazard and waste sterilization, F0 control, and more. INCLUDED: The Tuttnauer 5075ELP Lab Line Benchtop Autoclave includes: - 3 Trays - Tray Holder - Base Plate - Autoclave Stand - 2 Buck Boost Transformers - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

New Brunswick Scientific U570-86 Ultra Low Temperature Freezer Lab This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and was tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition with minor marks. 4 Shelves - 56 x 75cm

Are you overwhelmed by the number of production processes? What about having them all under control? (more) To be able to analyse and correct them in real time? After all, it is the key to increasing the efficiency of the production line! Our clients, the factory owners, were the ones who told us about their problems and needs. Our answer is simple: the E2R System. This software is designed to make your work easier. The E2R System consists of six independent modules: 1. E2R Weighing, 2. E2R Weighing Records, 3. E2R Formulations, 4. E2R PGC, 5. E2R Checkweigher, 6. E2R Moisture Analyzer. Choose the best module for your company. Need more information? With the E2R PGC module, you can: safely and continuously record measurements and controls at the weighing workstations; buffer the weighings and controls on the scales and transmit them to the computer; carry out product controls in grams and millilitres; carry out destructive and non-destructive controls; automate the control process; control operator errors; support dual-platform scales; carry out two controls at one weighing workstation; synchronise time of the weighing workstations; transfer the “Products”, “Operators” and “Schedules” databases from the computer to the scales; schedule a cyclic product control on the selected scales; set a reminder to take a measurement in an ongoing control with the possibility of using a signalling option; check correctness and determine tare thanks to the average tare module; determine the average tare before each control or at the set interval; record weighings and controls taken from the scales into the computer; monitor the status of scales and controls in the system; disable the measurement recording for tare outside the tolerance range; disable the recording of the net mass measurement outside the tolerance range; exchange data with external systems; use friendly and flexible reporting mechanisms, such as: - generating information on measurements and archived controls from a particular time interval, - data browsing using filtering option, - a summary of selected weighing-related information, - reporting of individual weighings, - determining headers of individual weighing reports, - generating weighing statistics reports, - changing the batch quantity in the control to meet the statutory ranges criteria, - changing the batch number in the control, - adding individual comments to the control report. - export control and weighing reports to files: PDF, HTML, MHT, RTF, XLS, XLSX, CSV, TXT and more; customize the permission levels for different users of the system; customize the graphical interface, reports and graphs; work with external software for stockpiling, billing, accounting, and ERP systems; work with RADWAG weighing systems; select the language of each of the system components; work almost anywhere over Ethernet and Wi-Fi.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).