Labeling

centrifuge rotors or parts, labelling equipment

Sony UP-D895 Video Graphic Thermal Printer Thermodrucker USB GPIB

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€225.00 ex VAT

€267.75 incl. VAT if applicable

Sartorius YDP02-ODV1 Printer for Balance Drucker Waagendrucker

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€125.00 ex VAT

€148.75 incl. VAT if applicable

Mettler Toledo BT-P42 T 2108 Analytical Precision Balance Printer Waagendrucker

Manufacturer: Mettler Toledo Model: BT-P42 T 2108 Analytical Precision Microbalance Printer P/N: 0 (more)0600133 S/N: 1126311716 Inspection due 2019 Description: The BT-P42 is a rugged and simple to operate dot matrix printer for Mettler Toledo balances with an a wireless Bluetooth interface. The printout on normal paper fulfills the requirements of modern quality assurance systems (GLP, GMP, ISO 9001, etc.). These define, among other things, the principles and duties for the user of measuring instruments or inspection, measuring and test equipment. The BT-P42 complies with the principle of traceability of measurements by precisely documenting the origin of data, as well as calibration procedures. It fulfills the obligation to archive measurement results by its thermally stable and lightfast print. On connection to Mettler Toledo balances, the BT-P42 prints all data sent by the balance without restriction, that is not only weight values and calibration procedures, but also the results of all applications, built into the balance. Specifications: - Printing unit: Dot matrix printer 5x9 dots, 24-character line length, Epson IBM character table No. 4- Printing speed: 1 line per second- Ribbon cartridge: Exchangeable, black- Paper roll: Normal paper, 58 x dia. 51 mm, integrated in housing, commercial size- Printer functions: Printing, lightfast and thermally stable (GLP, GMP, ISO 9001), line feed, self-test- Data transmission: Wireless Bluetooth® technology; Max. range of 10 m- Power line voltage, frequency: 230 V, admissible fluctuations –20% +15%, 50/60 Hz- Power consumption: 70 mA- Installation category: II- Pollution degree: 2- Dimensions / Weight (W x D x H): 157 x 210 x 85 mm / net 1.5 kg (incl. paper roll) Items delivered: - Mettler Toledo BT-P42 T 2108 Analytical Precision Microbalance Printer - Instruction Manual as PDF via E-Mail Condition: The printer is in very good cosmetic as well as technical condition, being 100% functional tested. It is ready to be applied.

€300.00 ex VAT

€357.00 incl. VAT if applicable

Raymond A Lamb E22 Cassette Labeller

This listing is for a Raymond A Lamb E22 Cassette Labeller The Cassette MicroWriter System is ideal (more)for automating the referencing of processing cassettes with relevant specimen information – providing a secure method of cassette identification. Controllable via an RS232 serial interface, it is possible to link the unit to a wide range of computer equipment and Bar Code systems. This item was removed from a life science lab as surplus to requirements. Features Should the unit run out of cassettes during the sequence, an audible alarm will sound MicroWriter has a serial interface and is controllable from any device with a RS232 communications port. MicroWriter responds to a restricted set of 127 ASCII characters. Special characters are available upon request including foreign languages and customised symbols. Technical Specifications Hopper Capacity: 75 cassette x 6 Tape: 29mm Wide

£150.00 ex VAT

Zebra TLP 2824 Plus - label printer - Black and white - transfer

Zebra TLP 2824 Plus - label printer - Black and white - transfer Print Speed: Up to 102mm/s max spee (more)d: 203 dpi Dimensions: 13.5 x 24.1 x 17.8cm Weight: 1.6kg Without software With power cable only Year of manufacture: 2015

labelling equipment, printers

Brady BBP33 Schilder- und Etikettendrucker Label Printer

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€1,000.00 ex VAT

€1,190.00 incl. VAT if applicable

Nalgene Oak Ridge 3139-0016 Zentrifugenröhrchen PPCO 16ml with Lid

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€80.00 ex VAT

€95.20 incl. VAT if applicable

laboratory modules, labelling equipment

Sartorius Tacta 3 Mechanical Pipette 0.1 0.1 - 3 µl 1-Kanal Single Channel

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€120.00 ex VAT

€142.80 incl. VAT if applicable

pipettes calibration, labelling equipment

Nalgene Oak Ridge 3138-0016 Zentrifugenröhrchen PP 16ml with Lid

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€90.00 ex VAT

€107.10 incl. VAT if applicable

bottles, labelling equipment

Thermo Scientific 75003660 Set of 4 Lids for TX-200 Swing-Out Rotor

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€250.00 ex VAT

€297.50 incl. VAT if applicable

labelling equipment, centrifuge rotors or parts

Nalgene Oak Ridge 3119-0010 10ml Zentrifugenröhrchen PP-Copolymer max 50.000rcf

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€50.00 ex VAT

€59.50 incl. VAT if applicable

bottles, labelling equipment

Sartorius YDP05-PH Printer Meßwertdrucker Drucker for für PH Meters Docu-pH+

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€200.00 ex VAT

€238.00 incl. VAT if applicable

Sakura Ident VSP-3001 Tissue-Tek AutoWrite Kassettendrucker

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€1,200.00 ex VAT

€1,428.00 incl. VAT if applicable

RUDOLF ERNST torque meter for screw caps

RUDOLF ERNST torque meter for screw caps range: up to 4 Nm (35 Torque Inlbs) Rotation in 2 direction (more)s torque meter

torque testers, labelling equipment

Biosart 100 Monitor, 100 ml, CN Membrane, white-black, 0.45um, individually packaged, 47pcs

Biosart 100 Monitor, 100 ml, CN Membrane, white-black, 0.45um, individually packaged, 47pcs Sartoriu (more)s Biosart 16401-47-06-ACK Individually Packaged Filtration Monitor, White Cellulose Nitrate Membrane with Black Grid, 100ml Volume, 0.45µm Pore Size (Pack of 47) Quantity available: 2 boxes Please note expiry date expired: 03/2023

WTW OXI 3205 portable oximeter + Cellox 325 probe

WTW OXI 3205 portable oximeter + Cellox 325 probe With Cellox 325 probe Waterproof dissolved oxygen (more)measuring instrument Battery type: 4 x 1.5 V AA rechargeable batteries or 4 x 1.2 V NiMH rechargeable batteries Compensation and correction of atmospheric pressure: Automatic from 500 to 1100 mbar Protection class: IP 67 Screen display: backlit graphic LCD Dissolved O2 measuring range: 0.00 to 90 mg/L Dissolved O2 accuracy: ±0.5% Dissolved O2 resolution: 0.01, 0.1mg/L Temperature precision/accuracy: ±0.1°C Working/Operating/Use Temperature: -5 to 50°C Net weight: 2KG

Spinning top lift BOY 08 510.00 PROLABO 20 x 20 cm

Spinning top lift BOY 08 510.00 PROLABO 20 x 20 cm Lifting support, lifting table for laboratory Tab (more)letop dimensions: 200 x 200 mm With traces of wear

labelling equipment, general laboratory equipment other

Beckman Beckman JA-20.1 Rotor

Refurbished Beckman JA-20.1 Rotor. 6 months warranty. The Beckman JA-20.1 fixed angle rotor is used (more)with Beckman J2 and J6 series and Avanti J series centrifuges. The JA-20.1 can reach speeds up to 20,000 RPM with a max RCF of 51,500 x g. Capacity is 32 x 15ml. Technical data: - Maximum Speed: 20,000 rpm - Maximum RCF at r max (g): Outer Row: 51,500 x g; Inner Row: 43,900 x g - k-Factor: Outer Row: 371; Inner Row: 465 - Nominal rotor capacity: 480 ml - Capacity: 32 x 15 ml tubes

€2,900.00 ex VAT

labelling equipment, centrifuge rotors or parts

Lab Oven STF-F 120 FALC

A laboratory oven with forced ventilation and an exceptional quality/price ratio! 100% Made in Italy (more) and with all accessories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS: - External structure in steel painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD: - PID thermoregulator with double display and adjustable temperature up to 300°C - 2 shelves - pipe on the back for exhaust fumes with front opening/closing adjustment device - 10 mm hole on the upper side - Digital timer from 0 to 99 hours and 59 minutes + ∞ - Indication of the power used - Auto-tuning (automatic temperature calibration) - Possibility of manual temperature correction (e.g. with certified thermometer) - Safety class DIN 3.1, the highest - Manual adjustment of the over-temperature alarm - IP protection: 42 Laboratory Oven STF-F 52 FALC Forced Ventilation

