Thermolyne Roto Mix 50800 Orbital shaker

Sartorius Certomat RM Schüttler Shaker 40 bis 400 rpm + 40 x 250 ml Flask Holder

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€1,000.00 ex VAT

€1,190.00 incl. VAT if applicable

Rocking shaker with incubator ISRK04HDG Ohaus

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Additional Technical Features - ISRK04HDG - Uniformity of ±0.5 at 37°C - Stepper motor drive system - CE safety certification; TUV - Speed accuracy of ±1 rpm - Timer from 1 second to 160 hours

€2,616.00 ex VAT

€3,113.04 incl. VAT if applicable

Orbital shaker SHHD1619DG Ohaus

shakers, incubators

Ohaus heavy-duty orbital shakers These models are designed to handle a wide range of applications, e (more)nsuring constant orbital shaking. Digital models offer accurate speed control for applications that require repeatable results. - Includes a tray and a rubber mat; over 70 accessories as an option - Maintenance free motor - Protect your samples. The increase function allows a gradual increase of the speed up to the set point, to avoid splashing. If so, a sensor detects the unbalance of the load and slows down the speed reaching a safer one Applications Cell cultures, solubility studies, extractions, suspensions and bacterial and yeast cultures, dyes / bleaches, immunoassays, protein studies, absorption techniques Display Easy-to-read independent LED displays with speed and time information, allowing the operator to view both settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) Construction features Integrated tray (279 x 330 mm) with non-slip rubber mat included. Not sure which agitator to choose? Download the Open Air Agitator Selection Guide to get a quick overview of all available models.

€2,060.00 ex VAT

€2,451.40 incl. VAT if applicable

Rocking shaker with incubator ISWV02HDG Ohaus

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Technical Specifications - ISWV02HDG - Uniformity: ±0.5 to 37°C - Drive system: stepper motor - Safety Certification: CE; TUV - Speed Accuracy: ±1 rpm - Timer: 1 second to 160 hours Not sure which agitator to choose? Download the Incubator Shaker Selection Guide to get a quick overview of all available models.

€2,867.00 ex VAT

€3,411.73 incl. VAT if applicable

Loopster D digital rotary shaker IKA

shakers, incubators

Loopster D digital rotary shaker IKA New equipment (never used) Adjustable rotation angle Timer: Cou (more)ntdown, duration adjustable from 1 s to 99 h 59 min. Counter: Display of stirring time Versatile use (delivered without supports) Use at 4 - 50°C in incubators Simple control via membrane keypad Suitable for permanent operation Rotation speed range: 5 - 80 rpm

France

METRIX AM12N AC Current Clamps 40Hz-10kHz 200A *NEW* Original Packed

People are watching right now:

one AC Current Clamps Model AM12N Manuf: METRAWATT GOSSEN / GERMANYdescription: ( all details can (more) be found on the METRÀWATT website ) this instrument can be used with all multimeters from METRAWATT or other manufacturers frequency range...........................................................................................................40 Hz to 10 kHzcurrent measuring range............................................................................................ 0.5 A to 200 Ainput / output ratioCURRENT...................................................................................................................... 1 A / 1 mAVOLTAGE........................................................................................................................ 1 A / 10 mVAccuracy.......................................................................................................................... 1 % Instrument is NEW and ORIGINAL packed and 100 % functional tested Weltweiter Versand Wir verschicken jedes unsererangebotenen Geräte in die ganze Welt!Kauf auf Rechnung Universitäten, staatliche Einrichtungen und Behörden können bei uns auf Rechnung bestellen.Langjährige Erfahrung Wir gehören mit über 15 Jahren Erfahrung zu den etablierten Händlern im Bereich Labor- & Messgeräte.

€108.40 ex VAT

€129.00 incl. VAT if applicable

Leica HCX PL S-APO 63x/1.30 Oil 0.17/E Infinity Objective M25 506292

lamps

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€1,050.00 ex VAT

€1,249.50 incl. VAT if applicable

Medite Medite OTS 30.0 Stretching table

optics

Refurbished Medite OTS 30.0 Stretching table. 6 months warranty. Warm table mainly for operations on (more) small animal operations Features: - Worktop deep black anodized (anodized layer approx. 3x2cm damaged) - Housing varnished - Mains switch with mains indicator lamp green - mains fuse - Connection cable with Schuko plug Technical data: - Width: 15 cm Depth: 20 cm - The infinitely variable temperature control up to + 100° C

€245.00 ex VAT

general laboratory equipment other

Thermo Scientific ULT185-5-V Benchtop Ultra Low Freezer 28L 230V

Manufacturer: Thermo Scientific / Revco Model: ULT185-5-V Benchtop Ultra Low Freezer P/N: ULT185-5-V (more) Description: Air-cooled refrigeration systems are engineered to maintain design temperatures in warm 32°C (90°F) ambient conditions Solid-state control system with adjustable temperature setpoint Digital temperature display resolution to 1°C Cabinet Construction Compact 25.2" x 30.7 in. (640 mm x 781 mm) footprint Industrial-grade hermetically sealed refrigeration compressors All-steel cabinet with high-impact epoxy finish for easy cleaning 4 in. (102 mm) foamed-in-place, CFC-free urethane insulation to protect product against high ambient conditions Heavy-duty counterbalanced lid with key lock Thermal interior sublid Control System Solid-state control system with adjustable temperature setpoint Digital temperature display resolution to 1°C Push button setpoint display Key operated main power switch Alarm System Integrated preset overtemperature safety alarm with battery back-up and audible warning of temperature deviation Exterior alarm contacts for connection to remote monitoring system Specifications: 2ml Vial Capacity per Freezer: 1600 Access Security: key lock Capacity : 28 L Display: Push Button LED Dimensions (LxWxH) Exterior: 64.8 x 78.1 x 50.8 cm Dimensions (DxWxH) Interior: 30.5 x 38.7 x 24.5 cm Mains: 230V 50 Hz (12A) Holds: 16 Boxes Insulation: Polyurethane Foam Shipping Weight: 86 kg Temperature Range: -50° to -80°C Type: Ultra Low Freezer, Benchtop Interior: painted steel Items delivered: - Thermo Scientific Revco ULT185-5-V Benchtop Ultra Low Freezer -80C 28L - Instruction Manual - Power Cord The laboratory freezer fully functional tested. Great cosmetic and technical condition.

€2,950.00 ex VAT

€3,510.50 incl. VAT if applicable

freezers, heating & cooling

Varian SPS-5 Autosampler

For sale: refurbished Varian SPS-5 Autosampler Also available: SPS3 sampler and other options if n (more)eeded Other Atomic Absorption Systems like Varian 220FS, 220Z Furnance, 240Z Furnance, Perkin Elmer series New and used parts for Agilent and Varian AAS systems We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We can deliver maintenance and repair services by our own engineers The SPS-5 Sample Preparation System is a random-access autosampler which can be connected to all of the AA, ICP and UV spectrometers currently manufactured by Varian. It can hold up to 500 samples when the optional rear rack extension is fitted. A fume hood is also available. A range of rack types is available for different test tube sizes. Rack hole sizes can be further customized with the 60 position (Type 25) rack for different test tube diameters. The SPS-5 is compatible with the optional on-line Auto-Diluter. The SPS-5 autosampler includes rinse station, two racks (Type 25 and Type A) and inert probe. Standard configuration allows up to three sample or standard racks to be used at once. With the optional rack extension, up to five racks may be accommodated. Racks must be ordered separately. The autosampler requires but does not include test tubes/bottles. The SPS-5 is also available in a fibreoptic autosampler version for use with the Cary 1, 3, 4, 5, 50, 100, 300, 400 and 500 with the Cary WinUV software. Version 2 of the WinUV software does not support use of the SPS-5 with the normal liquid sampling probe nor does it support the optional Diluter. Rack recognition To reduce the risk of operator error, the SPS-5 features Magnetic Rack Recognition (MRR). Each rack has an embedded magnet which is detected by sensors in the SPS-5. The SPS-5 can detect rack presence and type, minimizing the risk of operator error during rack changes. Rack types The SPS-5 can be fitted with five different rack types, catering for a range of sample vessels: Rack type Capacity Tube volume (nominal) Type 10 100 10 mL Type 25 60 25 mL Type 50 35 50 mL Type A 12 125 mL Type B 6 500 mL The Type 25 rack can be fitted with adapters to hold small diameter test tubes. The Type A and B racks are supplied with vessels. All racks are made from chemical-resistant polypropylene. Probe height The height of the SPS-5 probe can be programmed so that you can sample from a particular layer in a sample or avoid aspirating sediment from the bottom of a vessel. Diluter An optional Diluter can be fitted to the SPS-5. This can be used for off-line standard and sample preparation prior to a run. It can also be used to perform on-line dilutions for some techniques.The Diluter’s design ensures that the syringe is never contaminated. After dispensing any solution into a sample vessel, the SPS-5 will mix the contents with the probe. The probe is simultaneously vibrated horizontally and moved up and down through the solution. Splashing is eliminated as the probe height is set in response to the volume in the vessel.

Netherlands

automated liquid handling

Products

Dostmann professional infrared thermometer ScanTemp 450 Infrared thermometers use this technology to (more) measure the surface temperature of materials, regardless of the proximity or otherwise of the measurement object. Just aim, pull the trigger and read the temperature (response time about 0.5 seconds). Not coming into direct contact with the material, this technology provides the possibility to measure hot, dangerous and difficult to reach materials safely, without contaminating or damaging them. - Type K thermocouple probe input - Wide range of temperatures: - Infrared: -60 ... +500°C - Thermocouple: -64 ... +1400°C - With circular laser sight - Large display with simultaneous display of reading and Max / Min or Alarm - Belt bag included - HOLD-MAX / MIN / DIF / AVG function (keeps various measurements on the display, such as maximum and minimum) - Tatso lock function for continuous measurement Application: Detect problems with keeping a process at temperature Food safety (HACCP) HVAC Electrical maintenance Intangible parts (fresh paint) Road construction Commercial printing Plastic molding Car maintenance Technical features Temperature range: -60°C ... +500°C, (thermocouple input: -64 ... +1400°C) Accuracy: ± 2.0% of reading or ±2°C, whichever is greater Spectral response: 6 - 14 µm Display resolution: 0.1°C (above 200°: 1°) Working temperature: 0°C ... 50°C Distance - spot size: 11:1 Power supply: 2 AAA batteries, with about 270 hours of operation Dimensions (L x W x H): 175.2 x 39 x 7.9 mm Weight: 140g

€45.00 ex VAT

€53.55 incl. VAT if applicable