Scilogex MicroPette Plus Autoclavable Pipettor, 100-1000ul

The Tuttnauer EHS line of autoclaves uses a steam generator for direct injection of steam into the c (more)hamber which is essential for the high speed performance. A silent water ring pump is an inherent part of the fractionated pre-vacuum and post-vacuum in the drying stage. A water connection is required for operation of the unit.

Tuttnauer Benchtop Autoclave Steam Sterilizer 3850EL-D This was removed from a university lab where  (more)it was surplus to requirements. This Autoclave was inspected by an engineer (St Andrews) The engineer confirmed that the unit was working but required calibration during set-up. The unit has been professionally serviced and re-certified. It is in full working order and has passed all safety checks. It is in excellent cosmetic condition with only minor marks from use.

Yamato SM-501 Sterilizer with Dryer 47L, 115V Operating Temperature Sterilization 105°C to 128°C Op (more)erating Temperature Drying 150°C to 180°C Internal Capacity 47L Features - Automatic operations from sterilization to drying carried out with an interactive key input system - Quick sample drying capability makes samples ready to use right after sterilization - Drying temperature can be set according to sample material, quantity, etc. - Timer range from 1~999 hours - Drain bottle water level can be quickly confirmed on the front panel level indicator - Drain valve located in front for easy access - Absence of protrusions in sterilization chamber makes insertion & removal of baskets, and other items quick and easy - Self-diagnostic functions make operation safer and error recovery quicker - Condensation collector neutralizes high temperature exhaust steam safely High performance, fully automatic 47L standard steam sterilization from start to finish with high pressure steam sterilization and drying steps. Automatic operations from sterilization to drying carried out with an interactive key input system. Quick sample drying capability makes samples ready to use right after sterilization. Drying temperature can be set according to sample material, quantity, etc. Timer range from 1~999 hours. Drain bottle water level can be quickly confirmed on the front panel level indicator. Drain valve located in front for easy access. Absence of protrusions in sterilization chamber makes insertion & removal of baskets, and other items quick and easy. Self-diagnostic functions make operation safer and error recovery quicker. Condensation collector neutralizes high temperature exhaust steam safely. Sterilizing temp. range 105 to 128°C. Drying temp range 150 to 180°C. INCLUDED: The Yamato SM-501 Sterilizer with Dryer 47L, 115V includes: - 2 pcs. stainless steel mesh basket (⌀266 x D315 mm) - Drain board, drain bottle, condensation collection container with magnetic bracket - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato SK-201C Compact Sterilizer 24L, 115V Temperature Setting Range 50°C to 126°C Timer 0 min. to (more) 999 min. Internal Capacity 24L Features - Easy to use - Option for an 18, 24 and 30 liter chamber - Powerful 2000W pipe heater - Easy to read 4 digit LED display - Programmable sterilizing and temperature functions - Timer Setting Range 0 to 999 min. - Water level detection sensor - Safety valve - Safety interlocking interactive device Space-saving, 24L compact steam sterilizer, ideal for research facilities. Easy to use. Powerful 2000W pipe heater. Easy to read 4 digit LED display. Programmable sterilizing and temperature functions. Timer Setting Range 0 to 999 min. Increased safety features: Water level detection sensor with alarm, Overheat Protection, Sensor Lid closure sensor (Inter lock), Pressure Lamp Indicator. Temp setting range 50 to 126°C INCLUDED: The Yamato DG-400C Natural Convection Glassware Drying Oven 92L, 115V includes: - Rack - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Tuttnauer 2340M AutoclaveFeatures - Automatic shut off at the end of both the sterilization and dry (more) cycles. - A long life electro polished Stainless Steel chamber and door. - Double safety locking device prevents door from opening while chamber is pressurized. - Drain valve is located on the front, allowing for quick and easy draining of water reservoir. - Dual safety thermostat to protect against overheating. - International certifications. - 1 year parts and labor warranty. 10 year chamber warranty With the operator in mind, the colorful control panel is both intuitive and easy to use. Control panel includes a pressure gauge, timer, thermostat, and function selector. Tuttnauer manual autoclaves will compliment any healthcare facility and satisfy all of your sterilization needs. With a small foot print of only 545 x 510 x 365mm this autoclave is both efficient and compact. The internal chamber has a volume of 5 gallons (19 liters) and can fit three stainless steel trays. The long-life elecro polished chamber and door are made to last. The Tuttnauer 2340M Autoclave is designed to compliment any healthcare facility. The bright new easy-to-use panel was designed with the operator in mind. The 2340M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. Standard unwrapped cycle Hot start: 13 min., Cold Start 27 min. Cycle times are approximate and may vary depending on instrument loads. INCLUDED: The Tuttnauer 2340M Autoclave includes: - 3 Stainless Steel Trays - Tray Holder - Base Plate - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Scilogex MicroPette Plus 12-Channel Autoclavable Pipettor, 50-300μlThe MicroPette Plus pipettes are  (more)fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Plus 12-Channel Autoclavable Pipettor, 50-300μl includes: - Two Year Manufacturer's Warranty

This Gilson Fraction Collector 203 was removed from a university lab where it was surplus to require (more)ments. The unit powers up but we were unable to test it further. The screen is quite feint. It is in reasonable cosmetic condition with marks from use. Software versions 1.3

The Cedex HiRes Analyzer is a fully automated, image-based cell analyzer providing information about (more) cell concentration, viability, aggregates, and morphological parameters, such as cell diameter and cell compactness. For cell counting the analyzer uses the well-established Trypan Blue Exclusion Method and a high resolution image scanner to analyze cells and objects. Integrated Multi Sampler for single samples and multiple runs High resolution scanner technology Detectable cell diameter 2 – 40 µm Detectable cell density 5×10⁴ – 1×10⁷ Automated cleaning and maintenance procedures Conforms to GMP regulations, such as 21 CFR part 11

Temperature range: 25 – 200°C Temperature stability (at 70°C): ±0.02°C Maximum pump flow: 10 l/min M (more)aximum pump pressure: 0.2 bar Internal dimensions (HxWxD): 200 x 285 x 490 mm Dimensions (HxWxD): 410 x 360 x 590 mm Equipped with a height adjustable submersible platform Platform dimensions (WxD): 250 x 295 mm Height adjustment: 180 mm