Eppendorf Mastercycler pro 384 Thermal Cycler

Block format: 96 well Sample volume: 5 – 80 µl Lid temperature: 30 – 99°C Temperature gradient: 40°C (more) Max heating rate: 6.0°C/sec Avg haeting rate: 5.0°C/sec Max cooling rate: 4.5°C/sec Avg cooling rate: 3.5°C/sec Ramp adjustment: 0.1°C/sec Block temperature uniformity (15 sec after clock starts): ±0.15°C at 55°C, ±0.25°C at 72°C, ±0.50°C at 95°C Temperature range: 3°C to 99°C Control accuracy: ±0.10°C Temperature increments: 0.1°C/cycle Time increments: 1sec/cycle Sensistivity: 1 nmol/l FAM at 30 µl sample volume Measuring time: 96 well plate (single measurement, 6 colors) aprx 6 sec Measuring range: ±130.000 (±17 bit) Light source: Three long living high power LEDs (blue, white, red) Filter: Filterwheel with stepping motor, 6 positions for color modules Detector: Higly sensitive channel photo multiplier (CPM), Optimal signal/noise ration by effective noise reduction (decreased SNR (signal/noise ratio) technology) Heated lid: manual opening mechanism, automatic pressure application Contact pressure heated lid: 10 kg, automatic Dimensions (WxHxD): 280 x 380 x 430 mm Including software

The TRobot PCR Thermal Cycler from Biometra is an automated PCR machine specifically designed for in (more)tegration in robotic environments. This robotic PCR machine uses a small amount of bench space and consists of two separate parts; the block module which can be placed in the robotic enclosure, and the controller which can be located outside of the PCR workstation for easy access. The block module features a motorized heated lid and a uniquely designed motorized plate lifter to elevate plates from the block for easy removal. In addition, the TRobot Manager Software can be directly linked to any origin robot software, allowing for quick, easy access to all thermocycler functions. Overall, the TRobot is an efficient PCR machine that delivers high sample throughput making it the perfect solution for integration in robotic systems. Block Capacity: 96 x .2ml tubes; 96 well microplates; strips of 8 tubes Block Material: Silver block with gold coating (96 well) Temperature Range: -3 to 99ºC Temperature Gradient: No Max. Heating Rate: 3.5ºC/sec Max. Cooling Rate: 2.5ºC/sec Temperature Uniformity: +/- 0.5ºC Control Accuracy: +/- 0.1ºC Lid Temperature Range: 30ºC to 99ºC Temperature Uniformity of Air Cushion: Highest homogeneity Lid Height Adjustment: Motorized lid and motorized plate lifter Program Memory: 250 average programs; unlimited on PC Auto restart after power failure: Yes Noise Emission: Very low Dimension (W x H x D): 17 x 23 x 20 cm (thermocycler) 19 x 44 x 125 cm (controller) Weight: 5.9 kg (thermocycler) 7.0 kg (controller)

Block: Gold anodized 96 well block Maximum Heating Rate: 3.5°C/sec Maximum Cooling Rate: 2.5°C/sec A (more)vg Heating Rate: 3.0°C/sec Avg Cooling Rate: 2.0°C/sec Temperature Uniformity at 55°C: ± 0.2°C within 15 sec Temperature Uniformity at 70 °C: ± 0.3°C within 15 sec Temperature Uniformity at 95 °C: ± 0.6°C within 15 sec Block Temperature Range: 3°C to 99°C Gradient Temperature Range: 20 to 99°C Control Accuracy: ± 0.1°C Programming: Easy spreadsheet programming Memory: 350 typical programs in up to 30 user directories (password protected) Auto restart after power failure: Yes Heated Lid: High Performance Smart Lid (HPSL) Lid Temperature Range: 30 to 99°C Dimensions (WxDxH): 280 x 380 x 240 mm Weight: 13 kg

IKA DB 6.1 Individual PCR Tube Strip Dry Block (0.2 ml tubes))

Accuris PR2121-N-1000 qMAX Probe One-Step RT-qPCR Kit, No Rox, 1000 Reactions qMAX Probe One Step Mu (more)ltiplex kits are specifically developed and optimized for efficient probe-based detection of multiple targets in a single reaction well. The Multiplex formulation is comprised of a 20x reverse transcriptase and 2x PCR Mix preparation ideally suited for complex RNA samples including low-copy number viral RNA commonly used in the clinical and research laboratory. INCLUDED: The Accuris PR2121-N-1000 qMAX Probe One-Step RT-qPCR Kit, No Rox, 1000 Reactions includes: - Accuris PR2121-N-1000 qMAX Probe One-Step RT-qPCR Kit - No Rox - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris PR1100-100 One-Step RT-PCR kit, 100 Reactions The Accuris One-Step RT-PCR Kit has been formu (more)lated for cDNA synthesis and subsequent PCR in a single tube for end-point analysis. This latest generation RT-PCR Kit consists of an MMLV-derived, thermostable Reverse Transcriptase (45°C to 55°C), an advanced RNase Inhibitor and Accuris Hot Start Taq for ultra-sensitive one-step RT-PCR from as little as 1pg total RNA starting material. The optimized buffer chemistry allows for efficient reverse transcription and PCR of problematic sequences with significant secondary structure (such as GC-rich targets). The Accuris One-Step RT-PCR Kit is ideal for determining the presence or absence of RNA templates and quantifying expression through qualitative analysis of RNA transcription levels. The kit also efficiently synthesizes double-stranded cDNA for subsequent gene expression analysis. INCLUDED: The Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml) includes: - Accuris One-Step RT-PCR kit, 100 reactions - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The iBlot 2 Gel Transfer Device is an integral part of the iBlot 2 Dry Blotting System, which consis (more)ts of the transfer device and consumable transfer stacks that contain the required buffers and transfer membrane (nitrocellulose or PVDF). Complete protein transfer in 7 minutes or less High detection sensitivity and even transfer Increased blotting reliability and reproducibility Flexible gel size formats and membrane types A simple, user-friendly system Options to create new custom programs Built-in tutorial and application notes High-quality transfer stacks that are more compact than before Rapid, High-quality Protein Transfers For dry electroblotting of proteins from mini-, midi-, and E-PAGE gels onto nitrocellulose or PVDF membranes for Western detection Offers high-quality transfer, convenience, and speed, producing crisp, clear bands that remain sharp and straight, with exceptional transfer efficiency Allows users to create custom programs Membrane Compatibility: Nitrocellulose, PVDF Throughput: 1 Midi or 2 Mini Gels Running Dimension: Horizontal For Use With (Application): Western Blot Gel Compatibility: Bolt Bis-Tris Plus Gel, E-PAGE Gel, Novex Midi Gel, NuPAGE Gel, Novex Mini Gel Mode of Transfer: Dry Running Time: ∼7 min Dimensions: 370 x 200 x 110 mm Weight: 2.3 kg

10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights These were removed f (more)rom a university lab where they were surplus to requirements. Each item powers on and is in good working order. They are all in good cosmetic condition with minor marks. Includes: 10 x  Ohaus 200g weights10 x power supplies4 x manuals These scales also have the option to be operated with AA batteries Max 300gModel number- TA301

This Thermometric 2277 Thermal Activity Monitor (TAM) System was removed from a university lab where (more) it was surplus to requirements. The unit powers up but it was not tested further. There is a light flashing "pump failure". We are unsure if this is a fault, or if it is due to the parameters in which it was tested. It is in reasonably good cosmetic condition with some marks from use. It comes with two covers for the control panel.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Beam scales H315/4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the H315/4P2/H scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales H315/4P2/H series is manufactured in stainless steel version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 in stainless steel housing, featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

KNF LABOPORT N 840 G Diaphragm Pump Ultimate Vacuum 6 mbar Maximum Flow Rate 34L/min (2.04 m3/h) Pr (more)otection Class IP30 Features - Adjustable speed control - ATEX compliant to (Ex) II 2/-G IIB+H2 T3 internal atmosphere only - Ideal for extremely aggressive/corrosive gases and vapors - Chemically-resistant PTFE/FFPM flowpath - Clean, 100% oil-free operation - Compact, quiet and reliable - Maintenance-free - Small footprint to optimize workspace The KNF LABOPORT N 840 G Diaphragm Pump is a chemically resistant, compact and oil-free diaphragm vacuum pump with manual speed control for adjusting the pump capacity to your specific application. It features a gas ballast, PTFE/TFM heads, PTFE-coated diaphragms and FFPM valves. Suitable for a wide range of Laboratory applications including extremely aggressive/corrosive gasses and vapors. INCLUDED: The KNF LABOPORT N 840 G Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty