Laboklav 160MSLV FA Autoclave Refurbished

Autoclave Engineers Model 300mL EZ Seal w/ Control Tower Lab This system was removed from a universi (more)ty where it was surplus to requirements. Both units are in good cosmetic condition, however, they have not been tested beyond that due to the system being a visual PAT fail, it is being sold for Spares or Repair. Includes the following; 1x Autoclave Engineers unitModel: E010HM0210C112B200121E2101 1x Control towerModel: C1211224300010C

Tuttnauer 2540ET Digital Autoclave, 120V Chamber Volume 21L Connectivity 2 x USB Ports, WiFi, Ether (more)net Port Chamber Dimensions 10 x 18 in. (25.4 x 45.7 cm) Features - Ideal for sterilizing glassware, wrapped instruments, and unwrapped instruments - Efficiency with maximum reliability - No dedicated installation connections needed, simply a power source - Monitor & trace your process using Wi-Fi, ethernet connection, USB ports, T-Connect and R.PC.R - Set test cycles and sterilization cycles to start at any time - Does not require a lot of counter top or shelf space - Features closed door drying - Reservoir to be filled with mineral-free water - 3 Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 0.5-10ul Volume Range 0.5-10uL Adjustable or Fixed V (more)olume Adjustable Volume Accuracy (±%) 1.00/1.50/2.50 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 0.5-10ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 0.1-2.5ul Volume Range 0.1-2.5uL Adjustable or Fixed (more) Volume Adjustable Volume Accuracy (±%) 2.50/3.00/12.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 0.1-2.5ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HVE-50 Economical Floor-Standing Autoclave, 50L, 120V Chamber Volume 50L Sterilizat (more)ion Temperature Range 105°C to 135°C Chamber Dimensions 11.8 x 28 in. (30 x 71 cm) Features - Space-saving design with lid opening upward - Agar sterilization mode for sterilizing agar and then automatically maintaining it at liquid temperature - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C - Agar melting mode for melting agar and maintaining it at liquid temperature, or for a hot, faster start-up - One-touch lever to easily open and close chamber lid - In-process display shows the status and the progress of sterilization cycle - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly The Hirayama HICLAVE HVE-50 Economical Floor-Standing Autoclave, 50L, 120V is a self-contained, portable, floor model mounted on casters. It does not need plumbing for installation, it occupies minimum floor space, operates at 120V, and can be placed conveniently in many locations in the laboratory. Its uses include the sterilization of agar, media, waste, and glassware. The HVE-50 can accommodate a 10-liter fermenter, a 15-liter carboy a 19” x 24” biohazard bag, nine 1-liter flasks, one hundred and eighty 20-mm tubes, or two hundred and seventy 13- mm tubes in three stacking baskets. INCLUDED: The Hirayama HICLAVE HVE-50 Economical Floor-Standing Autoclave, 50L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

A Simple Western size assay is an automated Western – no gels, no transfer devices, no blots, no fil (more)m and no manual analysis. Simple Westerns take place in a capillary. Wes automates all steps of the process for you including sample loading, protein separation, immunoprobing or labeling, washing, detection and data analysis. Up to 25 samples can be processed in a single run. Wes performs Simple Western size-based assays: Immunoassay and Total Protein assay. All you have to do is pipette your samples and immunoreagents into Wes’s pre-filled plate, load the capillary cartridge and press start. Sample Required Total Protein: 0.3-1.2 µg lysate Sample Required Immunoassay Charge: 0.6-1.2 µg Volume Required Total Protein: 3 µL/well Volume Required Immunoassay Charge: 3 µL/well Size or pI Range Total Protein: Molecular weight (MW) ladders range from 2-440 kDa Size or pI Range Immunoassay Charge: Molecular weight (MW) ladders range from 2-440 kDa Sizing CV Total Protein: <10% Sizing CV Immunoassay Charge: <10% Intra-assay CV Total Protein: <15% Intra-assay CV Immunoassay Charge: <15% Resolution (± percent difference in MW) Total Protein: ± 15-20% for MW <20 kDa, ±10 % for MW > 20 kDa Resolution (± percent difference in MW) Immunoassay Charge: ± 15-20% for MW <20 kDa, ±10 % for MW > 20 kDa Quantitation CV Total Protein: <20% Quantitation CV Immunoassay Charge: <20% Dynamic Range Total Protein: 2-3 logs Dynamic Range Immunoassay Charge: 3 logs Sensitivity Total Protein: ng Sensitivity Immunoassay Charge: Low pg Capillary: 5 cm, 100 µm, 400 nL Dimensions (HxWxD): 360 x 360 x 570 mm Weight: 23 kg

Beckman Coulter Rotor Type 50.2 Ti This item was removed from a university where it was surplus to r (more)equirement. It is in good cosmetic condition, we are unable to test it further at our facility. Features:- Type - 50.2 Ti - Max RPM - 50,000 - The Unit Has 12 x Slots For Vials - Only Use in Instruments Classified H, R, S

Newport RS4000 H-Configuration Optical Table Assembly This item is being sold on behalf of a client. (more) It is surplus to requirements. This large optical table system consists of an assembly of 3 Newport RS4000 Metric tables configured in the form of an "H."It consists of 2 x 6 Meter Tables &amp; 1 x Bridge Section 2 Meter Table - full dimensions listed below. Table Dimensions:- Long Tables (2): - Length: 6 metres - Width: 1.5 metres - Thickness: 30 cm - Bridge Section: - Length: 2 metres - Width: 1.5 metres - Total Assembled Dimensions (As shown in diagram): - Length: 6 meters - Width: 4.5 meters Please note that this sale is for the Optic Tables only, the supporting legs are not included. Collection available from Surrey, United Kingdom, but we may be able to arrange shipping for an additional cost. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

This Millipore Guava EasyCyte 8HT Flow Cytometer was removed from a university lab where it was surp (more)lus to requirements. The system powers up and is in good cosmetic condition with only minor marks from use. The unit has been tested with samples but was showing readings of 200-300 when it should be showing readings of around 50000. We were unable to diagnose the exact fault. The unit has a Dell Optiplex 7010 PC paired with it. The PC includes a keyboard, mouse, monitor, USB and VGA Cable. It has had a brand new copy of 32bit Windows 7 installed. Guavasoft 3.1 has also been installed, which includes:ViaCount.InCyte (This requires an unlock code from Millipore to run).easyCheck.Guava Clean 3.1. We have been able to open and close the sample tray. This proves that the system is fully connected. It is sold for spares/repairs.

VACUUBRAND VACUU-VIEW Vacuum Gauge Upper Measuring Limit 1100 mbar/hPa (825 torr) Lower Measuring L (more)imit 0.1 mbar/hPa (0.075 torr) Vacuum Sensors Integrated Features - Highest precision in the range from atmosphere down to 0.1 mbar, perfect gauge for all rough vacuum applications - Compact design with integrated sensor for useful setup in laboratory and process - Chemically resistant ceramic diaphragm sensor, highly reliable at harsh laboratory conditions even in case of aggressive chemicals - Illuminated display, easy to read - Display with menu driven handling easy to use e.g. for unit setting For the monitoring of your vacuum processes in the rough vacuum range, the new vacuum gauges VACUU·VIEW are perfect! Chemically resistant ceramic diaphragm sensor for measurement in the rough vacuum range. VACUU·VIEW provides gas-independent pressure indication with precise capacitive readout.INCLUDED: The VACUUBRAND VACUU-VIEW Vacuum Gauge includes: - Kit Hose Nozzle DN 6/10 mm - Power Supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector, Purge Valve &amp; Shell (more) FreezerFeatures - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large sample loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryer such as the FreeZoneStoppering Tray Dryers (pump and tray dryer sold separately). These modelsoffer the broadest range of built-in options including a shell freezer. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real timedisplay of collector temperature, vacuum level and optional End-Zone™ end pointdetection system, shown on a 5" full color, capacitive touch screen.Models with PTFE-coated collectors that can withstand corrosive compounds areavailable.Features Upright stainless steel collector coil holds 6 liters of ice before defrosting Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time Front viewing window makes monitoring vacuum pump oil hassle free FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 700612300 FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector, Purge Valve &amp; Shell Freezer 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty