Eppendorf A-4-62 swing-out rotor

Beckman Coulter JS-5.3 Rotor & Buckets Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good used cosmetic condition. Included are the following: 1 x Beckman Coulter JS-5.3 Rotor 4 x Beckman Coulter Bucket

This Sorvall H6000/HBB-6/HLR-6 5000rpm Swinging Bucket Rotor was removed from a university lab where (more) it was surplus to requirements. The unit is in good cosmetic condition with only minor marks from use. It has 6 x 1000ML Buckets. P/N 44040 The rotor is rated for 5000rpm Max. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

This listing is for a Thermo Scientific TX-400 Centrifuge Rotor with Buckets. The unit is in full w (more)orking condition and is ready for immediate release. Supplied with x4- 75003655 Round Buckets Maximize the efficiency of your centrifugation processes with the TX-400 rotor, specifically designed for use with various Thermo Scientific centrifuges. Key Features: Capacity: Accommodates 4 x 400 mL samples, making it suitable for larger volumes in a single run. Impressive RCF: Achieves a maximum relative centrifugal force (RCF) of 4696 x g, allowing for effective sedimentation of a variety of sample types. Speed Capabilities: Operates at a maximum speed of 5000 rpm, providing flexibility for different centrifugation protocols. Tube Specifications: Diameter: 80 mm for standard tubes. Length: Capable of holding tubes up to 125 mm in length. Radius: Designed with a radius of 16.8 cm for optimal performance. Type: Features a swinging bucket design, allowing for smooth and efficient separation as the buckets swing outward during centrifugation. Biocontainment Certified: The rotor is certified for biocontainment by CAMR, ensuring safety when working with biological samples. Compatibility: Specifically designed for use with the following Thermo Scientific centrifuges: Sorvall Legend X1 Sorvall ST 16 Multifuge X1 Megafuge 16 SL 16

Eppendorf 7x50ml Buckets for A-4-81 Rotor, Cat # 022638614 Eppendorf 7x50ml Buckets for A-4-81 Rotor (more), Cat # 022638614. This is a 4 piece set, and the adapters are new in the packaging. The Eppendorf 7x50ml Buckets for A-4-81 Rotor, Cat # 022638614 are for the A-4-81 Rotor in the 5810/R Centrifuges. INCLUDED: The Eppendorf 7x50ml Buckets for A-4-81 Rotor, Cat # 022638614 includes: - Full 6 Month Parts and Labor Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Technical features Flow rate (max.) 5.5 l / min Final vacuum (max.) 160 mbar (abs.) Pressure (max.)  (more)2.4 bar (rel.) Permissible fluid temperature 5-40°C Valve material: FFPM Diaphragm material PTFE coated Pump head material: PPS Applications Filtration Aspiration of liquids Solid phase extraction Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant Compact, silent and reliable Small footprint Maintenance free Download the data sheet for further information and accessories NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Memmert UN30 Natural Convection Oven 32L, 115V Temperature Range Ambient +5°C to 300°C Convection T (more)ype Natural Convection Chamber Volume 32L Features - 32L chamber volume accommodates various sample sizes, enhancing lab versatility - Precise temperature control from +5°C above ambient to 300°C for sensitive applications - Ergonomic PID controller with high-definition TFT display for intuitive adjustments - Durable stainless steel interior and exterior, corrosion-resistant for rigorous use - Natural convection ensures uniform heat distribution for delicate samples - Pre-heated fresh air admixture with adjustable air flap for temperature uniformity - Adaptive settings include programmable temperature, timer, and setpoint wait for workflow optimization - AtmoCONTROL software for data logging and remote monitoring via Ethernet - Easy-to-clean stainless steel interior with reinforced ribbing, ideal for frequent use The Memmert UN30 Natural Convection Oven 32L, 115V delivers precise temperature control from Ambient +5°C to 300°C, making it ideal for a variety of sensitive applications. Featuring an ergonomic digital PID controller with a high-definition TFT display, this oven offers intuitive settings and rapid access to temperature adjustments. Built for rigorous lab environments, its durable stainless steel construction resists corrosion, while the natural convection system ensures even, consistent heating distribution across all samples. Fully adjustable safety controls, including a built-in overtemperature monitor, provide added protection and peace of mind. With an easy-to-clean interior and robust stainless-steel shelving, the UN55 maximizes efficiency in daily operations, delivering reliable performance for years to come. INCLUDED: The Memmert UN30 Natural Convection Oven 32L, 115V includes: - 1 x Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA C 200 auto Semi-Automated Calorimeter w/ Automated Water Handling Measuring Range Max. 40000 J M (more)easuring Time Dynamic Approx. 8 min Cooling Medium Permissable Operating Pressure 2 bar Features - Compact, space-saving, and cost-effective design for educational and low-volume industrial laboratories - Capable of measuring calorific values for liquid and solid samples - Four operation modes: isoperibol, dynamic, manual, and time-controlled (14 min). - Semi-automated system with manual water and oxygen handling, and optional automation available - Closed-loop water circulation with optional RC 2 basic chiller for improved reproducibility and efficiency - Operated via C 6040 CalWin software for monitoring, multi-calorimeter management, and data export - Compatible with DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711, GOST 147, GOST 21261 - Compact dimensions (15.7 x 15.7 x 15.7 in.) and lightweight (46.3 lb.) for ease of installation - Installation and calibration consumables included for seamless setup The C 200 auto package allows operating the C 200 with a completely automated water cycle. This results in ease of handling and saves valuable time especially for laboratories with a low number of analyses. The water circulates in a closed loop and is kept at a constant temperature by using a recirculating chiller. This leads to shorter preparation time for each experiment and even better reproducible results. The semi-automated and conforming to standards combustion calorimeter determines the gross calorific value of liquid and solid samples. So far it has mainly been used for teaching and training purposes at technical schools and universities. Due to the automated water handling it is now also suitable for industrial laboratories with low number of analyses. Four different operation modes enable the user to control the measuring times according to individual requirements: Isoperibol: approx: 17 min. Dynamic : approx. 8 min Manual : approx. 17 min (depends on the operator) Time controlled : 14 min Measurements are possible according to e.g. DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711. The software C 6040 Calwin controls the unit and monitors the measurement of the samples. Additionally, collected data can be exported to e.g. Excel, Word, SQL and LIMS for further analysis. It is possible to operate several calorimeters with one PC. A PC is not part of the scope of delivery and needs to be provided by the operator. Calwin is sold separately. INCLUDED: The IKA C 200 auto Semi-Automated Calorimeter w/ Automated Water Handling includes: - C 200 Measuring Cell - C 5010 Decomposition Vessel - C 248 Oxygen Filling Station - RC 2 Basic Recirculating Chiller - Ignation Adapter - Water Emptying Hose - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.