Hettich Adapter 1443 4 x 50 mL tube

*No email thread or information provided on project page* Beckman Coulter JA-14 Fixed Angle Rotor Th (more)is item was removed from a university lab where it was surplus to requirements. The unit is in good condition with some wear. No further testing has been conducted. Specifications:- Max RPM: 14,000 - Model: JA-14 - Serial No.: 95E 2155 - 6 x 500 mL

This Sorvall SLC-4000 Fixed Angle Centrifuge Rotor PTI F9S-4x1000 was removed from a university lab  (more)where it was surplus to requirements. The unit is in good cosmetic condition with only minor marks from use, though it has not been tested and will need to be inspected by a qualified engineer before it is used again. Specs;7,000rpm9,220 x gHolds: 4 X 100ml

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hermle Z327-200-AC 4 x 200 ml Swing Out Rotor, No Buckets The Hermle Z327-200-AC 4 x 200 ml Swing Ou (more)t Rotor is for use with Hermle Z327 and Z327-K centrifuges. This rotor has a maximum speed of 5,000 RPM, and a maximum capacity of 4 x 200 ml. Its wide variety of adapters make it an adaptable option for a wide variety of applications and research needs. INCLUDED: The Hermle Z327-200-AC 4 x 200 ml Swing Out Rotor, No Buckets includes: - Hermle Z327-200-AC 4 x 200 ml Swing Out Rotor - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 The Eppendorf Plat (more)e Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 are designed for use with the Eppendorf S-4-104 Swing Bucket Rotor. These plate buckets feature an aerosol-tight capable cap design (aerosol-tight caps not included), ensuring that samples remain safe and secure during centrifugation. With a maximum capacity of 4 microplates per bucket, 2 cell culture plates per bucket, or 1 deepwell plate per bucket, these plate buckets are ideal for a wide range of applications, including cell culture, protein purification, and nucleic acid isolation. The plate buckets' maximum speed of 3,900 RPM and maximum RCF of 2,568 x g make them capable of high-speed separations, while their 15.1 cm maximum radius ensures efficient sample processing. Overall, the Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 are a valuable accessory for researchers and scientists who require efficient, safe, and reliable plate buckets for use within the Eppendorf 5810/R Centrifuges. INCLUDED: The Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 includes: - Set of 2 Buckets - Full 6 Month Parts and Labor Warranty Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 SpecificationsMaximum Speed3,900 RPMMaximum RCF2,568 x gMaximum Capacity4 x Microplates Per Bucket2 x Cell Culture Plates Per Bucket1 x Deepwell Plate Per BucketMaximum Radius15.1 cmRotor CompatibilityEppendorf S-4-104 Swing Bucket Rotor

Eppendorf A-4-38 Swing Bucket Rotor with Buckets Eppendorf A-4-38 Swing Bucket Rotor with Buckets, C (more)at # 022638048, new in box. The Eppendorf A-4-38 Swing Bucket Rotor with Buckets comes with 1 set of 4x7 and 1 set of 4x10 adapters. The A-4-38 Rotor is used in the Eppendorf 5702 and 5702R Benchtop Centrifuges. INCLUDED: The Eppendorf A-4-38 Swing Bucket Rotor with Buckets includes: - Buckets - 1 Set of 4x7 mL Adapters - 1 Set of 4x10 mL Adapters - Full 1 Year Parts and Labor Warranty Eppendorf A-4-38 Rotor SpecificationsMax Speed4,400 RPMMax RCF3,000 x gMax Capacity4 x 7mL 4 x 10mL Volumes up to 100mLRequest a Formal Quote Frequently Purchased WithEppendorf 4 x 7 Vacutainer Adapters, Cat. # 022639242Add to Cart +Eppendorf 4 x 10ml Vacutainer Adapters, Cat. # 022639269Add to Cart .fpt-container { width: 79%;}.fpt-box { width: 45%;}

Lifting platform Rudolf Grauer Boy 110. Aluminum and stainless steel. Load max. 50 kg Size of platfo (more)rm-12x14 cm Lift style scissor. Control of manual adjustment. Specifications: Height of extension: 14 cm Height folded: 4 cm Ideal for use in fume-hoods fume, the media lab are lifting platforms ultra-stable able to hold a variety of items such as glassware, hot plates, baths and magnetic stirrers. The button adjustment allows height adjustment easy and precise. Constructed of aluminum and stainless steel and with a top plate 12x14 cm, With its system of lift-style scissor, this cat in the laboratory is able to withstand loads of up to approximately 50 kg It is recommended that the cat be lifted as close to the desired height as possible, before the weight is put on it and make final adjustments.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

THB sensor THB sensor is a device measuring ambient conditions, it cooperates with: a computer (1 se (more)nsor via USB 2.0 port); direct cooperation, a weighing device (1 sensor via USB 2.0 port); direct cooperation, a THBR Box (up to 4 sensors connected to THBR Box via USB 2.0 port). The THB sensor is designed to measure parameters such as temperature, humidity, pressure, air density and vibrations level. Sensor registers level of permissible vibrations at the workstation, wherein the values of vibrations level are displayed within 0 - 100% range versus reference values in laboratory conditions. Values exceeding 100% threshold inform about potential occurrence of error greater than permissible error of mass measurement performed using weighing device. Each sensor has its own identification number that is assigned to measurements saved to the database. Ambient conditions can be monitored using: weighing instrument display website Windows OS application: THB Single or THB Multi Android application. On the basis of sent measurements, the THB Single or THB Multi software determines air temperature, humidity, pressure, density and permissible vibrations factor.

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.

Tuttnauer 5075ELP Lab Line Benchtop AutoclaveFeatures - Designed to autoclave everything in your lab (more), including liquids - Take advantage of Tuttnauer’s state-of-the-art control system with multi-color display - Automatic pressure locking system, door will not open when the chamber is over pressured - Integrated printer documents date, time, temperature and pressure - No water utility connections needed, just plug in and add water - Two integrated temperature probes for complete sterilization of liquids - Four validated cycles (glass, plastic, liquid A and liquid B-waste) - Stores up to 200 past cycles you can open on your PC - Create up to 16 custom cycles - Comes with 8 factory set cycle programs that cover the processing needs of most laboratories and research centers - Optional biohazard filter (BH) prevents contaminated air from exhausting into the lab Advanced multi-color control panel features intuitive method readouts in a multitude of languages. 316 Ti grade high quality stainless steel chamber and door with electro-polish finish allows for long product life and ease of periodic cleaning Designed to save space on your laboratory workbench, the 5075ELP is a front-loading benchtop autoclave that provides high quality, repeatable performance and accountability for a wide range of applications used in modern laboratories. The 5075ELP has an advanced multi-color control panel and a chamber made of 316 Ti stainless steel. Each model has several optional added-value features which can be configured for fast cooling, efficient drying, biohazard and waste sterilization, F0 control, and more. INCLUDED: The Tuttnauer 5075ELP Lab Line Benchtop Autoclave includes: - 3 Trays - Tray Holder - Base Plate - Autoclave Stand - 2 Buck Boost Transformers - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty