Laboratory equipment

Small angle Light scattering and imaging device/add-on for Kinexus rheometer. SALSq05 is an optical (more)ly optimized design allowing both Small Angle Light Scattering (SALS) measurements in the polarized (VV) or depolarized (VH) geometry and low magnification microscopy combined with rheology. The device can also be extended to perform Dynamic Light Scattering or Diffusing Wave Spectroscopy under shear and LS-echo measurements. This model is a modular accessory to the Kinexus rheometer (NETZSCH Instruments, ex Malvern).

The optical contact angle measuring and contour analysis systems of the OCA series are high precisio (more)n optical measuring devices for the measurement of interfacial parameters and phenomena.

The MS MultiScan dispersion stability analysis system is a compact and versatile measuring device fo (more)r the optical stability and aging analysis of a variety of multi-phase dispersions, in particular suspensions and emulsions.

The dynamic contact angle measuring devices and tensiometer of the DCAT series are universal measuri (more)ng devices for the force-based measurement of interfacial parameters and phenomena.

The Zeta Potential Analyzer ZPA 20 uses the patented bidirectional oscillating streaming potential a (more)nalysis to measure the zeta potential of fibres, powders and plate shaped solid materials.

With the humidity generators and controllers of the HGC series the relative humidity can be controll (more)ed inside of small measuring chambers.

The spinning drop video tensiometers of the SVT series are special-purpose optical instruments for m (more)easuring extremely low interfacial tensions and rheological properties.

With the Langmuir trough module LTMr it is possible to study monolayers at temperatures up to 90 °C.

The CryoHolder is a unique tool on the market that helps you move frozen cryovials faster, safer and (more) easier. It's very intuitive, enabling you to precisely move the desired vial without the risk of frostbite or the risk of dropping the vial.

Velp refrigerator-thermostat of 169L net that guarantees excellent connectivity and high performance (more) in temperature control. Auto-Tuning thermoregulation system and transparent internal door that allows visual inspection of the contents with LED shelves for crops and fermentation studies and small growth chamber. - Adjustable temperature: from 3°C to 50°C; stability +/- 0.5°C - 169 liter capacity - Equipped with premium Wi-Fi connectivity to VELP Ermes Cloud Platform - Wireless management via TEMPSoft ™ software (optional) - Accepts up to 4 VELP breathing systems Follow the link for more information: https://jointlab.com/gb/refrigerated-thermostat-and-incubator/324-illuminated-incubator-foc-200il-velp.html

System consists of: 1x Sartorius Stedim BioPAT DCU Control Tower 4x Sartorius Stedim Biostat B-DCU B (more)ioreactor Unit 4x Sartorius Stedim Univessel SU Reactor Holder 8x Sartorius PMA7501 Scale 4x Sartorius BB Reactor Heating Blanket 4x Sartorius Filter Heater The Biostat B-DCU is a fermenter/bioreactor specifically designed to accommodate the requirements of process optimization and characterization in the biotech and biopharmaceutical industry. It provides enhanced functionality and an unrivalled level of options for cell culture and microbial processes making it the ideal scale-down model for your large scale process. Supply Tower Gases – Gas supply pressure 1.5 bar (Gasses must be dry, oil and dust-free), connection of gas hoses with d external 6 mm Water – Water supply pressure: 2 – 4 bar, Flow rate up to 20 l/min, Temperature minimum 4°C, Degree of hardness: 12° dH max. Integrated water pressure reduction down to: 1.5 bar Interfaces – 3+ external signal inputs 0–10 V 3+ external signal inputs 4–20 mA Fieldbus for serial or ethernet devices Digital output 24 V for on/off control of external devices Up to 4 analoge outputs for external pumps Connection for control of external drive motor (0–10 V) Dimensions (WxHxD): 360 x 768 x 432 mm Weight: 45 kg Motor drive Rotation speed: 20 – 400 rpm Process Control Temperature: Pt100 0 – 150°C (temperature control 0 – 80°C) Dissolved oxygen: single-use DO sensor patch 0–100% pH: single-use pH sensor patch 6.5 – 8.5 pH Redox: Combined measurement with pH sensor –1,000 –1,000 mV Balance substrate: 7 kg / 1 g Gravimetric flow controller: Accuracy for 7 kg balance 5 g/h O2 offgas: Zirconium dioxide 0–50 vol% CO2 offgas: Infrared 0–10 vol% Temperature control module for UniVessel SU Single-use Culture Vessel With Heating Blanket Electrical heating blanket Temperature control up to 50°C Heating capacity 2 L : 200 W

