HETTICH MIKROLITER 2020 Centrifuge

The Frontier 5306 minimizes noise and interruptions in the laboratory: low input voltage power, sile (more)nt brushless motor and a rubber base that absorbs vibrations. Operator safety: rotor imbalance sensor and two safety switches that immediately stop the rotors if the lid remains open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without pressing any buttons. Operation AC power (included) Structure Silent brushless motor, small footprint Construction features Easy to install design Technical features Speed ​​range: 0 rpm – 6.000 rpm Maximum relative centrifugal force: 2.000 g Maximum flow rate (rotor): 8 x 1,5/2,0 ml Program memories: 0 Acceleration gear: 1 Deceleration gear: 2 Lid lock: mechanic Noise level: ≤60 ± 2 dB (A) Rotor Compatibility: Angled 8 x 1.5 / 2.0ml; Angled 4 x 8 PCR strips Execution time: continuous Safety certification: CE; FCC; TUV The Ohaus Frontier 5306 minimizes noise and interruptions in the lab: low input voltage power, a quiet brushless motor, and a vibration-absorbing rubber base. Operator safety: rotor imbalance sensor and two safety switches that stop the rotors immediately if the lid is left open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without the need to press any buttons. The KIT includes two rotors, described below. Maximum relative centrifugal force (x g) at 2,560 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 45 mm. Maximum relative centrifugal force (x g) at 2,260 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 32 mm. TECHNICAL FEATURES Speed ​​range: 0rpm – 6,000rpm. Maximum relative centrifugal force: 2,000 g. Maximum flow rate (rotor): 8 x 1.5/2.0ml. Program memories: 0. Rotor Pack: 8 x 1.5ml/2.0ml Angled Rotor; angled rotor 4 x 8 PCR strips. Accelerator gear: 1. Deceleration gear: 2. Screen (2): without display. Lid lock: mechanical. Net weight: 1.1kg. Noise level: ≤60 ±2 dB(A). Rotor Compatibility: Angled 8 x 1.5/2.0ml; angled 4 x 8 PCR strips. Rotor recognition method: not applicable. Runtime: Continuous. Safety Certification: CE; FCC; TUV.

Cytocentrifuge based on Hettich Universal 320. Includes 1626 angle rotor for 6 vessels. Vmax: 4,000  (more)rpm; 2,039 g. Includes only 2 vessels with capacity for 4 cytochambers (2 per vessel). Cytochambers (not included) sample capacity from 1 to 8 mL. Maximum capacity 12 cytochambers. More vessels can be independently budgeted to complete maximum capacity. Not refrigerated. Analog rotary control and digital display (10 programs). Emergency stop. Acoustic signal. Includes manual. The Hettich cytology system makes it possible to produce a high-quality cytology preparation from a wide variety of body fluids. With large volume cytology chambers it is possible to process sample volumes of 8 ml or 2 x 8 ml. This makes cell concentration superfluous in many cases. On the other hand, when using the two-step procedure, no cells are lost during sedimentation because the cytology chamber is tightly attached to the slide. Drying is carried out in a second centrifugation step when the cells are already attached to the slide. It also allows the specific preparation of dry or wet preparations. Ideal for urinalysis, abdominal & spinal fluids, cysts, biopsies, ascites, Pap tests, CSF, viral infections, bronchial secretions, pleura, pericardium fluid, fine and needle aspiration among others.

Alresa Digicen centrifuge. Maximum speed adjustable up to 4,300 rpm in 10 rpm steps. Timer from 1 to (more) 99 min. Selectable braking. Includes 4 x 50 mL swing-out rotor. Manual not included. The Alresa Digicen centrifuge is a robust lab instrument that offers a wide range of functions for sample separation. With its modern and compact design, this centrifuge is ideal for use in research, clinical or industrial laboratories. In addition, it features a digital control panel that allows easy programming of centrifugation speed and time, making it a versatile and easy-to-use tool for any laboratory application.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Separating substances at medium rotational speeds: IKA G-L is the ideal midi centrifuge for all type (more)s of separation processes such as those found in molecular biology. It can be used with standard 1.5/2 ml vessels. The cover opens automatically at the press of a button. Capacity: 12 x 1.5/2.0 ml Permitted density: 1.2 kg/dm3 Centrifugal acceleration: 16500 G Speed range: 800 – 15700 rpm Timer: yes Timer display: 7 segment LED Unbalance sensor: yes Quick stop: yes Cover opening: automatic Dimensions (WxHxD): 200 x 140 x 280 mm Weight: 3.9 kg

This listing is for an Eppendorf 5415D Centrifuge The Centrifuge 5415 D is a non-refrigerated bench (more)-top centrifuge and is used in research and routine laboratories in the biosciences, industry, clinics and chemistry.With their space-saving design and user-friendly operating concept, these centrifuges are ideal for everyday routine tasks.The basic functions can be selected using the "SHORT" key and the "TIME" and "SPEED" dial. The values appear in the display in digital form.Power supply: 230 V / 50 – 60 Hz 120 V / 50 – 60 Hz see identification plate Power requirement: 180 W Max. rotational speed: 13,200 rpm Max. centrifugal force: 16,110 rcf Max. load: 24 x 2.0 ml Safe-Lock Micro Test Tubes or 36 x 0.5 ml tubes Max. kinetic energy: 3,100 Nm Max. density of material to be centrifuged: 1.2 g/ml Ambient temperature: 2 °C – 35 °C Max. relative humidity: 75 % Dimensions: Height:230 mm Depth: 310 mm Width: 230 mm Weight (without rotor): 8.5 kg Acceleration time (230 V): < 13 sec. Deceleration time: < 11 sec. Acceleration time (100 / 120 V): < 15 sec. Deceleration time: < 13 sec.

Character communication protocol is designed for communication between RADWAG balance and external d (more)evice via RS232, Ethernet or Wi-Fi* interfaces. The protocol consists of commands sent from the external device to the balance and responses sent from the balance to the device. Responses are sent from the balance each time a command is received as a response to the command. The commands that make up the communication protocol allow you to obtain information about the status of the balance and ways to influence its operation, for example, they allow you to receive weighing results from the balance, control the display, etc.

KNF N 860.1.2 FT.18 IP-54T Diaphragm Pump Ultimate Vacuum 99 mbar Maximum Flow Rate 110L/min (6.6 m (more) 3/h) Protection Class IP54 Features - Clean, 100% oil-free operation - Chemically-resistant PTFE/FFPM flowpath - Ideal for extremely aggressive/corrosive gases and vapors - Compact, quiet and reliable - Can handle wet and highly corrosive gases or vapors - Gastight, leakage rate ratio 6 x 10-3 mbar - Maintenance-free The chemically-resistant series N860.3FTP diaphragm pump is KNF's largest laboratory twin-head unit. There is a wide range of applications for this pump in the lab. It is used especially whenever clean vacuum is required. Examples include vacuum-drying of vacuum oven chambers for drying or heat-treating substances and components or larger rotary evaporators, vessels, filters and textiles. Due to its high resistance to aggressive media, this pump can be used with most all solvents. The heart of these very compact pumps are KNF structured diaphragms (PTFE-coated). These patented diaphragms were stress-optimized using the Finite Elements method. As a result, we were able to make the pumps smaller while increasing the service life of the diaphragm. INCLUDED: The KNF N 860.1.2 FT.18 IP-54T Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Microstar 15 Control Overhead Stirrer Speed Range 0/30 to 1000 RPM Viscosity Max. 8,000 mPas St (more)irring Quantity Max. 10 l Features - Hardened glass enclosed, fast response display for maximumvisibility and chemical resistance - State-of-art vibration sensors detect deviations frompermissible thresholds and automatically stop the process - Clear display for all essential information at a glance - Integrated timer / counter for the control of kineticsensitive reactions and reminders - Viscosities up to 8,000 mPas and volume of up to 10 l - Continuously adjustable speed between 0/30 – 1,000 rpm - USB interface, e.g. for documenting parameters using labworldsoft®or installing firmware updates - Intuitive and simple handling; touch-sensitive surface forlong service life - Temperature reading on display - Chemical resistant housing - Key lock function - Microprocessor-controlled speed governor for constantrotational speed, even with changes in viscosity The new MINISTAR series by IKA: Developed using the latest cutting-edge technology, these high-tech overhead stirrers with compact designs are ideal for special applications. Combining high performance with particular excellence, they require minimal space and come with a lifetime guarantee. These products offer incredible stirring capabilities and control, making them a great cost-effective option for laboratories. With features like hardened glass enclosed displays, state-of-the-art vibration sensors, and microprocessor-controlled speed governors, the MINISTAR series ensures precision and reliability.Capable of handling a wide range of viscosities and volumes, these stirrers provide continuously adjustable speeds, making them versatile and efficient for various applications. See for yourself:

Capacity: 500 L Minimum temperature: -10°C Maximum temperature: 50°C Maximum pressure 16 bar