€2,015.56 ex VAT

€2,398.52 incl. VAT if applicable

Italy

ovens, labelling equipment

12 Piece Lab Glassware Collection Buchi, Schott Duran, Lenz, Pyrex, Volac, etc

12 Piece Lab Glassware Collection Buchi, Schott Duran, Lenz, Pyrex, Volac This large lot of laborato (more)ry glassware was removed from a university lab where it was surplus to requirements. All items are in good cosmetic condition with no damage present. Includes the following: 1 x Buchi 19/38 2 litre cold trap with inner sleeve1 x small Buchi rotary distillation glass svl22 19cm centre column, 250ml bulb1 x Volac c24/20 2 litre long necked flask2 x Volac c19/17. 1 litre long necked flask1 x Pyrex 2 litre conical flask with top spout outlet1 x Kontes Ultra-Ware 4 litre conical flask with stopper and side outlet1 x Schott Durran 1 litre separatory funnel with tap1 x Schott Durran 500ml separatory funnel with tap1 x Jay Tech 500ml separatory funnel with tap1 x Interfon 500ml separatory funnel with tap1 x Interkey 500ml column

£300.00 ex VAT

laboratory glassware, labelling equipment

3 x Kino Flo Diva Lite 201 Lighting Systems

3 x Kino Flo Diva Lite 201 Lighting Systems These Kino Flo Diva Lite 201 Lighting Systems were remov (more)ed from a university lab where they were surplus to requirements. All items are in good cosmetic condition and powered on, unable to test further.

£300.00 ex VAT

labelling equipment, lighting

3 x Kino Flo Diva Lite 401 Lighting Systems

3 x Kino Flo Diva Lite 401 Lighting Systems These Kino Flo Diva Lite 401 Lighting Systems were remov (more)ed from a university lab where they were surplus to requirements. All items are in good cosmetic condition and powered on, unable to test further.

£400.00 ex VAT

lighting, labelling equipment

Pair of FluidX XTR-Single Tube Readers Lab

2 x FluidX XTR-Single Tube Reader Lab These items were removed from a university lab where they were (more) surplus to requirements. Both items power up and are in good cosmetic condition.

£500.00 ex VAT

labelling equipment, laboratory modules

Heraeus Instruments Labofuge 400R Function Line Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Heraeus Instruments Labofuge 400R Function Line Lab This item was removed from a university where i (more)t was surplus to requirement. It is in fairly poor cosmetic condition and powers on, however, due to an issue with the cooling/heating element it did not reach any desired temperature when tested. Therefore, it is listed as Spares/Repair. Additionally, it was tested to its maximum speed of 4500RPM, which performed well with no issues.

£500.00 ex VAT

centrifuges, labelling equipment

BioPharma Dynamics Tube Spool Stand Lab

BioPharma Dynamics Tube Spool Stand This was removed from a university lab where it was surplus to r (more)equirements. The unit is in good cosmetic condition with minor marks. Tube spool stand that holds and contains 3 x Spools. The spools were made for Sanitech Ultra 1/4" x 3/8" Cured Silicone 250 (Not included).

£535.00 ex VAT

labelling equipment, general laboratory equipment other

Morso DK 8900 Randers Manual Guillotine

Morso DK 8900 Randers Manual GuillotineModel: DK 8900 This was removed from a university lab where i (more)t was surplus to requirements. It is mechanically sound. It is in reasonably good cosmetic condition.

£600.00 ex VAT

plastics equipment, labelling equipment

Orbit Marine Division AL-7100-SDU-MK2 Servo Driver Unit Lab

Orbit Marine Div AL-7100-SDU-MK2 Servo Driver Unit This was removed from a university lab where it w (more)as surplus to requirements. It is in good cosmetic condition but has not been tested at our facility.

£700.00 ex VAT

labelling equipment, motion control equipment

Lot of 13 New Ergotron NeoFlex Desk Mount Tablet Arms 45-306-101

Lot of 13 New Ergotron NeoFlex Desk Mount Tablet ArmsModel 45-306-101 These items were removed from (more)a university where they were surplus to requirement. All items are new in their original packaging. 2 of the boxes have been opened, all the rest are sealed. Vesa mounting interface 100 x 100mm and 70 x 70mmMax load 1.1 Kg

£750.00 ex VAT

labelling equipment, medical furniture

HTA Xdc-96pro HT112E Automated Capper for 96 Well Format Sample Storage Tubes

HTA Xdc-96pro HT112E Automated Capper for 96 Well Format Sample Storage Tubes This was removed from (more)a university lab where it was surplus to requirements. The unit powers up and runs through the start sequence without fault. It is in good cosmetic condition with marks from use.

£805.00 ex VAT