Capacity: 410 g Readability: 1 mg Repeatability: 0.9 mg Linearity: ±2 mg Calibration type: Internal  (more)Dimensions (WxDxH): 194 x 366 x 276 mm Usable heigh of draft shield: 175 mm Weighing platform: 127 x 127 mm Weight: 7.6 kg

The RAPIDLab 348EX Blood Gas System is the cost-effective solution for smaller laboratories tasked w (more)ith the challenge of performing fast-turnaround critical care tests. Fully-automated operation supports low-to-medium throughput on an easy-to-use analyzer that’s ready to generate accurate, on-demand results when clinicians need them, with a minimum of operator involvement. Measurable Parameters Blood Gas: pH, pCO2, pO2 Measurable Parameters Electrolytes: Na+, K+, Ca++ or Cl– Measurable Parameters Hematocrit: HCT Calculated Parameters: O2SAT, O2CT, HCO3-act, HCO3-std, ctCO2, BEb, BEecf, pO2(A-a), pO2 (a/A), pO2/FiO2, Ca++(7.4), Anion Gap Sample Size: Syringe; 95 µL, Capillary; 95 µL, Microsample mode; 50 µL Sample Type: Whole blood, Dialysate fluid Analysis time: Approximately 60 seconds to result Calibration: Automatic or on demand Input Temperature: 10.0°C–43.9°C Input Hemoglobin: 2.0–25.0 g/dL Input FIO2: 15.0%–100.0% Input Patient/Operator IDs: Up to 16 characters (alphanumeric) Input Sample location: Radial, brachial, femoral, cord, arterial line (with RAPIDComm Data Management System (not inlcuded)) Dimensions (WxDxH): 385 x 353 x 382 mm Weight: 9.4 kg

Sample capacity: one 384 well PCR plate Temperature control range of the block: 4°C to 99°C Gradient (more) range: 1°C to 20°C Temperature range of the gradient: 30°C to 99°C Temperature control range of the lid: 37°C to 110°C Block hmogeneity (at 35°C): ≤± 0.3°C Block hmogeneity (at 90°C): ≤± 0.4°C Control accuracy: ± 0.2°C Heating rate: 4°C/s Cooling rate: 3°C/s Dimensions (WxDxH): 260 x 415 x 370 mm Weight: 18.5 kg

includes one laser: 785 nm, power range on a sample 5-50 mW

includes one laser with optical isolator: 785 nm, power range on a sample 0.5-5 mW

includes one laser: 785 nm, power range on a sample 15-150 mW

includes two lasers: 785 nm, power range on a sample 15-150 mW; 660 nm, power range on a sample 1-32 (more) mW

includes two lasers: 785 nm, power range on a sample 5-50 mW; 660 nm, power range on a sample 1-32 m (more)W

f=30 mm, NA=0.05, laser spot size 50 µm

f=15 mm, NA=0.1, laser spot size 15 µm

f=6.25 mm, NA=0.34, laser spot size 3 µm

Axial Focusing Accessories

Objective Covers Set Accessories

Adapter for Microscopy RMS

Adapter for Microscopy M25/0.75

Adapter for Microscopy M27/1

+ Fluorescence flow cytometry for high quality analysis + Excellent WBC differential + Very low aspi (more)ration volume + Compact + Ready-to-use system with minimum maintenance NEW UNIT !

This is a kit of tissue chip (or organ-on-a-chip) studies to be used directly for tissue emulating e (more)xperiments. It is a blank platform and needs cells and mediums to be supplied by researchers. The kit contains a peristaltic pump, tissue chips (5 pieces with customer selection option), fitting/holders, and tubings.

* DG 1/2/3/4/CC1/CC2 Droplet Generation Microfluidic Chips: These chips that can be used for the pro (more)duction of droplets of various sizes. There are sub models that use T Join and Flow Focusing techniques as production logic. In addition to the existing desig ns (DG CC1/2), there are designs developed by NehirBT (DG 1/2/3/4) in the literature. With these designs, water in oil (w o) or oil in water (o w) emulsions can be created.