Hirayama HICLAVE HV-85 Floor-Standing Autoclave, 85L, 208/220/240V

Astell AMA260BT Autoclave Lab This item was removed from a university where it was surplus to requir (more)ement. It is in good cosmetic condition but does not power on, therefore we are unable to conduct further testing, and it is listed as Spares/Repair. This item was manual opened to photograph the interior, there is currently no plug fitted. The previous client has confirmed that it is not in working order. Model- AMA260BTS/N- CLBN52652

This Priorclave Laboratory Benchtop Autoclave Type - PS/MVA/C40 was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and has been fully serviced. It is in full working order. It is in good cosmetic condition with minor marks. External dimensions - D66 W70 H66cmInternal dimensions - D50 W35 H29cm

Yamato SM-820 Large Capacity Sterilizer with Dryer 80L, 100-120V Operating Temperature Sterilization (more) 105°C to 135°C Operating Temperature Drying 135°C to 150°C Internal Capacity 80L Features - Interactive keypad input allows committing sterilization settings to memory - 7″ interactive touch screen - Suitable for protein modification at the maximum operating temperature of 135°C - Easy settings and operation modes for a multitude of sterilization process - Increased safety and function list including forced cooling and memory functions - Equipped with multiple safety locking mechanism for the lid - Comes with large capacity (11L) heat resistant stainless steel container - Alarm buzzer sounds when high or low pressure error occurs "Large capacity, high performance, fully automatic 80L steam sterilization from start to finish with high pressure steam sterilization and drying steps. Interactive keypad input (touch panel) allows committing sterilization settings (time & temperature) to memory 7″ interactive touch screen Suitable for protein modification at the maximum operating temperature of 135°C. Easy settings and operation modes for a multitude of sterilization process. Increased safety and function list including forced cooling and memory functionsEquipped with multiple safety locking mechanism for the lid. Comes with large capacity (11L) heat resistant stainless steel container. Alarm buzzer sounds when high or low pressure error occurs. Sterilizing temp. range 105 to 135°C. Drying temp range 135 to 150°C." INCLUDED: The Yamato SM-820 Large Capacity Sterilizer with Dryer 80L, 100-120V includes: - 2 pcs. stainless steel mesh basket (⌀344 x D300 mm) - Drain board x 1, drain bottle x 1, chemical indicator 1 set, filter x 1, droplet tray x 1 - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Tuttnauer 5075ELVC LabLine Floor Standing Autoclave Introducing the Tuttnauer Autoclave 5075ELVC, a  (more)highly sophisticated and dependable sterilization system that ensures the highest levels of efficiency and reliability. Its robust design and large capacity make it suitable for numerous applications in various industries.The 5075ELVC model features a spacious 160L chamber, boasting a diameter size of 50cm and a depth of 75cm. It is crafted from top-grade stainless steel 316 (1.4571), ensuring durability, while the housing and door material are made of stainless steel 304 L for additional sturdiness.The sterilizer is equipped with a host of accessories that support its operation, including an internal thermometer, a water-sensing electrode, an external pressure gauge, and a printer, all included standard. For recording and transferring data, a USB port is also provided. For user convenience, the sterilizer comes with a set of 2 large wire baskets.Its maximum operating temperature is 135C, suitable for a wide range of sterilization requirements. It runs efficiently on a 3-phase 230V power supply and requires a power input of 9.0KW. Please note that these units do not come with a plug; a NEMA (L15-30P & R or L14-30R & P) will need to be installed.What sets the 5075ELVC apart is its cooling function, which can be activated by connecting the unit to a source of compressed air (1/2" 3-4 Bar [44-58 psi]). Furthermore, the unit also accommodates connections for tap water (1/2" 3-4 Bar [29-44 psi]) and mineral-free water (1/2" 2-3 Bar [29-44 psi] RO or Distilled). The drain requirement is 2" Min Withstanding temperature of 80C (176F).Built for efficiency and long-lasting use, the Tuttnauer Autoclave 5075ELVC represents an exceptional investment for any organization in need of reliable sterilization solutions. However, please note that the unit does not include wheels with a lock feature.Overall dimensions of the unit are 110cm x 86.6cm x 71.5cm or, in inches, 43" x 34" x 28". The part number for this model is 023210990. Trust the Tuttnauer Autoclave 5075ELVC for your sterilization needs, where precision and reliability come standard.INCLUDED: The Tuttnauer 5075ELVC LabLine Floor Standing Autoclave includes: - Power Cord - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Tuttnauer 2540ET Digital Autoclave, 120V Chamber Volume 21L Connectivity 2 x USB Ports, WiFi, Ether (more)net Port Chamber Dimensions 10 x 18 in. (25.4 x 45.7 cm) Features - Ideal for sterilizing glassware, wrapped instruments, and unwrapped instruments - Efficiency with maximum reliability - No dedicated installation connections needed, simply a power source - Monitor & trace your process using Wi-Fi, ethernet connection, USB ports, T-Connect and R.PC.R - Set test cycles and sterilization cycles to start at any time - Does not require a lot of counter top or shelf space - Features closed door drying - Reservoir to be filled with mineral-free water - 3 Year Manufacturer's Warranty

Water bath unstirred thermostatic

Ohaus EX125 Explorer Semi-Micro Analytical Balance The OHAUS EX125 Explorer semi-micro balance has b (more)een designed with the technology to ensure that your very specific weighing results are accurate. Sophisticated laboratories requiring accuracy and looking for innovative technology to obtain measurement results can find both in Explorer semi-micro balances. It has a max weight capacity of up to 120 grams, and a readability of 0.01 mg. Internal CalibrationOHAUS' signature AutoCal internal calibration system provides routine maintenance by automatically calibrating the balance every time it senses a temperature change of 1.5°C or every 3 hours, whichever occurs first. This helps ensure the accuracy of the balance when the operator has not performed a manual calibration or when the proper calibration masses are unavailable. In addition, to minimize weighing errors and ensure accurate measurements, AutoCal utilizes two internal weights to perform a linear calibration. Intuitive Software Provides an Extremely Modern User Experience The EX125 includes many facets of modern technology to provide the best weighing experience possible. The icon-based navigation provides tactile feedback and operates in the same manner as a smart phone or tablet computer. The EX125 Explorer semi-micro balance has been designed and constructed to provide a modern weighing experience as well as to bolster accuracy. Click Here to View Product Video INCLUDED: The Ohaus EX125 Explorer Semi-Micro Analytical Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

RCT basic ETS-D5 Solution Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Setting a (more)ccuracy speed 10 rpm Features - Combines RCT basic magnetic stirrer with ETS-D5 contact thermometer. - Safety circuit limits max. temp. independently of set point. - Heating function switches off if temp. limit exceeded. - Set safety temp. of heating plate remains available. - Hotplate temp. displayed on RCT. - Contact thermometer display can be placed at eye level. The RCT basic ETS-D5 Solution consists of the RCT basic magnetic stirrer and the ETS-D5 electronic contact thermometer making experiments and reactions even safer. Improved temperature controlBy combining the two devices, the internal safety circuit, which is independent of the RCT basic software, can be addressed directly by the contact thermometer. For this purpose, the maximum permissible temperature in the medium is limited independently of the set point temperature. If this value is exceeded, the heating function of the magnetic stirrer switches off via the internal safety circuit - until the device is restarted. At the same time, the stirring function is maintained to avoid boiling distortions. The set safety temperature of the heating plate also remains available. The set temperature limitation of the ETS-D5 and the safety temperature of the hotplate are OR-linked. This means that every potential error leads to the heating being switched off. In addition, the temperature of the heating plate can be set independently of the medium. In this way, you actively influence the heating times. Improved displayWith the ETS-D5, you also enhance the display of your magnetic stirrer. You can see the set and actual value of the medium temperature at a glance with a resolution of 0.1 K on the contact thermometer. The setting accuracy is also refined from 1 K to 0.1 K in this combination. The current hotplate temperature is also displayed on the RCT. Another plus: The display of the contact thermometer can be placed at eye level. This makes it directly visible where the temperature is measured and controlled. In addition to the magnetic stirrer and contact thermometer, the complete solution also includes all the necessary mounting elements.INCLUDED: The RCT basic ETS-D5 Solution includes: - H 16 V Support rod - H 44 Boss head clamp - Screw driver - ETS-D5 - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - RCT basic - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-VAP Core HL/G3 Non Coated Hand Lift w/ G3 Vertical Glassware Features - Clear digital d (more)isplay showing actual and set values - Two separete knobs with dynamic control for setting the rotation speed and heating bath - Accidental changing of the values can be prevented by the lock function - Intuitive LED ring light system makes activated functions clearly visible even from a distance - Easy adjustment of the immersion depth up to 160 mm and the inclination angle from 20° to 80° - Standby function and residual heat warning at heating bath temperatures above 50°C - Available as hand or motor lift models - The standby button stops all functions and, when using a motor lift model, lifts the evaporation flask from the heating bath Temperature of the water bath can be easily controlled by utilizing the right knob on the interface controller. Heating bath temperature can be set from 20 to 210 degrees Celsius. (oil) Heating bath can be easily removed from the system base and contents can be disposed of with ease. Rotation speed of the evaporation flaskcan be easily controlled by utilizing the left knob on the interface controller. Rotational speed can be set from 10 to 280 rotations per minute. .features-side.third img{height:unset;} The Hei-VAP Series of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. The PTFE vacuum seals are highly resistant and can achieve maximum tightness and reduce expensive spare parts. The 210℃ universal heating bath is suitable for all flasks up to 5 liters. Conveniently adjust the angle of inclination between 20° and 80° with a maximum height of 160mm. Corrosion free die cast housing features condensation repellent varnish. The Heidolph Hei-VAP Core features an operating concept that is focused on the essentials: clear and with access to the basic parameters rotation speed and heating bath temperature at any time. Two separate knobs with dynamic control for setting the rotation speed and heating bath temperature: fast turning for large jumps, slow turning for precise setting of the set values. The Intuitive LED ring light system makes activated functions clearly visible even from a distance. Features: - Digital display - Direct access to rotation and heating bath temperature - Lock function - Standby button - Residual heat warning Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Core HL/G3 Non Coated Hand Lift w/ G3 Vertical Glassware includes: - Heating Bath - Control Panel - G3 Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Corepoint Scientific CRTPR061WWW-0 20C to 25C Solid Door Freestanding Undercounter Controlled Room T (more)emperature (CRT) Cabinet Temperature Setpoint Range 20°C to 25°C Capacity 5.2 cu. ft. (147.2L) Defrost Method Cycle Features - Microprocessor temperature controller with digital display for precise temperature management - Interior fan-driven, forced-draft air circulation system for excellent temperature uniformity and recovery - Audible and visual high/low temperature alarms with remote alarm contacts - Three adjustable shelves with guard rails and a bottom footed shelf for air circulation - Right-hinged solid swing door with keyed lock and magnetic gasket for security - LED interior light with switch activation and probe access port - Freestanding thermometer with 3-year calibration certificate and min/max memory - Environmentally friendly HFC-free refrigerant (R600a) and high-density urethane foam insulation The Corepoint Scientific CRTPR061WWW-0 20°C to 25°C Solid Door Freestanding Undercounter Controlled Room Temperature (CRT) Cabinet is designed for precise temperature control and reliable storage. This 5.2 cu. ft. capacity cabinet features a microprocessor temperature controller with a digital display, ensuring accurate temperature management within the adjustable range of 20°C to 25°C. An interior fan-driven, forced-draft air circulation system provides excellent temperature uniformity and recovery after door openings. The cabinet is equipped with audible and visual high/low temperature alarms, remote alarm contacts, and two probes (one in air and one in a sample bottle) for enhanced monitoring. Additional features include a right-hinged solid swing door, three adjustable shelves with guard rails, a bottom footed shelf for air circulation, and a back wall evaporator cover. Security is ensured with a keyed door lock and magnetic door gasket. The unit also includes a freestanding thermometer with a 3-year calibration certificate, min/max memory, switchable °F/°C, an LED interior light, switch-activated light, probe access port, leveling legs, and a powder-coated exterior. It uses environmentally friendly HFC-free refrigerant (R600a) and high-density urethane foam insulation. This cabinet is ideal for storing medications and other sensitive products, preventing unnecessary expenses and product recalls. INCLUDED: The Corepoint Scientific CRTPR061WWW-0 20C to 25C Solid Door Freestanding Undercounter Controlled Room Temperature (CRT) Cabinet includes: - Key for Door Lock - 3 x Adjustable Shelves - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty