LS-LD food autoclave

This listing is for a refurbished Laboklav 25MV Autoclave Incl. commissioning in UK. (outside the U (more)K is possible also, please request and we will try and accomodate) Horizontal device, 25l, glass lid Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 440 x 540 x 660 Chamber dimensions (Ø x d in mm) 265 x 465 Steam generator 2kW Fast re-cooling by air Vacuum incl. pre- and postvacuum, heating during post vacuum 1N 230V, 50Hz, 16A Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status.  Test runs to ensure and check functionality

This autoclave was removed from a university lab as surplus to requirements. We were assured the uni (more)t was in good working order when last used, but was no longer required by the lab. At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used. Type:B-QCS-54260To:BS.2646Capacity:200Maxpressure:25Serial No:2845Date:9-1-06Litres:2006Test Pressure:394Max Filling mass:100kgIntended use:SteriliseProduct group:2Design temp:150 degrees cMax Temp: 138 degrees cMin Temp: N/AVoltage: V00 50/60 8KW

Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle Chamber Volume (more) 3850ELP 65L Sterilization Temperature Range 105°C to 138°C Chamber Dimensions Hei-Clean 21.7 x 23.6 x 19.7 in. Features - Efficiently cleans and dries various labware including beakers, bottles, flasks, and test tubes - HEPA-filtered forced air drying for thorough sanitization - 20 preset programs with capacity for 20 custom cycles - User-friendly color touch screen for easy operation and control - Lower spindle rack with 25 positions and 10 glassware holders - Purified water rinse and built-in water softener - Spray arm and conductivity monitoring - No plumbing required for autoclave operation - 65L chamber volume for large batch sterilization - The 3850ELP Recycles water for efficient operation Introducing the Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle—your comprehensive solution for laboratory sanitation and sterilization. The Hei-Dro Clean 165UC Glassware Washer efficiently cleans and dries various labware, including beakers, bottles, flasks, and test tubes, with HEPA-filtered forced air drying, customizable programs, and a user-friendly touch screen. It features a lower spindle rack with 25 positions, purified water rinse, and built-in water softener. The 3850ELP Autoclave, with a 65L chamber volume, operates without plumbing, recycles water, and offers 4 validated cycles and 16 custom cycles for versatile sterilization. Together, they ensure thorough cleaning and reliable sterilization for all your labware and research needs. INCLUDED: The Tuttnauer 023250041 Hei-Dro Clean 165UC Glassware Washer and 3850ELP Autoclave Bundle includes: - Hei-Dro Clean 165UC Glassware Washer - Tuttnauer 3850ELP Autoclave - Lower Spindle Rack W/ 25 Positions - 10 Glassware Holders - Upper Standard Rack - Purified Water Rinse - Spray Arm Monitoring - Autoclave Stand - Detergent: 023213791 - Neutralizer: 023213793 - Water Softener Salt - Chamber Brite: 023212803 - Printer Paper (Pkg. of 5): 023212200 - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 2-20ul Volume Range 2-20uL Adjustable or Fixed Volum (more)e Adjustable Volume Accuracy (±%) 0.90/1.20/3.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 2-20ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex MicroPette Plus Autoclavable Pipettor, 10-100ul Volume Range 10-100ul Adjustable or Fixed V (more)olume Adjustable Volume Accuracy (±%) 0.80/1.00/3.00 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 10-100ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

SCILOGEX SCI340-ProT Circular LCD Digital Magnetic Hotplate Stirrer, ceramic plate, with PT1000 Sens (more)or & Sensor StandThe SCI340-ProT is one of the most technically advanced hotplate-stirrers in the marketplace and features an independent back-lit LCD display for both heat, stirring and timer functions and PID technology. The MS-H-Pro-T controls temperature at +/- 1ºC. Simply set the timer from 1min to 99hr-59min and the hotplate will heat at the target temperature for the set time period and automatically turn off. If the stirring function is activated, the unit will continue to stir until switched off. The MS-H-Pro-T also has a DC brushless (spark free) motor for extremely long life and excellent performance. SCILOGEX 340°C magnetic hotplate stirrers include all leading safety standards and features for superior ease of use and are cost-effective. They are widely used in chemical synthesis, physical and chemical analysis, biopharmaceuticals, etc.Product Features - Heat only, stir only or heat and stir together functions, High-resolution LCD display shows actual temperatures and speed. - Digital speed control with max. speed up to 1500rpm - External temperature control is possible by simply connecting a PT-1000 temperature sensor (sold separately) with accuracy at ±0.2°C. - Max. stirring quantity of H2O at 20L. - RS232 function provides PC control and data transmission (free software available) - Wide range timer function from 1min to 99h59min (MS-H-ProT only) - The “HOT” warning will flash if the plate temperature is above 50°C even when the hotplate is turned off. - Automatic spin bar retrieval - Low temperature stability - Digital temperature control with max. temperature at 340°C - Stainless steel work plate with ceramic coating provides good chemical-resistant performance. - Accessory reaction blocks for flasks and vessels available sold separately. - Electronic speed control for constant speed even during changes in load - Brushless DC motor is maintenance free. - High magnetic adhesion - Comes with a free 50mm L x 5mm Dia. Magnetic Stir bar. Click Here to View Product Video INCLUDED: The SCILOGEX SCI340-ProT Circular LCD Digital Magnetic Hotplate Stirrer, ceramic plate, with PT1000 Sensor & Sensor Stand includes: - Power Cord - PT 1000 Temperature sensor and stand - Two Year Manufacturer's Warranty

Ohaus Guardian 5000 e-G51HS10C Hotplate Stirrer, 120V The Ohaus Guardian 5000 Hotplates, Stirrers, a (more)nd Hotplate Stirrers are designed for safety and simplicity in all research, academia and industrial applications. The design ensures proper mixing and temperature control of the top plate or your sample when using the optional temperature probe. Heating models include a Single Point Calibration feature for multiple setpoints. Select from five models with three plate sizes for your everyday heating and stirring applications. An industry-leading early detection system that uses two independent safety controls to continuously monitor the electronics and shut off heating before an overtemperature condition occurs. Precise stirring from 60 to 1600 RPM is made possible by the design of a powerful motor, strong magnet and software-controlled ramp rate, ensuring secure magnetic coupling for viscous applications. The bright LCD display includes large temperature and speed settings, intuitive icons and a prominent hot top indicator - all designed to quickly and easily monitor performance from across the lab. The SmartHousing is chemical resistant with an innovative, easy-to-clean design that channels spills away from internal components and the angled control panel. INCLUDED: The Ohaus Guardian 5000 e-G51HS10C Hotplate Stirrer, 120V includes: - Two Stir Bars (40 x 8mm and 28.6 x 8mm) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty