Laboratory equipment

Heraeus Kelvitron B 6030 Incubator This item was removed from a university lab where it was surplus  (more)to requirements. It is in fair cosmetic condition and powers on. The unit has been tested and is in good working order (thermometer not included). Specifications:- Model: B 6030 - Serial No.: 51017988

Industrial Workbench with Drawer and Shelving This item was removed from a university lab where it w (more)as surplus to requirements. The workbench is well-used, showing signs of wear typical of an industrial or workshop setting. It has served as a welding station and includes a protective cover, though this is in poor condition and displays holes from where a vice was previously fitted. The drawer opens stiffly, and the surface has scratches and marks from usage. Specifications:- Tabletop/Work Area Dimensions: 184 cm x 76 cm - Back Shelf: 183 cm x 9.5 cm - Bottom Storage Area: 137 cm x 63 cm

Hybaid Maxi 14 Rotisserie Hybridisation Oven This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order when heated to 36ºc, when set to 100ºc item would not climb beyond 60ºc. The shaking plate and Rotisserie shaker are both in good working order. It is in reasonably good cosmetic condition with surface damage present.

Hybaid Maxi 14 Rotisserie Shaking Hybridisation Oven This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. Shaking platform 33 x 33cmInternal dimensions 35 x 32 x 51cmRotisserie 10 x 35mm bottles

This LMS Cooled Benchtop Laboratory Incubator was removed from a university lab where it was surplus (more) to requirements. The unit powers up and has been tested with a digital thermometer (not included) The dial was set to the minimum of 0 and it dropped as low as -6˚c after running for a few hours.When the dial was set to maximum, the thermometer read 42.7°c after running for around 6 hours. The item is in a reasonable, used cosmetic condition with some minor marks from use. Internal dimensions - D33 W45 H53cm

This LMS Cooled Laboratory Incubator Model: 305 was removed from a university lab where it was surpl (more)us to requirements. The item is in reasonable cosmetic condition but the door has rust marks and scratches. The exterior also has scratches and dents. The red light is loose and not secured and there is some mould along the seal. We had a note from the lab saying there was an issue when setting the temperature. Setting it to refrigerate was a little temperamental but it does work. Internal dimensions:36cm D x 46cm W x 54cm H It was tested with a digital thermometer (not included)When set to -10˚C, the display showed -6.1˚C and the thermometer measured -8.7˚CWhen set to 37˚C, the display showed 37˚C and the thermometer measured 34.7˚CWhen set to 50˚C, the display showed 50.2˚C and the thermometer measured 47.6˚CWhen set to 4˚C, the display showed 7.3˚C and the thermometer measured 4˚C

This Nikon DN100 Digital Net Microscope Camera Controller was removed from a university lab where it (more) was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with some marks from use. Included with it are;1x Integral compact flash card1x Camera control unit remote1x Camera serial cable1x Logitec computer mouse

This Buchi Drying Glass Oven  Type - B-585 was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and was tested with a digital thermometer (not included). When set to 40˚C he thermometer measured 32˚C.When set to 100˚C  the thermometer measured 80˚C.When set to 200˚C the thermometer measured 173˚C. It was not tested higher for safety reasons. The item is in a reasonable, used cosmetic condition but the glass needs a good clean inside.

This UVP BioImaging Systems AutoChemi System was removed from a university lab where it was surplus  (more)to requirements. Included are; UVP BioImaging Systems Autochemi SystemPN - 97-0150-02Powers on Auto Chemi DarkroomPN - 95-0351-02 Gepe G-2004 Light Panel12" x 8" PicturePowered on when tested with our 12vdc power supply (not included) but it didn't power on via the main unit UVP Auto Zoom LensComputar TV Zoom LensM6Z1212MP3 12.5-75mm 1:1.2 Hammatsu Photonics CameraModel - C8484-51-03GTHe unit does not power up Software:-UVP Labworks Image Acquisition & Analysis Software Ver. 4.5Labworks Capture Support CD Ver. 4.5 Manuals:-User ManualLabworks 4.5 Reference GuideLabworks 4.5 Auto-Pro ReferenceLabworks Start up Guide/Image Database Guide/Report GeneratorAC1 Auto Darkroom Operating Instructions The item in in a good, used cosmetic condition but is unable to be tested any further than powering on at this point. Please note: The software requires a USB dongle which is not included.The software will only run in demo mode without this!

Mettler Toledo 20KG M1 Class Calibration Weight This was removed from a laboratory where it was surp (more)lus to requirements. The unit is in good cosmetic condition but the case has been cracked slightly.

This RADIANCY SpaTouch II Laser was removed from a fashion college where it was surplus to requireme (more)nts. The unit powers up but the lamp is not working. It has not been tested further. It is in reasonably good cosmetic condition but has some marks from use. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

This Labnet Vortemp 56 Microplate Shaking Incubator was removed from a university lab where it was s (more)urplus to requirements. The item powers on and runs up to 120rpm. It was tested with a digital thermometer (not included).When the temperature was set to 37˚c, the thermometer read 35˚c.When the temperature was set to 99.5˚c, the thermometer read 94˚c.Both temperatures were reached relatively quickly. It holds 56 x 2.0ml tubes. The item is in reasonably good used cosmetic condition with marks and scratches.

Coulter ZM Cell Counter,  S.ST.II Sampling Stand & V.C.U. VWII Vacuum Container This syste (more)m was removed from a university lab where it was surplus to requirements. Included are; 1x Coulter Counter ZMModel No. Z.M .The unit powers on and is in good cosmetic condition. There are some tape marks from general use. All knobs, dials and buttons are responsive to the unit.Both digital LCD screens are working and display well. 1x Coulter Sampling StandModel No. S.ST.IIWe were unable to power up the unit. Both the fuses were fine. 1x Coulter VW iiModel VCUThe unit is in good cosmetic condition, it has 2x 500ml glass jars with lids housed inside it. These lids have 2x hoses attached to them. Manuals:9x manuals are in good cosmetic condition and appear to be complete1x Datasheet book.

This SYNGENE GeneFlash Gel Imaging System with PULNiX TM-300 Camera was removed from a university la (more)b where it was surplus to requirements. The system powers up and is in full working order, though one of the bulbs in the transilluminator needs replacing. It is in good cosmetic condition with minor marks from use. Camera PULNiX - TM-300Transilluminator - GVM200 Internal dimensions - 35 x 37 x 40 cm

Mettler Toledo 20KGF2 Class Calibration Weight This was removed from a laboratory where it was surpl (more)us to requirements. The unit is in good cosmetic condition but the case has marks and cracks from use.

ELGA PURELAB Ultra GE Genetic MK2 Water Purifier Purification System This was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. Max Pressure inlet - 0.7/10Max Pressure Working - 5.5/80 Comes with : 2 X ELGA Labpure S1 - Part No. LC1822 X ELGA Sanitisation Block - Part No. LA6981 X UV Filter1 X ELGA Ultrafiltration Cartridge - Part No. LC151

This Bio-Rad DNAEngine Peltier Thermal Cycler Model PCT0200 was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. It is fitted with a 96 well block.

Axon Instruments Axopatch 200B Integrating Patch Clamp Amplifier Lab This item was removed from a un (more)iversity where it was surplus to requirement. It is in good cosmetic condition and powered up, we are unable to conduct further testing at our facility.

LEP MAC5000 73005020 Microscopy Stage Motor Controller Power Supply This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. Model MAC 5000 73005020Serial No. 127383

Applied Biosystems/MDS SCIEX Analyst® Software Metabolite ID This was removed from a university lab  (more)where it was surplus to requirements. It has not been tested. The item is in reasonable cosmetic condition.There are some scratches/marks visible on the disc's back.

Applied Biosystems/MDS SCIEX Pro ID Software This was removed from a university lab where it was sur (more)plus to requirements. It has not been tested. The item is in good cosmetic condition. There are scratches on the jewel case and signs of age on the booklet, however, there are no marks on the back of the disc.

Applied Biosystems/MDS SCIEX Pro ICAT Software for use with ICAT™ Reagents P/N 028450SW100 This was  (more)removed from a university lab where it was surplus to requirements. The item is in good cosmetic condition. There are scratches on the jewel case and signs of age on the booklet. There are no marks on the back of the disc. The item is untested.

Applied Biosystems/MDS SCIEX  BioAnalyst® 1.1.5 Software This was removed from a university lab (more) where it was surplus to requirements. P/N 1014362 The item is in reasonable cosmetic condition. There are some minor marks on the disc. The case has some signs of wear. Also included are the following:1x Pro ID Software 1.1 Release Notes1x Validation Certificate, dated 05/01/20051x Pro ID Software License Agreement

This Molecular Devices Skatron Embla Microplate Washer was removed from a university lab where it wa (more)s surplus to requirements. The unit is in reasonably good cosmetic condition with some marks from use. It powers up but we were unable to test it further at our facility.

Mettler Toledo 20KGF2 Class Calibration Weight This was removed from a laboratory where it was surpl (more)us to requirements. The unit is in good cosmetic condition but the case has marks and cracks from use. The top of the case is broken.

Nikon Microscope Power Unit V-PS100E This was removed from a university lab where it was surplus to  (more)requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks.

Gallenkamp Economy Incubator With Fan Size 1  INA.306.010J Lab This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside.

PFEIFFER Turbomolecular Vacuum Pump TMH 262-005 with TC100 Controller This was removed from a univer (more)sity lab where it was surplus to requirements. PFEIFFER Turbomolecular Vacuum Pump:Model TMH 262-005DN 100 ISO -K, 3P The unit is in good cosmetic condition. The fan blade appears to move freely but it has not been powered up.

This Applied Biosystems ABI Prism 7700 Sequence Detection System  Model - 7700 was removed from (more) a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further. It is in reasonable cosmetic condition but has marks from use. Pre-installation ManualPlanned Maintenance ProtocolSite Preparation & Safety Guide

Mettler Toledo 20KG M1 Class Calibration Weight This was removed from a laboratory where it was surp (more)lus to requirements. The unit is in good cosmetic condition but the case has marks from use.