Yamato SK-801 Forced Convection Dry Sterilizer 300L, 115V

Tuttnauer 2540M Autoclave The Tuttnauer 2540M Autoclave is designed to compliment any healthcare fa (more)cility. The bright new easy-to-use panel was designed with the operator in mind. The 2540M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. Standard unwrapped cycle Hot start: 14 min, Cold Start 30 min. Cycle times are approximate and may vary depending on instrument loads. INCLUDED: The Tuttnauer 2540M Autoclave includes: - 3 Stainless Steel Trays - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Hirayama HICLAVE HVE-50 Economical Floor-Standing Autoclave, 50L, 120V Chamber Volume 50L Sterilizat (more)ion Temperature Range 105°C to 135°C Chamber Dimensions 11.8 x 28 in. (30 x 71 cm) Features - Space-saving design with lid opening upward - Agar sterilization mode for sterilizing agar and then automatically maintaining it at liquid temperature - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C - Agar melting mode for melting agar and maintaining it at liquid temperature, or for a hot, faster start-up - One-touch lever to easily open and close chamber lid - In-process display shows the status and the progress of sterilization cycle - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly The Hirayama HICLAVE HVE-50 Economical Floor-Standing Autoclave, 50L, 120V is a self-contained, portable, floor model mounted on casters. It does not need plumbing for installation, it occupies minimum floor space, operates at 120V, and can be placed conveniently in many locations in the laboratory. Its uses include the sterilization of agar, media, waste, and glassware. The HVE-50 can accommodate a 10-liter fermenter, a 15-liter carboy a 19” x 24” biohazard bag, nine 1-liter flasks, one hundred and eighty 20-mm tubes, or two hundred and seventy 13- mm tubes in three stacking baskets. INCLUDED: The Hirayama HICLAVE HVE-50 Economical Floor-Standing Autoclave, 50L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HV-110 Floor-Standing Autoclave, 110L, 208/220/240V Chamber Volume 110L Sterilizat (more)ion Temperature Range 105ºC to 135ºC Chamber Dimensions 16.5 x 31.3 in(42 x 79.5 cm) Features - Space-saving design with lid opening upward - Agar sterilization mode for sterilizing agar and then automatically maintaining it at liquid temperature - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C - Agar melting mode for melting agar and maintaining it at liquid temperature, or for a hot, faster start-up - One-touch lever to easily open and close chamber lid - In-process display shows the status and the progress of sterilization cycle - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly The 25-liter (HV-25), 50-liter (HV-50), 85-liter (HV-85), and 110 liter (HV-110) Autoclaves are self-containers, portable floor models mounted on caster wheels. They occupy minimum floor space and can fit conveniently into many locations in the laboratory. Their many uses include the sterilization of agar, media, wastes, glassware, and fermenters, especially for the larger models.INCLUDED: The Hirayama HICLAVE HV-110 Floor-Standing Autoclave, 110L, 208/220/240V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Boekel Scientific 25515016 Cement Autoclave The Cement Autoclave consists of a welded ASME certified (more) steel cylinder with a bolted cover mounted on a sturdy supporting frame and enclosed in a heat insulated metal housing. The unit is designed to handle pressure in the 60-350 psi (0.4 -2.4 MPa) range and consists of steam vessel, pressure regulator, pressure gauge (0-600psi), air vent valve, power switches, and a safety pop valve set at 350 psi. All components are pressure tested and designed to meet the highest safety standards. The autoclave consists of a welded steel cylinder with bolted cover, mounted on a sturdy supporting frame and enclosed in a heat insulated metal housing. The steel cylinder is fitted with a high temperature gasket and a heavy cover held in place by 16 cap screws bearing upon washers. A T-Handle wrench supplied with the autoclave may be used to tighten the nuts gradually and uniformly to make a leak-proof assembly. The cylinder assembly is designed for a safe working pressure of 525 PSIG, or one and one-half the maximum working pressure. A safety valve set to release at 350 PSIG is provided for protection and modification is not recommended for safe operation. A dial pressure gage indicates the steam pressure in PSIG. Temperature readings are taken with a No. NP22507 thermometer ASTM #2F, which is placed in the thermometer well provided in the cylinder cover. An air-vent valve allows the escape of entrapped air during the early part of the heating period and releases any steam pressure remaining at the end of the cooling period. The autoclave is heated by two electric heaters attached to the cylinder. The heating unit is controlled from a switch panel on the control box. The control box houses the pressureregulator. A main toggle switch controls the entire electrical circuit including the automatic regulator. Separate on-off toggle switches, in series with pilot lights, control the current to the two heating elements. Switch functions are indicated on the switch panel.INCLUDED: The Boekel Scientific 25515016 Cement Autoclave includes: - Wrench, Thermometer, and 5 Gaskets - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Tuttnauer vertical laboratory autoclaves are top loading autoclaves. ELV models have an advanced mic (more)roprocessor control panel and chamber made of 316L stainless steel. Tuttnauer laboratory autoclaves have been designed to provide high quality repeatable performance and accountability for a wide range of applications used in modern laboratories. Vertical lab autoclaves are designed for your convenience and ease of use when vertically loading the autoclave. Chamber Dimensions (ØxD): 280 x 460 mm Chamber Volume: 31 L External Dimensions (WxHxD): 540 x 980 x 440 mm For programs see images

Electro-mechanical lid lock system Dual interlock mechanism Air removal time setting Effective capac (more)ity: 50 L Chamber size (Ø x H): 300 x 710 mm Operation mode: 4 modes (LIQUID with warming, LIQUID without warming, SOLID, DISSOLUTION), one memory for each mode Temperature setting range sterilization: 105°C – 126°C (Variable) Temperature setting range dissolution: 60°C – 100°C (Variable) Temperature setting range warming: 45°C – 60°C (Variable) Time setting range sterilization: 1 min – 250 min, Remaining time is displayed Time setting range dissolution: 1 min – 60 min, Remaining time is displayed Time setting range warming: 20 h (fixed) Time setting range auto-start timer: Program autoclave to start 1 min to 1 week later Exhaust setting: 4 levels from 0 to 3 (Variable), In SOLID mode, it is fixed to level 3 (forced cooling) Exhaust setting: 0% – 100%, Valve opening degree setting for LIQUID mode Maximum working pressure: 0.26 MPa Thermometer: 5°C – 137°C Pressure gauge: 0 MPa – 0.4 MPa Alarms, error display: Low water heating, Temperature sensor wire disconnection, Over-temperature, Over-cool, Over-pressure, Abnormality in lid opening / closing lever lock Dimensions (WxDxH): 547 x 532 x 1045 mm Weight: 57 kg

BIBBY B211 Magnetic Stirrer 1000rpm Overall Dimensions: 24 x 22 x 10 cm Top Plate Dimensions: 24 x 2 (more)4 cm Top Plate Material: Ceramic Shipping Weight: 5 kg Electrical: 230V Speed Range: 1000 rpm

IKA INC 125 FS SP20 Digital Incubator Shaker Temperature Range Ambient +8°C to 80°C Speed Range 10  (more)to 300 RPM Chamber Volume 125L Features - Shaking stroke: 20 mm for optimum oxygen input - The shaker platform can be pulled out halfway (with line indicator) for comfortable and tilt-proof loading - The threaded grid on the platform allows the mounting of fixing clips or STICKMAX adhesive mat for different vessels and sizes - When the door is opened, the shaking function stops automatically - Shaking and temperature control function can be used independently of each other - Simple cleaning of the interior thanks to rounded corners and flat surfaces made of corrosion-resistant material AISI 304 - Decontamination mode for disinfection and reduction of cross-contamination (100/120°C) - Excellent temperature management and optimized energy consumption thanks to very good insulation of the inner chamber and triple-glazed door with window - Internal air circulation can be influenced by electronically adjustable fan speed (0-100%) - Very large LCD display for easy reading - Large viewing window and switchable interior lighting for observation of samples - Counter, timer, and timer auto (temperature-controlled) function to ensure reproducible test conditions The IKA INC 125 FS SP20 Digital Incubator Shaker is the first incubator shaker with a patented removable shaker platform. Without the platform, the unit can be used like a normal incubator. The large inner chamber with a volume of 125 liters offers space for up to 6 grid shelves (without shaker platform). Thanks to high temperature stability and a uniform shaking motion that improves oxygenation, the incubator shaker is the perfect solution for cell cultivation and other microbiological applications. Click Here to View Product Video INCLUDED: The IKA INC 125 FS SP20 Digital Incubator Shaker includes: - Shaker Platform SP20 - IO T 2.10 Wire grid tray, chrome plated (2 pcs.) - Tilt Protection (2 pcs.) - USB A-B Cable - Calibration Certificate at 37°C - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z496-1L-A15 12 x 15ml Conical Insert for Z496-1000-1L Buckets, 2/pk The Hermle Z496-1L-A15 12 (more) x 15ml Conical Insert for Z496-1000-1L Buckets, 2/pk is for use with the Z496-1000-AC Swing Out Rotor and includes two 12 x 15ml adapters. INCLUDED: The Hermle Z496-1L-A15 12 x 15ml Conical Insert for Z496-1000-1L Buckets, 2/pk includes: - 12 x 15ml adapters, 2 per pack - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson PIPETMAN G Large Volume Kit, P5000G, P10mLGThe PIPETMAN G Large Volume Kit provides the two p (more)ipettes to pipette large volumes from 500ul to 10mL. With a redesigned piston assembly, the PIPETMAN G pipettes feature extremely low pipetting forces, improving comfort and minimizing injury. This is all accomplished while maintaining the durability, accuracy, and reliability of the original PIPETMAN pipettes. Premium Pipetting ComfortWith a new seal and lighter springs, the new piston assembly of PIPETMAN G Pipettes significantly reduces the force needed to aspirate and dispense liquids. The benefit is especially helpful during extended pipetting sessions and alleviates common hand stresses caused by repetitive actions. FlexiblePIPETMAN G Pipettes come with a durable stainless steel tip ejector which is ideal for most situations. Plastic tip ejectors are available separately and recommended for working with corrosive substances.CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G Large Volume Kit, P5000G, P10mLG includes: - Two PIPETMAN G Pipettes: P5000G, P10mLG - Two Bags of 10 x Polyethylene Filters - Manufacturer's Documentation - Operator's Guide - 3 Year Manufacturer's Warranty

Benchmark SureTemp Dual Convection 70L Incubator The new SureTemp Incubator series provides the high (more)est level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class. Each incubator is equipped with the SureCheck data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can then be viewed and saved using the included the SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping. Unlike other laboratory incubators, the SureTemp series offers “Dual-Convection” technology, allowing users to choose between mechanical convection mode or gravity convection mode. Mechanical convection incorporates optimally positioned heating elements in conjunction with an internal chamber fan to control the internal temperature. Gravity Convection eliminates any airflow from the chamber, relying solely on the heating elements and gravity to control the internal temperature. The heating elements are strategically located on multiple sides of the chamber and contents can be viewed with the separate inner glass door without disrupting the temperature environment.INCLUDED: The Benchmark SureTemp Dual Convection 70L Incubator includes: - SureTemp Data Logging Software - Internal Power Outlet - 2 Stainless Steel Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty