Wave Biotech Bioreactor 20/50 Controller Control Unit Display

This Applikon My-Control Z310210011 Bioreactor Controller was removed from a university lab where it (more) was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with marks from use.

This Sonimat Ultrasons GP20 with Monitor/Terminal was removed from a university lab where it was sur (more)plus to requirements. The units power up and the monitor/PC unit is working but an alarm sounds. There don't appear to be any programmes/apps loaded onto the system.

This Biometra TGGE System with Controller and TGradient was removed from a university lab where it w (more)as surplus to requirements. All units are in reasonably good cosmetic condition and powered up, unable to test further at our facility. System includes: Biometra TGGE SystemSerial Number: 1506138 Biometra TGGE System ControllerSerial Number: 1203176 Biometra TGradientSerial Number: 1910339

VACUUBRAND VACUU-Select Complete Benchtop Controller Upper Measuring Limit 810 torr Lower Measuri (more)ng Limit 0.1 torr Accuracy Less than +/- 1 mbar/hPa/torr Features - Supplied complete and ready for use, including integrated valve and common hose connections - Predefined vacuum applications and automatic boiling point detection saves time - Simple setup - connect VACUU·SELECT in-line between pump and vacuum application - Integrated vent valve allows inert gas connection - Integrated check valve minimizes interaction with other applications on the same vacuum supply The VACUU·SELECT complete controller provides enhanced process efficiency to applications supported by a vacuum source such as a basic pump or a powerful vacuum network. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run pre-defined applications at the touch of a button, or create your own application with simple drag-and-drop editing. The controller is available as a benchtop unit, ready for mounting on lab scaffolding, or as a built-in version for lab casework. The integrated controller includes the VACUU·SELECT vacuum controller, a check valve, and a chemical-resistant solenoid isolation valve. The ceramic vacuum sensor and venting valve are built right into the body of the VACUU·SELECT controller. The compact unit is easy to install and setup. With its intuitive, application-based interface, the controller offers predefined vacuum processes for all common laboratory applications. In the case of solvent evaporation, it detects the boiling pressure and then holds the pressure level stable using two-point control.INCLUDED: The VACUUBRAND VACUU-Select Complete Benchtop Controller includes: - VACUU·SELECT complete controller bench-top device - Solenoid valve - Non-return valve - Integrated ceramic diaphragm vacuum sensor - Venting valve - Power supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The roller scale is designed for weighing heavy, large-size packages such as pallets or crates. It a (more)llows for final product mass control before it enters the warehouse or is transported to the customer. Depending on the application, the scale can be made in a powder-coated version, dedicated for use in warehouses, or in a stainless-steel version, intended for use in wet environments. Operation Ergonomics The scale has a large 10-inch touch screen, which is comfortable and intuitive to use. Operation of the roller scales does not require additional training, as the software of all RADWAG checkweighers is unified. Select an Interface That Your Production Line Supports RADWAG roller scales offer the option of using one of four industrial interfaces, depending on your requirements. All our interfaces allow you to: start and stop the dynamic weighing procedure remotely (Start and Stop function), enter the batch number (Batch Number Readout function), select a product (Select Product During Standstill function). Do You Want Your Scale to Work With a Barcode Scanner? Our roller scales are compatible with barcode scanners: 1D and 2D, manual and automatic. Data contained in one-dimensional (bar) barcodes can be read using 1D scanners. 2D scanners, on the other hand, can read 2D codes, which are large amounts of data encoded in images composed of black and white squares. You can use our scales if you have a manual or automatic scanner mounted above your production line. Roller Scale and Printer – The Perfect Combination Do you use a RADWAG roller scale but not a printer? You have no idea what you are losing. You can easily print a ready report (e.g. statistical or PGC) at any time thanks to the direct connection between the scale and a printer. Do you require product parameters or information on a specific operator? Just select, press “print”, and you’re done. The automatic printout function allows you to receive an automatic frame, i.e. information sent to your computer or printer, immediately after weighing. What does this mean for you? Possibility of recording weighings in real time. You can customise the automatic frame based on your preferences. What do you need? Mass? Product code? Date? You got it. Weigh the Product and Print the Label Do you print labels to identify products in your company? If so, you understand how time-consuming and tedious your work would be without a label printer. We have some exciting news for you: RADWAG roller scales are compatible with label printers. Our product range includes a label printer that can print thermal and thermal-transfer (paper, foil) self-adhesive labels. The printer communicates with the roller scale via Ethernet or RS 232. Capability to Record Measurements The local SQL database system and integration with the multifunctional server software E2R Checkweigher allow measurements to be recorded and processed. Does Your Line Require Special Control Algorithms? The RADWAG roller scales software allows you to adjust the scale operation to the specific requirements of your line. Approval The scale is MID approved. Custom Designs The scale can also operate in feeder mode by controlling the feeding valves.

one electric stirring device.... complete with motor... coaxial plug and 4 x propeller can be used f (more)or Liquid Flow Controller( i.e. LFC-101 ) and other Laboratory Instruments precision DC Motor drive , adjustable continuously by voltage control instrument is in used, like NEW cosmetic condition and 100 % functional tested

Boekel Scientific 270400 Jitterbug 2 - MicroplateThermo Shaker 2 Plate, 115V/230VThe Boekel Scientif (more)ic 270400 Jitterbug 2- MicroplateThermo Shaker 2 Plate is a heated microplate shaker ideal for immunoassayslike ELISA, PCR and other research procedures requiring heating and mixing ofmicroplates. Equipped with a heated lid to provide greater uniformity andprevent condensation. Independently control set temperature, mixing speed andmixing duration. Features Calibration "Mode" Accommodates two or four standard microplates or strip tray Independently set temperature, shaking speed and mixing duration Smooth and quiet operation Heated lid to provide greater uniformity Power Pac is UL, CSA and CE approved 2 Year warranty INCLUDED: The Boekel Scientific 270400 Jitterbug 2 - MicroplateThermo Shaker 2 Plate, 115V/230V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036110235 Hei-PLATE Mix 'n' Heat Expert Basic Sensor Package, 135mm Plate Temperature Range (more) 20 to 350°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - Comprehensive safety features including large safety distance and visual residual heat indicator - Automatic stir bar detector for hassle-free operation - Rotational direction setting for optimal sample mixing - Three-stage setting for stirring speed startup behavior - Programmable ramps and individual profiles for increased precision and reproducibility of experiments - Compatible with Pt1000 temperature sensor and double sensor for simultaneous measurement in sample and bath liquid - Three heating modes: FAST for quick heating, PRECISE and PRECISE+ for exact temperature control without overshoot - Multiple interfaces to ensure compatibility with your lab's data management system The magnetic stirrer Hei-PLATE Mix 'n' Heat Expert convinces with its intuitive handling: Thanks to respectively one display per main function (stirring and heating), you have an easily legible eye on all values and settings at any time. The handling is made via two push-and-rotary controls with LED-rings for an easy identification of the active functions. Separate timers for heating and stirring functions create flexibility and let you control your experiments better. The user-friendly menu navigation makes working with this device particularly easy. For controlling the temperature, you can choose between three heating modes: FAST for a particularly quick heating, as well as PRECISE and PRECISE+ for a particularly exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 as well as the double sensor Pt1000 that allows the measurement in your sample and in the bath liquid simultaneously. For the stirring speed, there is a three-stage setting (start-up behavior). Furthermore, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. As a result, your sample is optimally stirred at any time, even when there are irregularities while stirring. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures 50 °C, protect against burns. The patented Kera-Disk® plate made of anodized aluminum is chemical-resistant, scratch-resistant and has a diameter of 135 mm. This makes it suitable for the use with many accessories and samples on a small footprint. Moreover, the material used allows the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110235 Hei-PLATE Mix 'n' Heat Expert Basic Sensor Package, 135mm Plate includes: - Magnetic Stirrer Hei-PLATE Mix'n'Heat Expert (135 mm diameter) - Pt1000 Temperature Sensor - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

IKA Nanostar 7.5 Digital Overhead Stirrer Stirring quantity max. (H2O) 5 L Speed Range 0/50 - 2000 (more) rpm Viscosity max. 4000 mPas Features - Compact and lightweight design, weighing just 0.8 kg for easy handling and space-saving in the laboratory. - Constant torque throughout the speed range (50 - 2000 rpm), ensuring consistent performance for various applications. - Brushless DC motor with efficient operation and minimal maintenance requirements. - User-friendly operation via a stable rotary knob with an LED display for clear speed indication. - Includes a USB interface for convenient software updates, enhancing functionality over time. The IKA Nanostar 7.5 Digital Overhead Stirrer combines compact design with powerful performance, ideal for laboratories where space efficiency is crucial. Weighing just 0.8 kg and 30% smaller than its predecessor, the Nanostar 7.5 maintains high torque and precise stirring capabilities across its speed range from 50 to 2000 rpm. Featuring a brushless DC motor, it offers reliable operation and minimal maintenance. User-friendly controls via a rotary knob and LED display ensure ease of operation, while a robust housing ensures durability. With a USB interface for quick software updates, the Nanostar 7.5 is designed to meet the evolving needs of modern laboratory environments. INCLUDED: The IKA Nanostar 7.5 Digital Overhead Stirrer includes: - NANOSTAR 7.5 digital - R 300 shaft protector - Fasten screws for R 300 (2x) - chuck key - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Nanostar 7.5 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)5 l Motor rating input32 WMotor rating output22 WMotor principleBrushless DCSpeed displayLEDSpeed range0/50 - 2000 rpmViscosity max.4000 mPasOutput max. at stirring shaft15.7 WPermissible ON time 100 %Torque max. at stirring shaft 7.5 NcmSpeed controlTurning knobSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmNominal torque0.075 NmTimer displaynoneHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)53 x 147 x 130 mmWeight0.8 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input32 WPower input standby0.3 WDC Voltage24 VCurrent consumption1300 mARequest a Formal Quote

LABORATORY INCUBATORS ILW SMART POL-EKO ILW - POWERFUL, FOR MICROBIOLOGICAL TESTS ILW incubators are (more) perfect for the stable and safe incubation of samples, in any working environment. They maintain a constant temperature from 0°C to 70°C (It's necessary to purchase automatic defrosting function, ILW PLUS, for all units operating at set point <=5°C to prevent icing). The version capable of reaching -10 °C is available as an option, while with the SMART PRO version you can expand the heating range up to +100 °C. More! Large touch display, alarms, lock, easy to clean stainless steel interiors will make the use of these incubators a breeze. Thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Available in the special models FOT (SMART version) and FIT (SMART PRO version) FOCUS: Photoperiodic (FOT) and phytotron (FIT) systems allow day/night simulation. While the FOT option allows you to turn the light on and off from the display thanks to a program, with the FIT option you can also control the intensity of the light. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. ILW SMART SERIES POL-EKO offers 5 models of refrigerated incubators with capacities from 56 to 749 litres. The ILW series are only available in the forced air version. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Internal glass door 4 - Shelf 5 - Condenser housing 6 - Solid external door 7 - Temperature sensor 8 - Ventilation 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 12 - Handle with lock 1 - Main switch 2 - Adjustable feet 3 - LAN port 4 - Fuse 5 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the FIT system (phytotron) for the ILW SMART PRO models. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - Automatic defrost function - Version up to -10°C - Reinforced version - Interior light - Photoperiodic system - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Interfurn Drawer door cabinet Creme 600x490x450

This set is the perfect solution for laboratories and institutions requiring the highest precision.  (more)These cylindrical mass standards are made from the highest quality materials, ensuring excellent stability and resistance to environmental changes. Key Features: Highest class of accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Plastic packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. Set Includes: 9 mass standards, 2 pairs of tweezers, 1 brush and 1 pair of gloves. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.